How to Enable Security

Table of Contents Security Features Implemented in EDK II Signed Firmware Updates Enabling UEFI Secure Boot Download PDF with examples How to add Secure Boot to DSC and FDF Enable User Identification Enabling Trusted Compute Module (TPM) Additional Notes

Security Features Implemented in EDK II

EDK II implements a variety of platform security features. These are typically disabled or absent in open hardware platforms. While some platforms implement these with enable/disable build flags, other platforms require additional porting to enable security features.

Signed Firmware Updates

Enabling UEFI Secure Boot

Download PDF with examples

How to Sign UEFI Drivers & Applications .pdf NOTE SVNs: For Nt32Pkg requires -r13186, For OVMF Requires -r13160 beyond UDK2010 version

How to add Secure Boot to DSC and FDF

Note: Information for this section was written based on the UDK2010 release

Based on original variable driver in MdeModulePkg, variable driver in SecurityPkg provides authenticated variable service in UEFI 2.3.1 spec. Runtime crypto library, OpenSSL* library and variable driver are required to enable this feature.

1. Ensure OpensslLib* library instance is defined in [LibraryClasses] section of the platform DSC file:

• IntrinsicLib|CryptoPkg/Library/IntrinsicLib/IntrinsicLib.inf
• OpensslLib|CryptoPkg/Library/OpensslLib/OpensslLib.inf

2. Ensure BaseCryptLib library instances are defined in the platform DSC file:

• For PEI driver: BaseCryptLib|CryptoPkg/Library/BaseCryptLib/PeiCryptLib.inf
• For DXE driver: BaseCryptLib|CryptoPkg/Library/BaseCryptLib/BaseCryptLib.inf
• For RUNTIME driver: BaseCryptLib|CryptoPkg/Library/BaseCryptLib/RuntimeCryptLib.inf
• For SMM driver: BaseCryptLib|CryptoPkg/Library/BaseCryptLib/SmmCryptLib.inf

3. Ensure platform secure library is added in platform DSC. A NULL instance for PlatformSecureLib is provided as below. It can be replaced by a platform-specific library instance.

• SecurityPkg/Library/PlatformSecureLibNull/PlatformSecureLibNull.inf

4. Ensure library instance DxeImageVerificationLib is added to LibraryClasses section of module SecurityStubDxe in the platform DSC file:

    MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf {
       <LibraryClasses>
          NULL|SecurityPkg/Library/DxeImageVerificationLib/DxeImageVerificationLib.inf
    }

5. Add Authenticated Variable driver INF to [Component] section of the platform DSC file:

• SecurityPkg/VariableAuthenticated/Pei/VariablePei.inf
• SecurityPkg/VariableAuthenticated/RuntimeDxe/VariableRuntimeDxe.inf
• SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf

6. Remove original variable driver INF from the platform FDF file:

• INF MdeModulePkg/Universal/Variable/Pei/VariablePei.inf
• INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf

Add Authenticated Variable Driver INF to the platform FDF file:

• INF SecurityPkg/VariableAuthenticated/Pei/VariablePei.inf
• INF SecurityPkg/VariableAuthenticated/RuntimeDxe/VariableRuntimeDxe.inf
• INF SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf

7. Update Variable GUID value of VARIABLE_STORE_HEADER in FDF file as:

    #Signature: gEfiAuthenticatedVariableGuid =
    # {0xaaf32c78, 0x947b, 0x439a, { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92}}
    0x78, 0x2c, 0xf3, 0xaa, 0x7b, 0x94, 0x9a, 0x43,
    0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92,

8. Set appropriate value of gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize for security feature relative databases which uses EFI Variable as storage. Each database stores in a single variable, the maximum variable size is defined by PCD value of gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize.

Database categories include:

• 1) PK database: only one entry for public key of PK plus header info.
• 2) KEK database: multi-entry for public key of KEK plus header info.
• 3) Authorized signature database: multi-entries for authorized signatures

and one entry for root X509 certificate, plus header info.

• 4) Forbidden signature database: multi-entries for forbidden signatures,

plus header info.

NOTICE: Typically the size of one X509 certificate is ~2k, which may exceed the default maximum variable size. Please adjust the value by PCD if needed.

9. Set a platform policy of image verification by PCDs. User can customize platform policy of image verification by PCD value before build a platform. In [PcdsFixedAtBuild] section of SecurityPkg.dec file, set the PCD value for each type of device accordingly.

For example, if the platform policy is defined as:

• 1) Trust all images from OptionROM.
• 2) Validate all images from removable devices and deny execute when security

violation occurs.

• 3) Validate all images from hard disk and query user to make decision when

security violation occurs.

In this case, the PCD value should be set as following:

• gEfiSecurityPkgTokenSpaceGuid.PcdOptionRomImageVerificationPolicy|0x00|UINT32|0x00000001
• gEfiSecurityPkgTokenSpaceGuid.PcdRemovableMediaImageVerificationPolicy|0x04|UINT32|0x00000002
• gEfiSecurityPkgTokenSpaceGuid.PcdFixedMediaImageVerificationPolicy|0x05|UINT32|0x00000003

10. Another authenticated variable service, named SMM authenticated variable, is also provided in SecurityPkg. SMM authenticated variable driver requires SMM FVB protocol which should be provided by platform driver and SMM FTW protocol which is already provided in MdeModulePkg. To enable SMM authenticated variable driver instead of non-SMM authenticated variable driver in SecurityPkg,

• SecurityPkg/VariableAuthenticated/RuntimeDxe/VariableRuntimeDxe.inf

should be replaced by following drivers in step 5 and 6:

• SecurityPkg/VariableAuthenticated/RuntimeDxe/VariableSmm.inf
• SecurityPkg/VariableAuthenticated/RuntimeDxe/VariableSmmRuntimeDxe.inf

Enable User Identification

Note: Information for this section was written based on the UDK2010 release

In UID (User Identification) infrastructure, there are 4 UEFI drivers, one library instance and some platform specific changes in BDS. To enable UID feature:

1. Ensure the platform specific code had been integrated into the platform BDS. Identify () in User Manager Protocol should be invoked after console is ready and authentication device (e.g. Smart card) is connected.

2. Ensure OpensslLib* library instance is defined in [LibraryClasses] section of the platform DSC file:

• IntrinsicLib|CryptoPkg/Library/IntrinsicLib/IntrinsicLib.inf
• OpensslLib|CryptoPkg/Library/OpensslLib/OpensslLib.inf

3. Ensure BaseCryptLib library instances in each phase are defined in the platform DSC file:

• PEI phase: BaseCryptLib|CryptoPkg/Library/BaseCryptLib/PeiCryptLib.inf
• DXE phase: BaseCryptLib|CryptoPkg/Library/BaseCryptLib/BaseCryptLib.inf
• RUNTIME phase: BaseCryptLib|CryptoPkg/Library/BaseCryptLib/RuntimeCryptLib.inf

4. Add UID drivers to [Component] section of the platform DSC file:

• 1) UserIdentifyManagerDxe driver produces user manager protocol and loads

deferred image after user authentication.

• SecurityPkg/UserIdentification/UserIdentifyManagerDxe/UserIdentifyManagerDxe.inf
• 2) PwdCredentialProviderDxe driver produces user credential protocol and

provides support for password credential.

• SecurityPkg/UserIdentification/PwdCredentialProviderDxe/PwdCredentialProviderDxe.inf
• 3) UsbCredentialProviderDxe driver produces user credential protocol and

provides support for secure card credential.

• SecurityPkg/UserIdentification/UsbCredentialProviderDxe/UsbCredentialProviderDxe.inf
• 4) UserProfileManagerDxe driver provide UI configure for user profiles in

UEFI HII Form Browser. It is an sample driver to configure basic user information. For advanced configuration, such as forbidding a user to load image from USB disk, it is not supported by this driver.

• SecurityPkg/UserIdentification/UserProfileManagerDxe/UserProfileManagerDxe.inf

5. Add library instance DxeDeferImageLoadLib to LibraryClasses section of module SecurityStubDxe in the platform DSC file. The library instance is invoked during loading an image into memory. The image loading could be deferred by the predefined policy in a PCD before user authentication, or be verified by current user access policy after user authentication.

    MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf {
       <LibraryClasses>
         NULL|SecurityPkg/Library/DxeDeferImageLoadLib/DxeDeferImageLoadLib.inf
    }

6. Add UID drivers to the platform FDF file:

• INF SecurityPkg/UserIdentification/UserIdentifyManagerDxe/UserIdentifyManagerDxe.inf
• INF SecurityPkg/UserIdentification/UserProfileManagerDxe/UserProfileManagerDxe.inf
• INF SecurityPkg/UserIdentification/PwdCredentialProviderDxe/PwdCredentialProviderDxe.inf
• INF SecurityPkg/UserIdentification/UsbCredentialProviderDxe/UsbCredentialProviderDxe.inf

7. Set the platform policy by PCDs.

User can customize platform policy by changing the default PCD value in SecurityPkg.dec before building a platform.

• 1) Deferred image load policy

The policy makes use of bitmasks for five predefined device types. If a bit is set, the image from the corresponding device will be trusted when loading. Image from any device is trusted by default.

• 2) USB token file name

USB credential provider will read a file as the credential information. The token file should be at the root directory of USB storage disk and its name is specified by PCD value. "Token.bin" is the default name of token file.

Enabling Trusted Compute Module (TPM)

Note: Information for this section was written based on the UDK2010 release

TCG measured boot consists of two PEI modules, four DXE drivers and three libraries and some platform specific changes. To enable TCG TPM feature:

1. Ensure the platform specific changes had been done.

• 1) Memory should be cleared if ClearMemory bit of variable MemoryOverwriteRequestControl

is set when doing memory initialization.

• 2) TcgPhysicalPresenceLibProcessRequest () from TCG physical presenceLib library

should be invoked to process pending TPM request in BDS when console is ready.

2. Ensure OpensslLib* library instance is defined in [LibraryClasses] section of the platform DSC file:

• IntrinsicLib|CryptoPkg/Library/IntrinsicLib/IntrinsicLib.inf
• OpensslLib|CryptoPkg/Library/OpensslLib/OpensslLib.inf

3. Ensure BaseCryptLib library instances in each phase are defined in the platfrom

DSC file:

• PEI phase: BaseCryptLib|CryptoPkg/Library/BaseCryptLib/PeiCryptLib.inf
• DXE phase: BaseCryptLib|CryptoPkg/Library/BaseCryptLib/BaseCryptLib.inf

4. Add library instance in the platform DSC file.

• 1) TPM common library

It provides some common function routines used by TCG drivers.

• SecurityPkg/Library/TpmCommLib/TpmCommLib.inf
• 2) TCG physical presence library

This library requires output device to display TPM state change request and input device to get user confirmation. Often it is invoked by BDS driver when console is ready.

• SecurityPkg/Library/DxeTcgPhysicalPresenceLib/DxeTcgPhysicalPresenceLib.inf
• 3) TPM measure boot library

The library instance provides measurement and log service for TPM measured boot. The instance is invoked during loading an image into memory. It should be added into LibraryClasses section of module SecurityStubDxe in the platform DSC file.

• SecurityPkg/Library/DxeTpmMeasureBootLib/DxeTpmMeasureBootLib.inf

        MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf {
          <LibraryClasses>
            NULL|SecurityPkg/Library/DxeTpmMeasureBootLib/DxeTpmMeasureBootLib.inf
        }

5. Add TPM drivers to [Component] section of the platform DSC file:

• 1) TCG TPM PEI driver initializes TPM device and measures the drivers in firmware.
• SecurityPkg/Tcg/TcgPei/TcgPei.inf
• 2) TCG TPM DXE driver produces EFI TCG protocol and measure the drivers which

are not from firmware.

• SecurityPkg/Tcg/TcgDxe/TcgDxe.inf
• 3) TCG SMM driver implements TPM definition block in ACPI table and registers

SMI callback functions for physical presence and MemoryClear to handle the requests from ACPI method.

• SecurityPkg/Tcg/TcgSmm/TcgSmm.inf
• 4) TCG UI driver provides a generic TCG configuration page in setup browser to

config TCG items.

• SecurityPkg/Tcg/TcgConfigDxe/TcgConfigDxe.inf
• 5) TCG physical presence PEI driver produces PEI_LOCK_PHYSICAL_PRESENCE_PPI to

indicate whether TPM need be locked in PEI phase or not. It can be replaced by a platform specific driver.

• SecurityPkg/Tcg/PhysicalPresencePei/PhysicalPresencePei.inf
• 6) TCG memory overwrite Control driver initilizes MemoryOverwriteRequestControl

variable. It will clear MOR_CLEAR_MEMORY_BIT bit if it is set.

• SecurityPkg/Tcg/MemoryOverwriteControl/TcgMor.inf

6. Add TPM drivers to the platform FDF file:

• INF SecurityPkg/Tcg/TcgPei/TcgPei.inf
• INF SecurityPkg/Tcg/TcgDxe/TcgDxe.inf
• INF SecurityPkg/Tcg/TcgSmm/TcgSmm.inf
• INF SecurityPkg/Tcg/TcgConfigDxe/TcgConfigDxe.inf
• INF SecurityPkg/Tcg/PhysicalPresencePei/PhysicalPresencePei.inf
• INF SecurityPkg/Tcg/MemoryOverwriteControl/TcgMor.inf

7. Set the platform policy by PCDs.

User can customize platform policy by changing the default PCD value in SecurityPkg.dec before building a platform.

• 1) TCG platform type

PCD PcdTpmPlatformClass specifies the type of TCG platform that contains TPM chip. Its value is set to 0 for PC client type by default. It should be set 1 for server.

• gEfiSecurityPkgTokenSpaceGuid.PcdTpmPlatformClass|0|UINT8|0x00000006
• 2) Hide TPM device

The TPM device can be hided from firmware and OS. PcdHideTpm can dynamically control whether to hide the TPM if PcdHideTpmSupport is set TRUE.

• gEfiSecurityPkgTokenSpaceGuid.PcdHideTpmSupport|FALSE|BOOLEAN|0x00000007

Additional Notes

1. In this version of implementation of authenticated variable service, we support:

• 1) Public exponent of RSA key value is fixed as 0x10001.
• 2) Encoding schema of RSA is PKCS1.15.

2. Currently certificate time expiration checking is ignored. 3. No real-time CRL checking requirements for performance and size restriction in pre-boot environment. 4. Variable Size Limitation: KEK/X509/Signature Database store as authenticated variables in the system, with the database size limitation of max variable size of the platform. Users may choose to increase max variable size by PCD or to delete unused items when the database is full.

- * Other names and brands may be claimed as the property of others.