Skip to content

Latest commit

 

History

History
479 lines (348 loc) · 18.2 KB

DEVELOPER.md

File metadata and controls

479 lines (348 loc) · 18.2 KB
Raw

Development

We encourage community contributions to Kong. To make sure it is a smooth experience (both for you and for the Kong team), please read CONTRIBUTING.md, CODE_OF_CONDUCT.md, and COPYRIGHT before you start.

If you are planning on developing on Kong, you'll need a development installation. The master branch holds the latest unreleased source code.

You can read more about writing your own plugins in the Plugin Development Guide, or browse an online version of Kong's source code documentation in the Plugin Development Kit (PDK) Reference.

For a quick start with custom plugin development, check out Pongo and the plugin template explained in detail below.

Distributions

Kong comes in many shapes. While this repository contains its core's source code, other repos are also under active development:

You can find every supported distribution on the official installation page.

Docker

You can use Docker / docker-compose and a mounted volume to develop Kong by following the instructions on Kong/kong-build-tools.

Kong Gojira

Gojira is a CLI that uses docker-compose internally to make the necessary setup of containers to get all dependencies needed to run a particular branch of Kong locally, as well as easily switching across versions, configurations and dependencies. It has support for running Kong in Hybrid (CP/DP) mode, testing migrations, running a Kong cluster, among other features.

Kong Pongo

Pongo is another CLI like Gojira, but specific for plugin development. It is docker-compose based and will create local test environments including all dependencies. Core features are running tests, integrated linter, config initialization, CI support, and custom dependencies.

Kong Plugin Template

The plugin template provides a basic plugin and is considered a best-practices plugin repository. When writing custom plugins, we strongly suggest you start by using this repository as a starting point. It contains the proper file structures, configuration files, and CI setup to get up and running quickly. This repository seamlessly integrates with Pongo.

Vagrant

You can use a Vagrant box running Kong and Postgres that you can find at Kong/kong-vagrant.

Source Install

Kong is mostly an OpenResty application made of Lua source files, but also requires some additional third-party dependencies, some of which are compiled with tweaked options, and kong runs on a modified version of OpenResty with patches.

To install from the source, first, we clone the repository:

git clone https://github.com/Kong/kong

cd kong
# You might want to switch to the development branch. See CONTRIBUTING.md
git checkout master

Before continuing you should go through this section to set up dependencies.

Then you can install the Lua source:

# go back to where the kong source locates after dependencies are set up
cd ../../kong

sudo luarocks make

Running for development

Modifying the lua_package_path and lua_package_cpath directives will allow Kong to find your custom plugin's source code wherever it might be in your system.

Tests

Install the development dependencies ([busted], [luacheck]) with:

make dev

Kong relies on three test suites using the [busted] testing library:

  • Unit tests
  • Integration tests, which require Postgres and Cassandra to be up and running
  • Plugins tests, which require Postgres to be running

The first can simply be run after installing busted and running:

make test

However, the integration and plugins tests will spawn a Kong instance and perform their tests against it. Because these test suites perform their tests against the Kong instance, you may need to edit the spec/kong_tests.conf configuration file to make your test instance point to your Postgres/Cassandra servers, depending on your needs.

You can run the integration tests (assuming both Postgres and Cassandra are running and configured according to spec/kong_tests.conf) with:

make test-integration

And the plugins tests with:

make test-plugins

Finally, all suites can be run at once by simply using:

make test-all

Consult the run_tests.sh script for more advanced example usage of the test suites and the Makefile.

Finally, a very useful tool in Lua development (as with many other dynamic languages) is performing static linting of your code. You can use [luacheck] (installed with make dev) for this:

make lint

Makefile

When developing, you can use the Makefile for doing the following operations:

Name Description
install Install the Kong luarock globally
dev Install development dependencies
lint Lint Lua files in kong/ and spec/
test Run the unit tests suite
test-integration Run the integration tests suite
test-plugins Run the plugins test suite
test-all Run all unit + integration + plugins tests at once

These are the steps we follow at Kong to set up a development environment.

Dev on Docker

Gojira is a multi-purpose tool to ease the development and testing of Kong by using Docker containers. It's built on the top of Docker and Docker Compose, and separates multiple Kong development environments into different Docker Compose stacks. It also auto-manages the network configuration between Kong and PostgreSQL (if required) by configuring the containers' environment variables.

It's fully compatible with all platforms (even Apple Silicon). You can set up your development environment with Gojira in a couple of seconds (depending on your network speed).

See below links to install the dependencies:

Install Gojira (see full instructions):

git clone [email protected]:Kong/gojira.git
mkdir -p ~/.local/bin
ln -s $(realpath gojira/gojira.sh) ~/.local/bin/gojira

Add export PATH=$PATH:~/.local/bin to your .bashrc or .zshrc file.

Clone the Kong project to your development folder.

git clone [email protected]:Kong/kong.git
cd kong

Within the kong folder run the following Gojira commands to start a development version of the Kong Gateway using PostgreSQL:

gojira up -pp 8000:8000 -pp 8001:8001
gojira run make dev
gojira run kong migrations bootstrap
gojira run kong start

Verify the Admin API is now available by navigating to http://localhost:8001 on your host machine browser.

Tips:

  • Attach to shell by running gojira shell within kong folder.
  • Learn about usage patterns of Gojira.

Dev on Linux (Host/VM)

If you have a Linux development environment (either virtual or bare metal), the build is done in four separate steps:

  1. Development dependencies and runtime libraries, including:
    1. Prerequisite packages. Mostly compilers, tools, and libraries required to compile everything else.
    2. OpenResty system, including Nginx, LuaJIT, PCRE, etc.
  2. Databases. Kong uses Postgres, Cassandra, and Redis. We have a handy setup with docker-compose to keep each on its container.
  3. Kong itself.

Virtual Machine (Optional)

Final deployments are typically on a Linux machine or container,so even if all components are multiplatform, it's easier to use it for development too. If you use macOS or Windows machines, setting up a virtual machine is easy enough now. Most of us use the freely available VirtualBox without any trouble.

If you use Linux for your desktop, you can skip this section.

There are no "hard" requirements on any Linux distro, but RHEL and CentOS can be more of a challenge to get recent versions of many packages; Fedora, Debian, or Ubuntu are easier for this.

To avoid long compilation times, give the VM plenty of RAM (8GB recommended) and all the CPU cores you can.

Virtual Box setup

You will need to setup port forwarding on VirtualBox to be able to ssh into the box which can be done as follows:

  1. Select the virtual machine you want to use and click "Settings"
  2. Click the "Network" tab
  3. Click the "Advanced" dropdown
  4. Click "Port Forwarding"
  5. Add a new rule in the popup. The only thing you will need is "Host Port" to be 22222 and "Guest Port" to be 22. Everything else can be left default (see screenshot below)
  6. Click "Ok"

Now you should be able to ssh <your_name>@127.1 -p 22222 to get SSH prompt. However, this requires us to type a long command and password every time we sign in. It is recommended you set up a public key and SSH alias to make this process simpler:

  1. On your host machine, generate a keypair for SSH into the guest: ssh-keygen -t ed25519. Just keep hitting Enter until the key is generated. You do not need a password for this key file since it is only used for SSH into your guest
  2. Type cat .ssh/id_ed25519.pub and copy the public key
  3. SSH into the guest using the command above
  4. Create the ssh config directory (if it doesn't exist) $ mkdir -p .ssh
  5. Edit the authorized keys list: vim .ssh/authorized_keys
  6. Paste in the content of .ssh/id_ed25519.pub
  7. Adjust the required privileges: chmod 700 .ssh/ and chmod 400 .ssh/authorized_keys
  8. Logout of guest and make sure you are not promoted password when SSH again
  9. Edit the .ssh/config file on your host and put in the following content:
    Host dev
        HostName 127.1
        Port 22222
        User <your_user_name>

Now try ssh dev on your host, you should be able to get into the guest directly

Dependencies (Binary release)

For your convenience and to be more efficient, we recommended installing dependencies including OpenResty, OpenSSL, LuaRocks, and PCRE by downloading and installing Kong's latest Linux package release (.deb or .rpm).

Follow the below steps to install download and install the Kong package. And you can find all downloadable Linux packages here.

Ubuntu/Debian:

curl -Lo kong-2.7.0.amd64.deb "https://download.konghq.com/gateway-2.x-$(. /etc/os-release && echo "$ID")-$(lsb_release -cs)/pool/all/k/kong/kong_2.7.0_amd64.deb"
sudo dpkg -i kong-2.7.0.amd64.deb

CentOS:

curl -Lo kong-2.7.0.rpm $(rpm --eval "https://download.konghq.com/gateway-2.x-centos-%{centos_ver}/Packages/k/kong-2.7.0.el%{centos_ver}.amd64.rpm")
sudo yum install kong-2.7.0.rpm

Now you have met all the requirements before installing Kong.

Dependencies (Build from source)

This is the hard way to build a development environment, and also a good start for beginners to understand how everything fits together.

Prerequisites

These are the needed tools and libraries that aren't installed out of the box on Ubuntu and Fedora, respectively. Just run one of these, either as root or sudo.

Ubuntu/Debian:

apt-get update \
&& apt-get install -y \
    automake \
    build-essential \
    curl \
    docker \
    docker-compose \
    git \
    libpcre3 \
    libyaml-dev \
    m4 \
    openssl \
    perl \
    procps \
    unzip \
    zlib1g-dev

Fedora:

dnf install \
    automake \
    docker \
    docker-compose \
    gcc \
    gcc-c++ \
    git \
    libyaml-devel \
    make \
    patch \
    pcre-devel \
    unzip \
    zlib-devel

OpenResty

We have a build script from Kong/kong-ngx-build that makes it easy to pull and compile specific versions of the needed components of the OpenResty system.

To run the script we need to find out what versions of them the current build of Kong requires, and use that as arguments. Their exact versions can be found on the .requirements file.

You can manually fill in the versions, or follow the steps below.

# if you are not in the directory 
# cd kong

export RESTY_VERSION=$(grep -oP 'RESTY_VERSION=\K.*' .requirements)
export RESTY_OPENSSL_VERSION=$(grep -oP 'RESTY_OPENSSL_VERSION=\K.*' .requirements)
export RESTY_LUAROCKS_VERSION=$(grep -oP 'RESTY_LUAROCKS_VERSION=\K.*' .requirements)
export RESTY_PCRE_VERSION=$(grep -oP 'RESTY_PCRE_VERSION=\K.*' .requirements)

These commands don't have to be performed as root, since all compilation is done within a subdirectory, and installs everything in the target specified by the -p argument (here the build directory).

# Somewhere you're able or prefer to build
export BUILDROOT=$(realpath ~/kong-dep)
mkdir ${BUILDROOT} -p

# clone the repository
cd ..
git clone https://github.com/kong/kong-build-tools

cd kong-build-tools/openresty-build-tools

# You might want to add also --debug
./kong-ngx-build -p ${BUILDROOT} --openresty ${RESTY_VERSION} --openssl ${RESTY_OPENSSL_VERSION} --luarocks ${RESTY_LUAROCKS_VERSION} --pcre ${RESTY_PCRE_VERSION}

After this task, we'd like to have the next steps use the built packages and for LuaRocks to install new packages inside this build directory. For that, it's important to set the $PATH variable accordingly:

# Add those paths for later use
export OPENSSL_DIR=${BUILDROOT}/openssl
export CRYPTO_DIR=${BUILDROOT}/openssl
export PATH=${BUILDROOT}/luarocks/bin:${BUILDROOT}/openresty/bin:${PATH}
eval $(luarocks path)

The $OPENSSL_DIR variable is needed when compiling Kong, to make sure it uses the correct version of OpenSSL.

You can add these lines to your .profile or .bashrc file. Otherwise, you could find yourself wondering where is everything!.

# If you want to set it permanently
echo export OPENSSL_DIR=${BUILDROOT}/openssl >> ~/.profile
echo export PATH=${BUILDROOT}/luarocks/bin:${BUILDROOT}/openresty/bin:\${PATH} >> ~/.profile
echo eval "\$(luarocks path)" >> ~/.profile

Databases

The easiest way to handle these as a single group is via docker-compose. It's also recommended to set your user as a docker manager to simplify the next steps.

Make sure the docker daemon is enabled and running: sudo systemctl enable docker and sudo systemctl start docker. Verify that docker ps shows no errors.

On a Fedora VM, you might have to disable SELinux:

sudo vim /etc/selinux/config        # change the line to SELINUX=disabled
sudo setenforce 0

Now pull the compose script from the repository and fire it up:

git clone https://github.com/thibaultcha/kong-tests-compose.git
cd kong-tests-compose
docker-compose up

Verify the three new containers are up and running with docker ps on a separate terminal.

Install Kong

git clone https://github.com/Kong/kong.git
cd kong
git checkout master
make dev

Now run unit tests with make test and integration test with make test-integration.

Hack on!

Dev on VSCode Container / GitHub Codespaces

The devcontainer.json file in Kong's project tells VS Code how to access (or create) a development container with a well-defined tool and runtime stack.

What's next