a_master_c3_mini.yaml

#------------------------------
#-- a_master_c3_mini.yaml
#-- Petit code générique minimaliste pour des projets à base d'esp32-c3 mini lolin
#-- ATTENTION: je ne sais pas pourquoi mais il faut le flasher via web.esphome.io (maintenir la touche BOOT pendant le RESET), via le port USB en ESPHOME cela ne fonctionne pas !
#-- REMARQUE: xxx
#-- location: xxx
#-- zf230302.1844, zf230502.1132
#--
# sources: 
# 

esphome:
  name: a_master_c3_mini
  # platformio_options:
  #   board_build.flash_mode: dio
  on_boot:
  - light.turn_on:
      id: a_master_c3_mini_rgb
      brightness: 100%
      red: 100%
      green: 0%
      blue: 0%
  - delay: 1s
  - light.turn_off:
      id: a_master_c3_mini_rgb
  - delay: 1s
  - light.turn_on:
      id: a_master_c3_mini_rgb
      brightness: 30%
      red: 0%
      green: 100%
      blue: 0%
  - delay: 1s
  - light.turn_off:
      id: a_master_c3_mini_rgb

esp32:
  board: esp32-c3-devkitm-1
  # framework:
    # type: esp-idf
    # version: recommended





# Configuration WIFI
wifi:
  ssid: !secret wifi_ssid_apzuzu7
  password: !secret wifi_pass_apzuzu7

  # networks:
  
  #   - ssid: !secret wifi_ssid_apzuzu7
  #   - password: !secret wifi_pass_apzuzu7
    
  #   - ssid: !secret wifi_ssid_apzuzu6
  #   - password: !secret wifi_pass_apzuzu6

  #   - ssid: !secret wifi_ssid_3G_zf
  #   - password: !secret wifi_pass_3G_zf2
    
  #   - ssid: !secret wifi_ssid_3G_zf2
  #   - password: !secret wifi_pass_3G_zf2
    
  #   - ssid: !secret wifi_ssid_3g_s7
  #   - password: !secret wifi_pass_3g_s7
    
  #   - ssid: !secret wifi_ssid_apzuzu6_EXT
  #   - password: !secret wifi_pass_apzuzu6_EXT


  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "a_master_c3_mini Fallback"
    password: !secret ap_wifi_password

captive_portal:

# Enable logging
logger:
    level: VERBOSE

# Enable Home Assistant API
api:
  password: !secret api_password

ota:
  password: !secret ota_password

# WEB Server
web_server:
  port: 80



# Définition des lights
light:
  # LED RGB sur le mini c3 GPIO7
  - platform: neopixelbus
    type: GRB
    variant: WS2812
    pin: GPIO7
    num_leds: 1
    name: "a_master_c3_mini RGB"
    id: a_master_c3_mini_rgb
    default_transition_length: 0s



# Définition des Switch's
switch:
  - platform: template
    name: "a_master_c3_mini LED"
#    inverted: True
    id: led
    optimistic: true
    on_turn_on:
      - light.turn_on:
          id: a_master_c3_mini_rgb
          brightness: 30%
          red: 0%
          green: 0%
          blue: 100%
    on_turn_off:
      - light.turn_off:
          id: a_master_c3_mini_rgb

  - platform: restart
    name: "a_master_c3_mini Restart"


# Définition du bouton physique sur le mini c3 GPIO9
binary_sensor:
  - platform: gpio
    pin:
      number: GPIO9
      mode: INPUT_PULLUP
      inverted: True
    name: "a_master_c3_mini button"
    on_press:
      - switch.toggle: led


# Définition des Sensors
sensor:
  - platform: wifi_signal
    name: "a_master_c3_mini Signal Wi-Fi"
    update_interval: 5s

  - platform: uptime
    name: "a_master_c3_mini uptime"
    update_interval: 5s


# Définition des Sensors text
text_sensor:
  - platform: version
    name: "a_master_c3_mini Version 1150"

  - platform: wifi_info
    ip_address:
      name: a_master_c3_mini IP Address
      id: wifi_ip
    ssid:
      name: a_master_c3_mini Connected SSID
      id: wifi_ssid


# Définition des inputs numbers
number:
  - platform: template
    name: "a_master_c3_mini consigne alarme low"
    id: a_master_c3_mini_consigne_alarme_low
    restore_value: true
    optimistic: true
    mode: box
    min_value: 0.0
    max_value: 0.8
    step: 0.01
    initial_value: 0.4
    unit_of_measurement: "V"




# font:
# #https://github.com/JotJunior/PHP-Boleto-ZF2/blob/master/public/assets/fonts/arial.ttf
#   - file: 'arialn.ttf'
#     id: font1
#     size: 10
#   - file: 'arialn.ttf'
#     id: font2
#     size: 13

# i2c:
#   sda: GPIO05
#   scl: GPIO06
#   scan: true
#   frequency: 200kHz

# display:
# # http://www.esp8266learning.com/wemos-oled-shield-example.php
# # https://esphome.io/api/namespaceesphome_1_1display.html
#   - platform: ssd1306_i2c
#     model: "SSD1306 64x48"
#     address: 0x3C
#     invert: true
#     update_interval: 3s
#     lambda: |-

#       // Turn the whole display on.
#       //it.fill(COLOR_ON);
#       // Turn the whole display off.
#       //it.fill(COLOR_OFF);

#       // For example, draw a line from [x=0,y=0] to [x=50,y=50]
#       it.line(0, 0, 50, 50);

      
#       // Print "Hello Zuzu" for fonts tests in top center.
#       it.print(32, 20, id(font2), TextAlign::TOP_CENTER, "Hello 3400");



#



      # // Print inside temperature (from homeassistant sensor)
      # it.printf(0, 7, id(font1), TextAlign::BASELINE_LEFT, "In side");
      # if (id(inside_temperature).has_state()) {
      #   it.printf(64, 7, id(font1), TextAlign::BASELINE_RIGHT , "%.1f°C", id(inside_temperature).state);
      # }

      # // Print outside temperature (from homeassistant sensor)
      # it.printf(0, 16, id(font1), TextAlign::BASELINE_LEFT, "Out side");
      # if (id(outside_temperature).has_state()) {
      #   it.printf(64, 16, id(font1), TextAlign::BASELINE_RIGHT , "%.1f°C", id(outside_temperature).state);
      # }      
      
      # // Print TVOC (from homeassistant sensor)
      # it.printf(0, 25, id(font1), TextAlign::BASELINE_LEFT, "TVOC");
      # if (id(outside_temperature).has_state()) {
      #   it.printf(64, 25, id(font1), TextAlign::BASELINE_RIGHT , "%.0f", id(tvoc).state);
      # }      

      # // Print "L'état du input text de HA: <state>" in midle center
      # it.printf(32, 36, id(font2), TextAlign::BASELINE_CENTER, "%s", id(alarm_state).state.c_str());

      # // Print time in HH:MM format
      # it.strftime(32, 48, id(font1), TextAlign::BOTTOM_CENTER, "%d-%m %H:%M:%S", id(esptime).now());



# # Gestion des timers
# interval:


# # Timer pour calculer le temps passé à avancer !
#   - interval: 2s
#     then:
#       - light.turn_on:
#           id: a_master_c3_mini_rgb
#           brightness: 30%
#           red: 100%
#           green: 0%
#           blue: 0%

#       - delay: 1s

#       - light.turn_on:
#           id: a_master_c3_mini_rgb
#           brightness: 0%
#           red: 100%
#           green: 0%
#           blue: 0%