docs: add alert for behavior change

AlvinSchiller · May 8, 2024 · c76de80 · c76de80
1 parent 370490b
commit c76de80
Showing 1 changed file with 5 additions and 0 deletions.
diff --git a/components/gpio_control/README.md b/components/gpio_control/README.md
@@ -68,6 +68,11 @@ However, a button has more parameters than these. In the following comprehensive
 
 
   Holding the button even longer than `hold_time` will cause no further action unless you are in the `Repeat` or `SecondFuncRepeat` mode.
+
+  > [!IMPORTANT]
+  > Since v2.8.0 the behavior for `SecondFunc` and `SecondFuncRepeat` has changed. The secondary function is no longer triggered additionally to the primary function.
+  > Now its called exclusively if `hold_time` is reached. The primary function will only be triggered if the button is pressed shorter then `hold_time`! 
+  > Existing configurations may need to adapt to this.
   
 * **hold_time**: Reference time for this buttons `hold_mode` feature in seconds. Default is `0.3`. This setting is ignored if `hold_mode` is unset or `None`
 * **functionCall2**: Secondary function, default is `None`. This setting is ignored unless `hold_mode` is set to `SecondFunc` or `SecondFuncRepeat`.