Program to decode radio transmissions from devices on the ISM bands (and other frequencies)

A controller for Somfy RTS shades and blinds

My Old Home Assistant Config. For more Information visit ->

433MHz temperature and humidity sensor receiver that integrates with home automation systems.

Control 433Mhz Rf power outlets from a Raspberry Pi

MQTT 433.92 MHz radio-frequency device gateway

Open the Tesla charge door with an Arduino and an ASK STX882 transmitter

Very simple 433MHz (EU/ASIA) 315 MHz (US) RF jammer for keyless cars theft prevention

ESPiLight - pilight 433.92 MHz protocols library for Arduino

Arduino Uno, 433MhzRx and OS WMR86 Weather Station

Time-based cover with customizable scripts or entity to trigger opening, stopping and closing. Position is calculated based on the fraction of time spent by the cover traveling up or down. State can be updated with information based on external sensors.

RFLink for ESP, with MQTT client

A small Arduino library for using 315MHz / 433MHz RF modules with ATtiny13 and other low-memory microcontrollers.

Decode tire pressure monitoring system TPMS BLE 433MHz CC1101 ESP8266 ESP32

Automate gate/garage door opening via 433.92MHz emitter with Raspberry Pi, Home Assistant and Homekit.

nodejs modul with protocol support for different 433mhz switches and weather stations for the RFControl Arduino library.

this is example of cloning my garage keys with Arduino Digispark and FS1000A transmitter. The keys sequences were recorded first using Universal Radio Hacker tool

Just hack any 433MHz device!

Arduino library for TI CC1101. Supports the latest Arduino IDE and Platformio. Tested with AVR atmega328, stm32f103, nodeMCU and probably works with a lot more.

RF (433Mhz) to MQTT Bridge - with hardware