Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

18~1300 TX enabled after using RSSI mod. #6

Open
troilus opened this issue Aug 9, 2023 · 6 comments
Open

18~1300 TX enabled after using RSSI mod. #6

troilus opened this issue Aug 9, 2023 · 6 comments

Comments

@troilus
Copy link
Contributor

troilus commented Aug 9, 2023

No description provided.

@troilus troilus changed the title 18~1300 TX enabled after using RSSI 18~1300 TX enabled after using RSSI mod. Aug 9, 2023
@whosmatt
Copy link
Owner

whosmatt commented Aug 9, 2023

I did some testing

Stock should be
F1: 50.0000-76.0000MHz (RX only)
F2: 108-.0000-135.9750MHz (RX only)
F3: 136.0000-173.9750MHz (TX and RX both)
F4: 174.0000-349.9750MHz (RX only)
F5: 350.0000-399.9750MHz (RX only)
F6: 400.0000-469.9750MHz (TX and RX both)
F7: 470.0000-600.0000MHz (RX only)

But with RSSI firmware I got
F1: 50.0000-76.0000MHz (RX only) No TX
F2: 108-.0000-135.9750MHz (RX only) No TX
F3: 136.0000-173.9750MHz (TX and RX both) TX
F4: 174.0000-349.9750MHz (RX only) TX
F5: 350.0000-399.9750MHz (RX only) TX
F6: 400.0000-469.9750MHz (TX and RX both) TX
F7: 470.0000-600.0000MHz (RX only) TX

It seems there is indeed an issue with piotr's RSSI firmware.

@Pomidor78
Copy link

Tak, trzeba wejść w menu dodatkowe i wyłączyć nadawanie w tych pasmach.
200tx

@whosmatt
Copy link
Owner

I couldnt figure out the root cause yet but I did add a warning in 824e2f5

@Pomidor78
Copy link

Pomidor78 commented Aug 18, 2023

Możesz dopisać że nadawanie można wyłączyć w dodatkowym menu (PTT + L1)

@whosmatt
Copy link
Owner

The problem is that the mod enables TX without me changing any settings.

@Pomidor78
Copy link

Tak jakby aktywowały się domyślne ustawienia tego firmware. Tak jak w nowym radio. Akurat tu nie jest to duży problem bo można to wyłączyć

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

3 participants