Installing from sctracth micropython-ulab to Raspberry Pi Pico

[muhammedAzadKilicarslan]

Hello bro,

First of all, congratulations for this usefull project. I want to confess something to you, I could not install this library to my pico and I know that there are some people in same situation as me. There is a offer for us. Can you explain how to install this library to pico from sctracth? If you explain detailed step by step, I can make a video on Youtube and metion about your profile and your project. Finally, your project also will be spread.

What do you think?

[v923z]

Thanks for your comments!

Is the section https://github.com/v923z/micropython-ulab#rp2-based-boards not detailed enough? Also, if you don't want to deal with the installation and compilation, you can download the latest firmware from https://github.com/v923z/micropython-builder/releases. If your particular hardware is not listed there, I would be more than happy to add that to the workflow file.

[muhammedAzadKilicarslan]

I did all of things in this link "https://github.com/v923z/micropython-ulab#rp2-based-boards" but I do not know what is the next step. If you help me, I can make a video for dumbies as me :| .

[v923z]

Ah, I see. So, at the end of those steps, you should have the firmware in the build directory somewhere in ./micropython/ports/rp2/. You take that firmware, and upload it to the microcontroller. You could look at https://www.youtube.com/watch?v=_JxfOmTY8I4, e.g.

[muhammedAzadKilicarslan]

Thank you so much bro. I am really appreciate it.

[muhammedAzadKilicarslan]

I tried my best. Regards. https://www.youtube.com/watch?v=LngkFzQla-k&ab_channel=MuhammedAzadK%C4%B1l%C4%B1%C3%A7arslan

[v923z]

Thanks for sharing the video!