Skip to content

Latest commit

 

History

History
30 lines (27 loc) · 2.12 KB

README.md

File metadata and controls

30 lines (27 loc) · 2.12 KB
Raw

Raspberry Pi iot project based on IFTTT and NODE

Code for 4 channel relay (or GPIO pins) and ifttt

Uses dataplicity wormhole and ifttt web request

Setup

Update to latest raspbian sudo apt-get update && sudo apt-get upgrade and install from here
Setup dataplicity from here
Once setup enable wormhole and copy the address.
Go to IFTTT
Connect web request to your account and edit the url to <your_dataplicity_server>/incoming1 (incoming1 can be replaced with anything)
Run node-red by typing node-red
Import the node-js code to node-red. This can be done by using the import tab in menu. Select import via clipboard and paste the code\

Library can be imported directly now.

Deploy the code.Change the gpio pins according to the wiring done Edit the incoming https request to /incoming1(or whatever you used in IFTTT).

For UI control:

You will have to install the dashboard node for this functionality. More details are here.It can be accesed on the pi's ip/ui

Node-red is now connected to IFTTT service

Usage example:

Using Google assistant to toggle a relay:
Connect Google Assistant to your account in IFTTT.
Verify your device and create an applet
In the 'IF this' part setup the command for the Assistant. In 'Then that' part use web request and set it ip up using the steps given above.

Testing

Say the command set up on Google Assistant and it will trigger a web request to the dataplicity link.The pi is waiting for the webrequest at a specific sublink setup up. To use more triggers simply change the web request to /incoming2 etc.