Skip to content

Latest commit

 

History

History
131 lines (102 loc) · 6.78 KB

README.md

File metadata and controls

131 lines (102 loc) · 6.78 KB
Raw

Tx_CMSIS_Wrapper application description

This application provides an example of CMSIS RTOS adaptation layer for Azure RTOS ThreadX, it shows how to develop an application using the CMSIS RTOS 2 APIs. It demonstrates how to create multiple threads using CMSIS RTOS 2 for ThreadX APIs. At the main function, the application creates 2 threads with the same priority which execute in a periodic cycle of 15 seconds :

  • 'ThreadOne' (Priority : osPriorityNormal)
  • 'ThreadTwo' (Priority : osPriorityNormal)

The function "Led_Toggle()" is the entry function for both threads to toggle the leds.Therefore it is considered as a "critical section" that needs protection with a 'SyncObject' flag in the file "app_tx_cmsisrtos.h" Each thread is running in an infinite loop as following:

  • 'ThreadOne':

    • try to acquire the 'SyncObject' immediately.
    • On Success toggle the 'LED_GREEN' each 500ms for 5 seconds.
    • Release the 'SyncObject'
    • Sleep for 10ms.
    • repeat the steps above

  • 'ThreadTwo':

    • try to acquire the 'SyncObject' immediately.
    • On Success toggle the 'LED_RED' each 500ms for 5 seconds.
    • Release the 'SyncObject'
    • Sleep for 10ms.
    • Repeat the steps above.

By default the 'SyncObject' is defined as "osMutexId_t" .It is possible to use a semaphore "osSemaphoreId_t" by tuning the compile flags in the file "app_tx_cmsisrtos.h".

Expected success behavior

  • 'LED_GREEN' toggles every 500ms for 5 seconds
  • 'LED_RED' toggles every 500ms for 5 seconds
  • Messages on HyperTerminal :
    • "** ThreadXXX : waiting for SyncObject !! **" : When thread is waiting for the SyncObject.
    • "** ThreadXXX : waiting SyncObject released **" : When thread put the SyncObject.
    • "** ThreadXXX : waiting SyncObject acquired **" : When thread get the SyncObject.

Error behaviors

'LED_RED' toggles every 1 second if any error occurs.

Assumptions if any

None

Known limitations

None

Notes

  1. Some code parts can be executed in the ITCM-RAM (64 KB up to 256kB) which decreases critical task execution time, compared to code execution from Flash memory. This feature can be activated using '#pragma location = ".itcmram"' to be placed above function declaration, or using the toolchain GUI (file options) to execute a whole source file in the ITCM-RAM.
  2. If the application is using the DTCM/ITCM memories (@0x20000000/ 0x0000000: not cacheable and only accessible by the Cortex M7 and the MDMA), no need for cache maintenance when the Cortex M7 and the MDMA access these RAMs. If the application needs to use DMA (or other masters) based access or requires more RAM, then the user has to:
    • Use a non TCM SRAM. (example : D1 AXI-SRAM @ 0x24000000).
    • Add a cache maintenance mechanism to ensure the cache coherence between CPU and other masters (DMAs,DMA2D,LTDC,MDMA).
    • The addresses and the size of cacheable buffers (shared between CPU and other masters) must be properly defined to be aligned to L1-CACHE line size (32 bytes).
  3. It is recommended to enable the cache and maintain its coherence:
    • Depending on the use case it is also possible to configure the cache attributes using the MPU.
    • Please refer to the AN4838 "Managing memory protection unit (MPU) in STM32 MCUs".
    • Please refer to the AN4839 "Level 1 cache on STM32F7 Series"

ThreadX usage hints

  • ThreadX uses the Systick as time base, thus it is mandatory that the HAL uses a separate time base through the TIM IPs.

  • ThreadX is configured with 100 ticks/sec by default, this should be taken into account when using delays or timeouts at application. It is always possible to reconfigure it in the "tx_user.h", the "TX_TIMER_TICKS_PER_SECOND" define,but this should be reflected in "tx_initialize_low_level.s" file too.

  • ThreadX is disabling all interrupts during kernel start-up to avoid any unexpected behavior, therefore all system related calls (HAL, BSP) should be done either at the beginning of the application or inside the thread entry functions.

  • ThreadX offers the "tx_application_define()" function, that is automatically called by the tx_kernel_enter() API. It is highly recommended to use it to create all applications ThreadX related resources (threads, semaphores, memory pools...) but it should not in any way contain a system API call (HAL or BSP).

  • Using dynamic memory allocation requires to apply some changes to the linker file. ThreadX needs to pass a pointer to the first free memory location in RAM to the tx_application_define() function, using the "first_unused_memory" argument. This require changes in the linker files to expose this memory location.

    • For EWARM add the following section into the .icf file:
    place in RAM_region    { last section FREE_MEM };
    • For MDK-ARM:
    either define the RW_IRAM1 region in the ".sct" file
or modify the line below in "tx_low_level_initilize.s to match the memory region being used
    LDR r1, =|Image$$RW_IRAM1$$ZI$$Limit|
    • For STM32CubeIDE add the following section into the .ld file:
    ._threadx_heap :
  {
     . = ALIGN(8);
     __RAM_segment_used_end__ = .;
     . = . + 64K;
     . = ALIGN(8);
   } >RAM_D1 AT> RAM_D1

    The simplest way to provide memory for ThreadX is to define a new section, see ._threadx_heap above.
In the example above the ThreadX heap size is set to 64KBytes.
The ._threadx_heap must be located between the .bss and the ._user_heap_stack sections in the linker script.	 
Caution: Make sure that ThreadX does not need more than the provided heap memory (64KBytes in this example).	 
Read more in STM32CubeIDE User Guide, chapter: "Linker script".
    • The "tx_initialize_low_level.s" should be also modified to enable the "USE_DYNAMIC_MEMORY_ALLOCATION" flag.

Keywords

RTOS, ThreadX, Thread, CMSIS RTOS, Semaphore, Mutex

Hardware and Software environment

  • This example runs on STM32H747xx devices
  • This example has been tested with STMicroelectronics STM32H747I-DISCO boards Revision and can be easily tailored to any other supported device and development board.
  • A virtual COM port appears in the HyperTerminal:
    • Hyperterminal configuration:
      • Data Length = 8 Bits
      • One Stop Bit
      • No parity
      • BaudRate = 115200 baud
      • Flow control: None

How to use it ?

In order to make the program work, you must do the following :

  • Open your preferred toolchain
  • For each target configuration (Tx_CMSIS_Wrapper_CM7 and Tx_CMSIS_Wrapper_CM4) :
    • Rebuild all files
    • Load images into target memory
  • After loading the two images, you have to reset the board in order to boot (Cortex-M7) and CPU2 (Cortex-M4) at once.
  • Run the application