A open source hackable handheld for DIY.
The Hackheld Vega is made to be as simple as possible. Made up of just a D1 Mini, OLED, RGB LED and a couple of buttons! It can run the ESP8266 Deauther, but you can also write your own firmware using Arduino.
Part | Amount | Description | Link (affiliate) |
---|---|---|---|
D1 Mini | 1 | Wemos/Lolin D1 Mini ESP8266 Dev Board | https://s.click.aliexpress.com/e/_99hh4H |
1.3" OLED SH1106 | 1 | I2C (4Pin) Make sure its pins are in this order (left to right): VDD,GND,SCK,SDA (The position of GND is important, it must be the second pin! The other pins can sometimes have slightly different labels) | https://s.click.aliexpress.com/e/_9gf1BF |
Buttons | 6 | 6x6mm 4pin tactile push button | https://s.click.aliexpress.com/e/_9IwWtj |
Neopixel | 1 | RGB LED WS2812B 5050 | https://s.click.aliexpress.com/e/_9fRrPj |
PCB | 1 | Download Gerbers | - |
3D Printed Case | 1 | Download STL | - |
Case screws | 4 | M2.5 screws (I used 6mm long screws) | https://s.click.aliexpress.com/e/_9QSLrc |
Additionally, you will need 4 M2.5 screws to connect the PCB to the case.
You can write your own code for it, or run the ESP8266 Deauther V2 (You can download a bin file here)