Solax X1 mini (X1-0.6-S-D(L)) support

[syssi]

I bought a Solax X1 mini + PocketWifi module. It looks like it is not possible to disable the SoftAP mode of the stick after successful configuration. Furthermore the Solaxcloud returns "invalid user name" occasionally. Enough reasons to interface the device via RS485 (rtu). I hope the same registers of the solax_x1ac.yaml applies to my device. Anybody here using the Solax X1 mini (X1-0.6) already?

[mfcltd]

The X1 series are all very similar. I would give it a go and see if HA can read the inverter! From: Sebastian Muszynski ***@***.***> Sent: 13 May 2021 10:13 To: wills106/homeassistant-config ***@***.***> Cc: Subscribed ***@***.***> Subject: [wills106/homeassistant-config] Solax X1 mini (`X1-0.6-S-D(L)`) support (#8) I bought a Solax X1 mini + PocketWifi module. It looks like it is not possible to disable the SoftAP mode of the stick after successful configuration. Furthermore the Solaxcloud returns "invalid user name" occasionally. Enough reasons to interface the device via RS485 (rtu). I hope the same registers of the solax_x1ac.yaml applies to my device. Anybody here using the Solax X1 mini (X1-0.6) already? — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub<#8>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AETXC5FRII7WDB42YJXPO5LTNOJZ7ANCNFSM442GOANA>.

[syssi]

I will give it a try as soon the RS485-to-USB adapter arrives. I'm a bit anxious because the LCD menu doesn't have a "remote control" or "rs485" entry.

[mfcltd]

**You make changes at your own risk** For my AC-X1, for the Remote Control; In the Solax App mobile app: 1. Press the invert icon and press the cog 2. Press Advanced and enter the password 2014 3. Press “Inverter Remote Switch” 4. Change to “Enable” and press “Save” Max From: Sebastian Muszynski ***@***.***> Sent: 13 May 2021 15:43 To: wills106/homeassistant-config ***@***.***> Cc: Max Frimond ***@***.***>; Comment ***@***.***> Subject: Re: [wills106/homeassistant-config] Solax X1 mini (X1-0.6-S-D(L)) support (#8) I will give it a try as soon the RS485-to-USB adapter arrives. I'm a bit anxious because the LCD menu doesn't have a "remote control" or "rs485" entry. — You are receiving this because you commented. Reply to this email directly, view it on GitHub<#8 (reply in thread)>, or unsubscribe<https://github.com/notifications/unsubscribe-auth/AETXC5AHADP4R5QLGSR2QQDTNPQPDANCNFSM442GOANA>.

[syssi]

This doesn't apply to my device. :-( Take a look at the attached screenshot.

[wills106]

As the inverter is only providing data it may not need a "Remote Control" function as you are not writing an values back.

It might just be a case of connecting it up and then when the ModBus component in the Package requests the registers it just provides the data requested.

[syssi]

Fingers crossed. :-) Read-only would be totally fine.