Can't find modbus settings in advance not able to connect

[yourhty]

I don't get modbus value in advance setting but I have wifi should I use directly modbus or through rs485 ethernet device? Confused.

My model.

Device Name: X1-Boost-G4

Inverter Serial No.: ZA4050JB315192

Registration No.: SR5ZQYPRQU

Wifi Dongle model

Device SN: SR5ZQYPRQU

Device type: WIFI3.0

Registration no.: SR5ZQYPRQU

Associated device: ZA4050JB315192 (X1-Boost- G4)

Access time: 2024-05-28 09:18:09

Last update: 2024-10-08 18:22:58

Version information

Version number: 3.012.01

[yourhty]

@wills106 I have asked this query in various groups they all pointed to ask you.

[wills106]

If you connect the Integration to the IP address of the PocketWiFi does it give an error in the log for:
"unrecognized inverter type - serial number : ZA405..."

[yourhty]

Yes

[yourhty]

Yes

…

On Sat, 12 Oct 2024, 12:20 wills106, ***@***.***> wrote: If you connect the Integration to the IP address of the PocketWiFi does it give an error in the log for: "unrecognized inverter type - serial number : ZA405..." — Reply to this email directly, view it on GitHub <#24 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AADBBPPX5SGRP6H43CFCTV3Z3DBCXAVCNFSM6AAAAABPSX75WSVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTAOJSGEYTCNA> . You are receiving this because you authored the thread.Message ID: <wills106/homeassistant-config/repo-discussions/24/comments/10921114@ github.com>