Name		Name	Last commit message	Last commit date
parent directory ..
Images		Images
README.md		README.md
display5inch_arm_a.stl		display5inch_arm_a.stl
display5inch_arm_b.stl		display5inch_arm_b.stl
display5inch_case.stl		display5inch_case.stl
display5inch_case_moretolerance.stl		display5inch_case_moretolerance.stl
display5inch_front_rear_skirt_a_250.stl		display5inch_front_rear_skirt_a_250.stl
display5inch_front_rear_skirt_a_300.stl		display5inch_front_rear_skirt_a_300.stl
display5inch_front_rear_skirt_a_350.stl		display5inch_front_rear_skirt_a_350.stl
display5inch_front_rear_skirt_b_250.stl		display5inch_front_rear_skirt_b_250.stl
display5inch_front_rear_skirt_b_300.stl		display5inch_front_rear_skirt_b_300.stl
display5inch_front_rear_skirt_b_350.stl		display5inch_front_rear_skirt_b_350.stl
display5inch_optional_microsd_holder.stl		display5inch_optional_microsd_holder.stl
display5inch_optional_sd_holder.stl		display5inch_optional_sd_holder.stl
display5inch_slide_x2.stl		display5inch_slide_x2.stl

README.md

Voron 2.4 5" display tilting support

Many thanks to Jo_Thingiverse for having tested this mount.

Bill Of Materials

Screen 5" 800*480 IPS TFT MIPI DSI Multi-Touch Capacitive Touch Panel LCD Module Display Monitor Screen for Raspberry Pi
optional SD extender or microSD extender
2 M3x15
6(+4) M3x8
6 M3 threaded inserts
2 M3 hammered nuts

Instructions

Put one M3 threaded insert in each arm end.
Put four M3 threaded insert in the back of the screen case.
Remove the built-in support in the fork of both arms.
Install the two slides with M3x8.
Use two pieces of filament as hinges.
Adjust the tension of the screws that pass through the slides to keep the position.
The optional installation of the SD extender requires four self tapping M3x8.

Since the screen is larger than the original piece you will have to replace your sides skirts. These are included too.