Skip to content

Latest commit

 

History

History
26 lines (19 loc) · 973 Bytes

Readme.md

File metadata and controls

26 lines (19 loc) · 973 Bytes

DMOTE Firmware

This is the firmware, in Rust, for my Dactyl Manuform: Opposable Thumbs Edition (or DMOTE for short).

I used a STM32F103C8 MCU, wired into the two halfs of the keyboard as the controller. The tooling within assumes that you will flash this controller with a DAP42 probe attached.

This firmware has some unusual features:

  • Scanning of the key matrix is done entirely with DMA, without any interaction with the firmware.
  • "Qick-Draw" debouncing, minimizing key press latency, even when the debounce time is set very long.

Vendoring

This repo contains some vendored dependencies. In particular:

Dependency Reason
stm32f1 DMA to/from registers needs the .ptr() method on registers
stm32f1xx-hal Compatibility with vendored stm32f1 dep

I'm likely to un-vendor stm32f1 and stm32f1xx-hal when versions of them become available that meet my needs.