From 47da489783a80f64f539f362139ec4390c4f33c8 Mon Sep 17 00:00:00 2001 From: avi951 Date: Sat, 7 Dec 2024 16:57:18 +0530 Subject: [PATCH] axon-downloads: Add Axon Enclosure Installation Guide. Signed-off-by: avi951 --- source/vicharak_sbcs/axon/axon-downloads.rst | 28 ++++++++++++++++++++ 1 file changed, 28 insertions(+) diff --git a/source/vicharak_sbcs/axon/axon-downloads.rst b/source/vicharak_sbcs/axon/axon-downloads.rst index 80bb7e1..140230c 100644 --- a/source/vicharak_sbcs/axon/axon-downloads.rst +++ b/source/vicharak_sbcs/axon/axon-downloads.rst @@ -101,6 +101,34 @@ Step File **Axon 3D Printed Case Files** +- Axon Enclosure Installation Guide + +.. note:: + + The Axon enclosure combines a snap-fit design with screws for added stability, allowing secure and easy access to the board's components. + +- Installation Steps + +1. Insert the Board + - Slide the board into the bottom part of the enclosure. + +2. Fasten with Screws + - Use self-tapping screws with the following specifications: + - **Thread Diameter:** 2.7 mm + - **Height:** 12 mm + - Secure the screws gently to avoid overtightening, which can damage the board. + +3. Snap-Fit the Top Cover + - Slide and lock the top on the **right side**. + - Push down on the **left side** until it snaps into place. + +- Opening the Enclosure + +1. Locate the area labeled **"Press Here"** on the lid. +2. Hold and press the lid at the labeled spot. +3. Pull up gently to release the snap-fit and open the enclosure. + + `Download File `_ .. note::