Skip to content

Latest commit

 

History

History
 
 

FYSETC_Spider_DIN_Mount

Folders and files

NameName
Last commit message
Last commit date

parent directory

..
 
 
 
 
 
 
 
 

FYSETC Spider DIN Rail Mount

for horizontal or vertical mounting

FYSETC_Spider_DIN_Mount

Required materials:

for horizontal mounting:

for vertical mounting:

for both types:

Assembly:

Put the four screws through the Spider Board mounting holes and screw it into the spacers. The spacers are intentionally tight so that you don't have to fiddle the spacers between the board an the DIN Mount.

FYSETC_Spider_DIN_Mount

FYSETC_Spider_DIN_Mount

Then screw the board on evenly on the mounts.

FYSETC_Spider_DIN_Mount

FYSETC_Spider_DIN_Mount

Note: The mounting holes on the Spider board are very tight for M3 Screws. I drilled the holes out with a 3.2mm drill bit, but don't encourage anyone to do so, because - reasons.

Disclaimer: It is your printer. If you do this and something breaks or if someone gets hurt, it is fully your responsibility. I take no responsibility.

In case of doubt ping me on Discord hoschi#0238