Api doc

docs/NTP.md

@@ -0,0 +1,49 @@
+# NTP
+
+<strong>Import OPBNOS API</strong>
+
+```py
+import opb_api as opbapi
+```
+
+<strong>Initialize client</strong>
+<p>Use the appropriate JSON file that corresponds to the targetted device name. This JSON file should contain request body parameters corresponding to any potential configuration/post requests.
+
+```py
+node = opbapi.connect_to('SN2010')
+```
+
+<strong>Configure NTP server</strong>
+<p>In order to configure NTP server information, the API, configNTP(), must be invoked with the server IPv4 as input parameters.
+```py
+node.configNTP(ip="128.123.123.123")
+```
+<table>
+ <tbody>
+  <thead>
+    <tr>
+      <th>Attribute</th>
+      <th>Values</th>
+      <th>Description</th>
+    </tr>
+  </thead>
+  <tbody>
+    <tr>
+      <td>ip</td>
+      <td>"128.XXX.XXX.XXX"</td>
+      <td>NTP server IPv4 value</td>
+    </tr>
+  </tbody>
+</table>
+
+<strong>Get/Show NTP server</strong>
+<p> Retrieves NTP servers details
+
+```py
+node.execute(['show ntp'])
+```
+<strong>Output</strong>
+<p> This is an example of the output of the above command:
+```py
+Not added yet.
+```

docs/ZTP.md

@@ -0,0 +1,49 @@
+# ZTP
+
+<strong>Import OPBNOS API</strong>
+
+```py
+import opb_api as opbapi
+```
+
+<strong>Initialize client</strong>
+<p>Use the appropriate JSON file that corresponds to the targetted device name. This JSON file should contain request body parameters corresponding to any potential configuration/post requests.
+
+```py
+node = opbapi.connect_to('SN2010')
+```
+
+<strong>Configure ZTP</strong>
+<p>In order to enable or disable ZTP, the API, configZTP(), must be invoked with dictionary input within the object, 'dt'.
+```py
+node.configZTP(dt = {"ztp_status":"enable | disable"})
+
+<strong>Get/Show ZTP server</strong>
+<p> Retrieves ZTP status
+
+```py
+node.execute(['show ztp status'])
+```
+<strong>Output</strong>
+<p> This is an example of the output of the above command:
+```py
+b'{{"ztp-status": "disabled"}}
+```
+<p> The below table lists and describes input and output attributes:
+<table>
+ <tbody>
+  <thead>
+    <tr>
+      <th>Attribute</th>
+      <th>Values</th>
+      <th>Description</th>
+    </tr>
+  </thead>
+  <tbody>
+    <tr>
+      <td>"ztp_status"</td>
+      <td>"enable|disable"</td>
+      <td>indicates whether ztp enable or disable on the system</td>
+    </tr>
+  </tbody>
+</table>

docs/boot.md

@@ -0,0 +1,56 @@
+# Boot
+
+<strong>Import OPBNOS API</strong>
+
+```py
+import opb_api as opbapi
+```
+
+<strong>Initialize client</strong>
+<p>Use the appropriate JSON file that corresponds to the targetted device name. This JSON file should contain request body parameters corresponding to any potential configuration/post requests.
+
+```py
+node = opbapi.connect_to('SN2010')
+```
+
+<strong>Get System Boot information</strong>
+
+<py> : Retrieves system boot information.
+
+```py
+node.execute(['show boot'])
+```
+<strong>Output</strong>
+
+```py
+b'{"BootInfo": {"Next": "OPBNOS-master.192-dirty-20230831.072719", "Available": "OPBNOS-master.192-dirty-20230831.072719", "Current": "OPBNOS-master.192-dirty-20230831.072719"}}'
+```
+
+<p> The below table has a list of attributes that pertain to this particular API:
+<table>
+ <tbody>
+  <thead>
+    <tr>
+      <th>Attribute</th>
+      <th>Values</th>
+      <th>Description</th>
+    </tr>
+  </thead>
+  <tbody>
+    <tr>
+      <td>"Next"</td>
+      <td>"OPBNOS-master.192-dirty-20230831.072719"</td>
+      <td>next boot device</td>
+    </tr>
+    <tr>
+      <td>"Available"</td>
+      <td>"OPBNOS-master.192-dirty-20230831.072719"</td>
+      <td>available boot device</td>
+    </tr>
+    <tr>
+      <td>"Current"</td>
+      <td>"OPBNOS-master.192-dirty-20230831.072719"</td>
+      <td>current boot device</td>
+    </tr>
+  </tbody>
+</table>

docs/clock.md

@@ -0,0 +1,51 @@
+# System Clock
+
+<strong>Import OPBNOS API</strong>
+
+```py
+import opb_api as opbapi
+```
+
+<strong>Initialize client</strong>
+<p>Use the appropriate JSON file that corresponds to the targetted device name. This JSON file should contain request body parameters corresponding to any potential configuration/post requests.
+
+```py
+node = opbapi.connect_to('SN2010')
+```
+
+<strong>Get/Show Clock Information</strong>
+<p> Retrieves system clock information
+
+```py
+node.execute(['show clock'])
+```
+<strong>Output</strong>
+<p> This is an example of the output of the above command:
+```py
+b'{"currentTime": "Sat 07 Oct 2023 01:12:59 AM UTC"}'
+```
+
+<p> The below table lists and describes input and output attributes:
+<table>
+ <tbody>
+  <thead>
+    <tr>
+      <th>Attribute</th>
+      <th>Values</th>
+      <th>Description</th>
+    </tr>
+  </thead>
+  <tbody>
+    <tr>
+      <td>"currentTime"</td>
+      <td>"Sat 07 Oct 2023 01:12:59 AM UTC"</td>
+      <td>indicates current server clock (time, date, day and timezone)</td>
+    </tr>
+  </tbody>
+</table>
+
+<strong>Note: Output of clock API</strong>
+<p> API will not produce any output unless the below status code in produced, indicating a server error.
+```py
+Status : 500 -> Response : b'500'
+```

docs/counters.md

@@ -0,0 +1,78 @@
+# Counters
+<p> Shows and Configures performance counters
+<strong>Import OPBNOS API</strong>
+
+```py
+import opb_api as opbapi
+```
+
+<strong>Initialize client</strong>
+<p>Use the appropriate JSON file that corresponds to the targetted device name. This JSON file should contain request body parameters corresponding to any potential configuration/post requests.
+
+```py
+node = opbapi.connect_to('SN2010')
+```
+
+<strong>Get/Show Interface Counters</strong>
+
+<py>: Retrieves available performance counter
+
+```py
+node.execute(['show interface counters'])
+```
+<strong>Output</strong>
+```py
+b'{"Ethernet1_1": {"IF_IN_OCTETS": 0, "IF_IN_UCAST_PKTS": 0, "IF_IN_NON_UCAST_PKTS": 0, "IF_IN_DISCARDS": 0, "IF_IN_ERRORS": 0, "IF_OUT_OCTETS": 0, "IF_OUT_UCAST_PKTS": 0, "IF_OUT_NON_UCAST_PKTS": 0, "IF_OUT_DISCARDS": 0, "IF_OUT_ERRORS": 0, "IF_IN_MULTICAST_PKTS": 0, "IF_OUT_MULTICAST_PKTS": 0}, "Ethernet2_1":{...}...}
+```
+
+<strong>Clear Interface Counters</strong>
+<p>In order to delete all interface counters, the API, configInterfacesCounters(), can be invoked with no paramters.
+```py
+node.configInterfacesCounters()
+```
+
+<strong>Get/Show Interface Counters - Ethernet specific</strong>
+<py>: Retrieves Interface counter information as per the specified ethernet
+
+```py
+node.execute(['show interface counters <Ethernet1_1>'])
+```
+<strong>Output</strong>
+```py
+b'{"Ethernet1_1": {"IF_IN_OCTETS": 0, "IF_IN_UCAST_PKTS": 0, "IF_IN_NON_UCAST_PKTS": 0, "IF_IN_DISCARDS": 0, "IF_IN_ERRORS": 0, "IF_OUT_OCTETS": 0, "IF_OUT_UCAST_PKTS": 0, "IF_OUT_NON_UCAST_PKTS": 0, "IF_OUT_DISCARDS": 0, "IF_OUT_ERRORS": 0, "IF_IN_MULTICAST_PKTS": 0, "IF_OUT_MULTICAST_PKTS": 0}}
+```
+
+<strong>Clear Flow Counters</strong>
+<p>In order to clear opb flow counters, the API, clearFlowCounters(), can be invoked with no paramters.
+```py
+node.clearFlowCounters(flow="flow1", r_id="1")
+```
+<p> The below table lists and describes input attributes:
+<table>
+ <tbody>
+  <thead>
+    <tr>
+      <th>Attribute</th>
+      <th>Values</th>
+      <th>Description</th>
+    </tr>
+  </thead>
+  <tbody>
+    <tr>
+      <td>"flow"</td>
+      <td>"flow1"</td>
+      <td>flow identification</td>
+    </tr>
+    <tr>
+      <td>"r_id"</td>
+      <td>int</td>
+      <td>rule id number</td>
+    </tr>
+  </tbody>
+</table>
+
+<strong>Note: Output of clear APIs</strong>
+<p> APIs will not produce any output unless the below status code in produced, indicating a server error.
+```py
+Status : 500 -> Response : b'500'
+```

docs/cpuUtil.md

@@ -0,0 +1,51 @@
+# CPU Utilization
+
+<strong>Import OPBNOS API</strong>
+
+```py
+import opb_api as opbapi
+```
+
+<strong>Initialize client</strong>
+<p>Use the appropriate JSON file that corresponds to the targetted device name. This JSON file should contain request body parameters corresponding to any potential configuration/post requests.
+
+```py
+node = opbapi.connect_to('SN2010')
+```
+
+<strong>Get/Show CPU Utilization</strong>
+<p> Retrieves system CPU utilization
+
+```py
+node.execute(['show cpu util'])
+```
+<strong>Output</strong>
+<p> This is an example of the output of the above command:
+```py
+b'{"%CPU_Util": "14.249999999999998"}'
+```
+
+<p> The below table lists and describes input and output attributes:
+<table>
+ <tbody>
+  <thead>
+    <tr>
+      <th>Attribute</th>
+      <th>Values</th>
+      <th>Description</th>
+    </tr>
+  </thead>
+  <tbody>
+    <tr>
+      <td>"CPU_Util"</td>
+      <td>float</td>
+      <td>indicates average CPU usage</td>
+    </tr>
+  </tbody>
+</table>
+
+<strong>Note: Output of the API</strong>
+<p> API will not produce any output unless the below status code in produced, indicating a server error.
+```py
+Status : 500 -> Response : b'500'
+```