Same chipset as the TOP-GS07
Seems to run cooler then the TOP-GS07
ULF antenna connectors for BOTH antennas
On board Antennas can be enabled by soldering 0ohm resistor
Meant for embedded applications - (USB in header format not USB connector)
More Info: DataSheet
Wiphy phy2
max # scan SSIDs: 4
max scan IEs length: 2257 bytes
Retry short long limit: 2
Coverage class: 0 (up to 0m)
Device supports RSN-IBSS.
Supported Ciphers:
* WEP40 (00-0f-ac:1)
* WEP104 (00-0f-ac:5)
* TKIP (00-0f-ac:2)
* CCMP (00-0f-ac:4)
* 00-0f-ac:10
* GCMP (00-0f-ac:8)
* 00-0f-ac:9
Available Antennas: TX 0 RX 0
Supported interface modes:
* IBSS
* managed
* AP
* AP/VLAN
* WDS
* monitor
* mesh point
Band 1:
Capabilities: 0x2fe
HT20/HT40
SM Power Save disabled
RX Greenfield
RX HT20 SGI
RX HT40 SGI
TX STBC
RX STBC 2-streams
Max AMSDU length: 3839 bytes
No DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 2 usec (0x04)
HT TX/RX MCS rate indexes supported: 0-15, 32
Bitrates (non-HT):
* 1.0 Mbps
* 2.0 Mbps (short preamble supported)
* 5.5 Mbps (short preamble supported)
* 11.0 Mbps (short preamble supported)
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
Frequencies:
* 2412 MHz [1] (30.0 dBm)
* 2417 MHz [2] (30.0 dBm)
* 2422 MHz [3] (30.0 dBm)
* 2427 MHz [4] (30.0 dBm)
* 2432 MHz [5] (30.0 dBm)
* 2437 MHz [6] (30.0 dBm)
* 2442 MHz [7] (30.0 dBm)
* 2447 MHz [8] (30.0 dBm)
* 2452 MHz [9] (30.0 dBm)
* 2457 MHz [10] (30.0 dBm)
* 2462 MHz [11] (30.0 dBm)
* 2467 MHz [12] (disabled)
* 2472 MHz [13] (disabled)
* 2484 MHz [14] (disabled)
Band 2:
Capabilities: 0x2fe
HT20/HT40
SM Power Save disabled
RX Greenfield
RX HT20 SGI
RX HT40 SGI
TX STBC
RX STBC 2-streams
Max AMSDU length: 3839 bytes
No DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 2 usec (0x04)
HT TX/RX MCS rate indexes supported: 0-15, 32
Bitrates (non-HT):
* 6.0 Mbps
* 9.0 Mbps
* 12.0 Mbps
* 18.0 Mbps
* 24.0 Mbps
* 36.0 Mbps
* 48.0 Mbps
* 54.0 Mbps
Frequencies:
* 5180 MHz [36] (17.0 dBm)
* 5190 MHz [38] (17.0 dBm)
* 5200 MHz [40] (17.0 dBm)
* 5210 MHz [42] (17.0 dBm)
* 5220 MHz [44] (17.0 dBm)
* 5230 MHz [46] (17.0 dBm)
* 5240 MHz [48] (17.0 dBm)
* 5250 MHz [50] (disabled)
* 5260 MHz [52] (23.0 dBm) (radar detection)
DFS state: usable (for 107888 sec)
DFS CAC time: 60000 ms
* 5270 MHz [54] (23.0 dBm) (radar detection)
DFS state: usable (for 107888 sec)
DFS CAC time: 60000 ms
* 5280 MHz [56] (23.0 dBm) (radar detection)
DFS state: usable (for 107888 sec)
DFS CAC time: 60000 ms
* 5290 MHz [58] (23.0 dBm) (radar detection)
DFS state: usable (for 107888 sec)
DFS CAC time: 60000 ms
* 5300 MHz [60] (23.0 dBm) (radar detection)
DFS state: usable (for 107888 sec)
DFS CAC time: 60000 ms
* 5310 MHz [62] (23.0 dBm) (radar detection)
DFS state: usable (for 107888 sec)
DFS CAC time: 60000 ms
* 5320 MHz [64] (23.0 dBm) (radar detection)
DFS state: usable (for 107888 sec)
DFS CAC time: 60000 ms
* 5500 MHz [100] (23.0 dBm) (radar detection)
DFS state: usable (for 107888 sec)
DFS CAC time: 60000 ms
* 5510 MHz [102] (23.0 dBm) (radar detection)
DFS state: usable (for 107888 sec)
DFS CAC time: 60000 ms
* 5520 MHz [104] (23.0 dBm) (radar detection)
DFS state: usable (for 107888 sec)
DFS CAC time: 60000 ms
* 5530 MHz [106] (23.0 dBm) (radar detection)
DFS state: usable (for 107888 sec)
DFS CAC time: 60000 ms
* 5540 MHz [108] (23.0 dBm) (radar detection)
DFS state: usable (for 107888 sec)
DFS CAC time: 60000 ms
* 5550 MHz [110] (23.0 dBm) (radar detection)
DFS state: usable (for 107888 sec)
DFS CAC time: 60000 ms
* 5560 MHz [112] (23.0 dBm) (radar detection)
DFS state: usable (for 107888 sec)
DFS CAC time: 60000 ms
* 5570 MHz [114] (23.0 dBm) (radar detection)
DFS state: usable (for 107888 sec)
DFS CAC time: 60000 ms
* 5580 MHz [116] (23.0 dBm) (radar detection)
DFS state: usable (for 107888 sec)
DFS CAC time: 60000 ms
* 5590 MHz [118] (23.0 dBm) (radar detection)
DFS state: usable (for 107888 sec)
DFS CAC time: 60000 ms
* 5600 MHz [120] (disabled)
* 5610 MHz [122] (disabled)
* 5620 MHz [124] (disabled)
* 5630 MHz [126] (disabled)
* 5640 MHz [128] (disabled)
* 5650 MHz [130] (disabled)
* 5660 MHz [132] (23.0 dBm) (radar detection)
DFS state: usable (for 107888 sec)
DFS CAC time: 60000 ms
* 5670 MHz [134] (23.0 dBm) (radar detection)
DFS state: usable (for 107888 sec)
DFS CAC time: 60000 ms
* 5680 MHz [136] (23.0 dBm) (radar detection)
DFS state: usable (for 107888 sec)
DFS CAC time: 60000 ms
* 5690 MHz [138] (23.0 dBm) (radar detection)
DFS state: usable (for 107888 sec)
DFS CAC time: 60000 ms
* 5700 MHz [140] (23.0 dBm) (radar detection)
DFS state: usable (for 107888 sec)
DFS CAC time: 60000 ms
* 5745 MHz [149] (30.0 dBm)
* 5755 MHz [151] (30.0 dBm)
* 5765 MHz [153] (30.0 dBm)
* 5775 MHz [155] (30.0 dBm)
* 5785 MHz [157] (30.0 dBm)
* 5795 MHz [159] (30.0 dBm)
* 5805 MHz [161] (30.0 dBm)
* 5825 MHz [165] (30.0 dBm)
* 4920 MHz [184] (disabled)
* 4940 MHz [188] (disabled)
* 4960 MHz [192] (disabled)
* 4980 MHz [196] (disabled)
Supported commands:
* new_interface
* set_interface
* new_key
* start_ap
* new_station
* new_mpath
* set_mesh_config
* set_bss
* authenticate
* associate
* deauthenticate
* disassociate
* join_ibss
* join_mesh
* set_tx_bitrate_mask
* frame
* frame_wait_cancel
* set_wiphy_netns
* set_channel
* set_wds_peer
* probe_client
* set_noack_map
* register_beacons
* start_p2p_device
* set_mcast_rate
* connect
* disconnect
* Unknown command (104)
* Unknown command (121)
Supported TX frame types:
* IBSS: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* managed: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* AP: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* AP/VLAN: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* mesh point: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-client: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-GO: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
* P2P-device: 0x00 0x10 0x20 0x30 0x40 0x50 0x60 0x70 0x80 0x90 0xa0 0xb0 0xc0 0xd0 0xe0 0xf0
Supported RX frame types:
* IBSS: 0x40 0xb0 0xc0 0xd0
* managed: 0x40 0xd0
* AP: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* AP/VLAN: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* mesh point: 0xb0 0xc0 0xd0
* P2P-client: 0x40 0xd0
* P2P-GO: 0x00 0x20 0x40 0xa0 0xb0 0xc0 0xd0
* P2P-device: 0x40 0xd0
software interface modes (can always be added):
* AP/VLAN
* monitor
valid interface combinations:
* #{ AP, mesh point } <= 8,
total <= 8, #channels <= 1
HT Capability overrides:
* MCS: ff ff ff ff ff ff ff ff ff ff
* maximum A-MSDU length
* supported channel width
* short GI for 40 MHz
* max A-MPDU length exponent
* min MPDU start spacing
Device supports TX status socket option.
Device supports HT-IBSS.
Device supports SAE with AUTHENTICATE command
Device supports low priority scan.
Device supports scan flush.
Device supports AP scan.
Device supports per-vif TX power setting
Driver supports full state transitions for AP/GO clients
Driver supports a userspace MPM