控制节点
- 网络配置
- SSH客户端排错
- 配置hostname
- 防火墙
- SELinux
- NTP服务
- Openstack Pike版本的YUM仓库
- Openstack 命令工具包
- MariaDB数据库
- RabbitMQ消息队列
- Memcached缓存
Note, it is a VirtualBox lab with Vagrant, the eth0 is reserved by Vagrant
[vagrant@localhost ~]$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 52:54:00:7a:69:5a brd ff:ff:ff:ff:ff:ff
inet 10.0.2.15/24 brd 10.0.2.255 scope global dynamic eth0
valid_lft 86137sec preferred_lft 86137sec
inet6 fe80::5054:ff:fe7a:695a/64 scope link
valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 08:00:27:68:ae:d9 brd ff:ff:ff:ff:ff:ff
4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 08:00:27:f6:b8:b3 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.102/24 brd 192.168.1.255 scope global dynamic eth2
valid_lft 7114sec preferred_lft 7114sec
inet6 fe80::c2a0:a308:c009:e870/64 scope link
valid_lft forever preferred_lft forever
[vagrant@localhost ~]$ ls /etc/sysconfig/network-scripts/ifcfg*
/etc/sysconfig/network-scripts/ifcfg-eth0 /etc/sysconfig/network-scripts/ifcfg-lo
/etc/sysconfig/network-scripts/ifcfg-eth2
Using nmcli, 较之于Windows的网络管理
[vagrant@localhost ~]$ nmcli d
DEVICE TYPE STATE CONNECTION
eth0 ethernet connected System eth0
eth1 ethernet connecting (getting IP configuration) Wired connection 1
eth2 ethernet connected Wired connection 2
lo loopback unmanaged --
[vagrant@localhost ~]$ nmcli c
NAME UUID TYPE DEVICE
System eth0 5fb06bd0-0bb0-7ffb-45f1-d6edd65f3e03 802-3-ethernet eth0
Wired connection 1 3c55af49-6222-3b6b-b91d-eb1b82b6005e 802-3-ethernet eth1
Wired connection 2 40ae81b3-2e97-30d3-b588-aecb3e142583 802-3-ethernet eth2
[vagrant@localhost ~]$ sudo nmcli con mod "Wired connection 1" ipv4.method manual ipv4.addr "10.64.33.64/24" ipv4.dns 8.8.4.4
[vagrant@localhost ~]$ cat /etc/sysconfig/network-scripts/ifcfg-Wired_connection_1
HWADDR=08:00:27:68:AE:D9
TYPE=Ethernet
PROXY_METHOD=none
BROWSER_ONLY=no
BOOTPROTO=none
IPADDR=10.64.33.64
PREFIX=24
DNS1=8.8.4.4
DEFROUTE=yes
IPV4_FAILURE_FATAL=no
IPV6INIT=yes
IPV6_AUTOCONF=yes
IPV6_DEFROUTE=yes
IPV6_FAILURE_FATAL=no
IPV6_ADDR_GEN_MODE=stable-privacy
NAME="Wired connection 1"
UUID=3c55af49-6222-3b6b-b91d-eb1b82b6005e
ONBOOT=yes
AUTOCONNECT_PRIORITY=-999
[vagrant@localhost ~]$ ip a show eth1
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 08:00:27:68:ae:d9 brd ff:ff:ff:ff:ff:ff
inet 10.64.33.64/24 brd 10.64.33.255 scope global eth1
valid_lft forever preferred_lft forever
inet6 fe80::a1f1:2c18:bc74:7a3d/64 scope link
valid_lft forever preferred_lft forever
[vagrant@localhost ~]$ sudo nmcli con reload
无法ssh, 显示Perission denied
tangf@DESKTOP-H68OQDV ~
$ ssh [email protected]
The authenticity of host '10.64.33.64 (10.64.33.64)' can't be established.
ECDSA key fingerprint is SHA256:rmUJwM3oz/L+uushIeJGRatrsRIxxxh79M5JMA+Ljzc.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '10.64.33.64' (ECDSA) to the list of known hosts.
[email protected]: Permission denied (publickey,gssapi-keyex,gssapi-with-mic).
Trouble shooting
$ ssh [email protected]
The authenticity of host '10.64.33.64 (10.64.33.64)' can't be established.
ECDSA key fingerprint is SHA256:rmUJwM3oz/L+uushIeJGRatrsRIxxxh79M5JMA+Ljzc.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '10.64.33.64' (ECDSA) to the list of known hosts.
[email protected]: Permission denied (publickey,gssapi-keyex,gssapi-with-mic).
tangf@DESKTOP-H68OQDV /cygdrive/g/https0x3A0x2F0x2Fapp.vagrantup.com0x2Fboxes0x2Fsearch/centos0x2Fboxes0x2F70x3A7.4
$ ssh -v [email protected]
OpenSSH_7.6p1, OpenSSL 1.0.2k 26 Jan 2017
debug1: Reading configuration data /etc/ssh_config
debug1: Connecting to 10.64.33.64 [10.64.33.64] port 22.
debug1: Connection established.
debug1: identity file /home/tangf/.ssh/id_rsa type 0
debug1: key_load_public: No such file or directory
debug1: identity file /home/tangf/.ssh/id_rsa-cert type -1
debug1: key_load_public: No such file or directory
debug1: identity file /home/tangf/.ssh/id_dsa type -1
debug1: key_load_public: No such file or directory
debug1: identity file /home/tangf/.ssh/id_dsa-cert type -1
debug1: key_load_public: No such file or directory
debug1: identity file /home/tangf/.ssh/id_ecdsa type -1
debug1: key_load_public: No such file or directory
debug1: identity file /home/tangf/.ssh/id_ecdsa-cert type -1
debug1: key_load_public: No such file or directory
debug1: identity file /home/tangf/.ssh/id_ed25519 type -1
debug1: key_load_public: No such file or directory
debug1: identity file /home/tangf/.ssh/id_ed25519-cert type -1
debug1: Local version string SSH-2.0-OpenSSH_7.6
debug1: Remote protocol version 2.0, remote software version OpenSSH_7.4
debug1: match: OpenSSH_7.4 pat OpenSSH* compat 0x04000000
debug1: Authenticating to 10.64.33.64:22 as 'vagrant'
debug1: SSH2_MSG_KEXINIT sent
debug1: SSH2_MSG_KEXINIT received
debug1: kex: algorithm: curve25519-sha256
debug1: kex: host key algorithm: ecdsa-sha2-nistp256
debug1: kex: server->client cipher: [email protected] MAC: <implicit> compression: none
debug1: kex: client->server cipher: [email protected] MAC: <implicit> compression: none
debug1: expecting SSH2_MSG_KEX_ECDH_REPLY
debug1: Server host key: ecdsa-sha2-nistp256 SHA256:rmUJwM3oz/L+uushIeJGRatrsRIxxxh79M5JMA+Ljzc
debug1: Host '10.64.33.64' is known and matches the ECDSA host key.
debug1: Found key in /home/tangf/.ssh/known_hosts:3
debug1: rekey after 134217728 blocks
debug1: SSH2_MSG_NEWKEYS sent
debug1: expecting SSH2_MSG_NEWKEYS
debug1: SSH2_MSG_NEWKEYS received
debug1: rekey after 134217728 blocks
debug1: SSH2_MSG_EXT_INFO received
debug1: kex_input_ext_info: server-sig-algs=<rsa-sha2-256,rsa-sha2-512>
debug1: SSH2_MSG_SERVICE_ACCEPT received
debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic
debug1: Next authentication method: publickey
debug1: Offering public key: RSA SHA256:aQKJuefmty0v2isbhCq6QKdZUUhlVo8AVQ/pTaY1v2Q /home/tangf/.ssh/id_rsa
debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic
debug1: Trying private key: /home/tangf/.ssh/id_dsa
debug1: Trying private key: /home/tangf/.ssh/id_ecdsa
debug1: Trying private key: /home/tangf/.ssh/id_ed25519
debug1: No more authentication methods to try.
[email protected]: Permission denied (publickey,gssapi-keyex,gssapi-with-mic).
查看sshd的配置
[vagrant@localhost ~]$ sudo cat /etc/ssh/sshd_config | egrep "^#?Password"
#PasswordAuthentication yes
PasswordAuthentication no
客户端上的公钥
tangf@DESKTOP-H68OQDV ~
$ cat ~/.ssh/id_rsa.pub
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCvfIdGduA81WVgf1F5DikDG+1qJEPk0FBYtMPk7WTEkb4p8KkqMKKdrt7Sy7Ig4ZIBwFCCU4rtHiaLeslNxwdjT1l1sH18uiNxjDtP/8RyDrGeED5id84RvIdcqZlS17mtxXg1KcALUOBm8EeRqT5yT1q6/DQWN0Q8aHP5XbVYZ9yotzoU0+uaHqjkf7lwATES/+4NpC/BlRF6uNd2oFC7pymhOhb/FbeJWJpLTHRFtdHVPQm/2VY6UH4auCaz3rDZP5Zd1sT1nsUnExII2y5NIMi7N/PNbU2vPPnXYwOrZiY7I/pGmu95r6oo3DkTyE3VdOaiXX6El6DAeNL1DRo5 tangf@DESKTOP-H68OQDV
注入，注意将authorized_keys的ACL模式该问600
[vagrant@localhost ~]$ echo "ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCvfIdGduA81WVgf1F5DikDG+1qJEPk0FBYtMPk7WTEkb4p8KkqMKKdrt7Sy7Ig4ZIBwFCCU4rtHiaLeslNxwdjT1l1sH18uiNxjDtP/8RyDrGeED5id84RvIdcqZlS17mtxXg1KcALUOBm8EeRqT5yT1q6/DQWN0Q8aHP5XbVYZ9yotzoU0+uaHqjkf7lwATES/+4NpC/BlRF6uNd2oFC7pymhOhb/FbeJWJpLTHRFtdHVPQm/2VY6UH4auCaz3rDZP5Zd1sT1nsUnExII2y5NIMi7N/PNbU2vPPnXYwOrZiY7I/pGmu95r6oo3DkTyE3VdOaiXX6El6DAeNL1DRo5 tangf@DESKTOP-H68OQDV" >> .ssh/authorized_keys
第一个公钥是vagrant注入的, 当前的登录(vagrant ssh)是使用与其对应的私钥
[vagrant@localhost ~]$ cat .ssh/authorized_keys
ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEA6NF8iallvQVp22WDkTkyrtvp9eWW6A8YVr+kz4TjGYe7gHzIw+niNltGEFHzD8+v1I2YJ6oXevct1YeS0o9HZyN1Q9qgCgzUFtdOKLv6IedplqoPkcmF0aYet2PkEDo3MlTBckFXPITAMzF8dJSIFo9D8HfdOV0IAdx4O7PtixWKn5y2hMNG0zQPyUecp4pzC6kivAIhyfHilFR61RGL+GPXQ2MWZWFYbAGjyiYJnAmCP3NOTd0jMZEnDkbUvxhMmBYSdETk1rRgm+R4LOzFUGaHqHDLKLX+FIPKcF96hrucXzcWyLbIbEgE98OHlnVYCzRdK8jlqm8tehUc9c9WhQ== vagrant insecure public key
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCvfIdGduA81WVgf1F5DikDG+1qJEPk0FBYtMPk7WTEkb4p8KkqMKKdrt7Sy7Ig4ZIBwFCCU4rtHiaLeslNxwdjT1l1sH18uiNxjDtP/8RyDrGeED5id84RvIdcqZlS17mtxXg1KcALUOBm8EeRqT5yT1q6/DQWN0Q8aHP5XbVYZ9yotzoU0+uaHqjkf7lwATES/+4NpC/BlRF6uNd2oFC7pymhOhb/FbeJWJpLTHRFtdHVPQm/2VY6UH4auCaz3rDZP5Zd1sT1nsUnExII2y5NIMi7N/PNbU2vPPnXYwOrZiY7I/pGmu95r6oo3DkTyE3VdOaiXX6El6DAeNL1DRo5 tangf@DESKTOP-H68OQDV
使用客户端的公私钥再次登入
tangf@DESKTOP-H68OQDV /cygdrive/g/https0x3A0x2F0x2Fapp.vagrantup.com0x2Fboxes0x2Fsearch/centos0x2Fboxes0x2F70x3A7.4
$ ssh [email protected]
Last login: Fri Oct 20 17:33:00 2017 from 10.0.2.2
Backup
[vagrant@localhost ~]$ sudo cp /etc/hostname etc0x2Fhostname
Name
[vagrant@localhost ~]$ echo "controller-10-64-33-64" > hostname
Modify
[vagrant@localhost ~]$ sudo cp hostname /etc/hostname
Set
[vagrant@localhost ~]$ sudo hostname --file hostname
Check
[vagrant@localhost ~]$ hostname
controller-10-64-33-64
Check
[vagrant@localhost ~]$ systemctl is-active firewalld.service
unknown
Current
[vagrant@localhost ~]$ sudo getenforce
Enforcing
Set
[vagrant@localhost ~]$ sudo setenforce Permissive
Permanently Modify
[vagrant@localhost ~]$ sudo sed -i 's/\(^SELINUX=enforcing$\)/#\1\nSELINUX=permissive/' /etc/selinux/config
安装网络时间协议服务
[vagrant@localhost ~]$ yum search --verbose chrony
Loading "fastestmirror" plugin
Config time: 0.004
Yum version: 3.4.3
Setting up Package Sacks
Loading mirror speeds from cached hostfile
* base: mirrors.aliyun.com
* extras: mirrors.aliyun.com
* updates: mirrors.sohu.com
pkgsack time: 0.008
rpmdb time: 0.000
tags time: 0.000
============================================================== N/S matched: chrony ===============================================================
chrony.x86_64 : An NTP client/server
Repo : @anaconda
Name and summary matches only, use "search all" for everything.
[vagrant@localhost ~]$ systemctl -l status chronyd.service
● chronyd.service - NTP client/server
Loaded: loaded (/usr/lib/systemd/system/chronyd.service; enabled; vendor preset: enabled)
Active: active (running) since Fri 2017-10-20 17:28:38 UTC; 1h 33min ago
Docs: man:chronyd(8)
man:chrony.conf(5)
Process: 595 ExecStartPost=/usr/libexec/chrony-helper update-daemon (code=exited, status=0/SUCCESS)
Process: 570 ExecStart=/usr/sbin/chronyd $OPTIONS (code=exited, status=0/SUCCESS)
Main PID: 594 (chronyd)
CGroup: /system.slice/chronyd.service
└─594 /usr/sbin/chronyd
Default conf
[vagrant@localhost ~]$ cat /etc/chrony.conf | egrep "server|allow"
# Use public servers from the pool.ntp.org project.
server 0.centos.pool.ntp.org iburst
server 1.centos.pool.ntp.org iburst
server 2.centos.pool.ntp.org iburst
server 3.centos.pool.ntp.org iburst
#allow 192.168.0.0/16
Verifying
[vagrant@localhost ~]$ chronyc sources
210 Number of sources = 4
MS Name/IP address Stratum Poll Reach LastRx Last sample
===============================================================================
^* dns2.ecust.edu.cn 3 8 163 461 -19ms[ -19ms] +/- 94ms
^+ leontp.ccgs.wa.edu.au 1 8 377 1109 +33ms[ +33ms] +/- 125ms
^+ biisoni.miuku.net 2 9 371 394 -10ms[ -10ms] +/- 123ms
^- ntp1.ams1.nl.leaseweb.net 2 10 345 341 +10ms[ +10ms] +/- 236ms
加入OpenStack RDO (newton, ocata, pike)的YUM源
[vagrant@localhost ~]$ yum search openstack
Loaded plugins: fastestmirror
Determining fastest mirrors
* base: mirrors.aliyun.com
* extras: mirrors.aliyun.com
* updates: mirrors.sohu.com
============================================================= N/S matched: openstack =============================================================
centos-release-openstack-newton.noarch : OpenStack from the CentOS Cloud SIG repo configs
centos-release-openstack-ocata.noarch : OpenStack from the CentOS Cloud SIG repo configs
centos-release-openstack-pike.x86_64 : OpenStack from the CentOS Cloud SIG repo configs
Name and summary matches only, use "search all" for everything.
Choose pike
[vagrant@localhost ~]$ sudo yum install -y centos-release-openstack-pike
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: mirrors.aliyun.com
* extras: mirrors.aliyun.com
* updates: mirrors.sohu.com
Resolving Dependencies
--> Running transaction check
---> Package centos-release-openstack-pike.x86_64 0:1-1.el7 will be installed
--> Processing Dependency: centos-release-qemu-ev for package: centos-release-openstack-pike-1-1.el7.x86_64
--> Processing Dependency: centos-release-ceph-jewel for package: centos-release-openstack-pike-1-1.el7.x86_64
--> Running transaction check
---> Package centos-release-ceph-jewel.noarch 0:1.0-1.el7.centos will be installed
--> Processing Dependency: centos-release-storage-common for package: centos-release-ceph-jewel-1.0-1.el7.centos.noarch
---> Package centos-release-qemu-ev.noarch 0:1.0-2.el7 will be installed
--> Processing Dependency: centos-release-virt-common for package: centos-release-qemu-ev-1.0-2.el7.noarch
--> Running transaction check
---> Package centos-release-storage-common.noarch 0:1-2.el7.centos will be installed
---> Package centos-release-virt-common.noarch 0:1-1.el7.centos will be installed
--> Finished Dependency Resolution
Dependencies Resolved
==================================================================================================================================================
Package Arch Version Repository Size
==================================================================================================================================================
Installing:
centos-release-openstack-pike x86_64 1-1.el7 extras 5.3 k
Installing for dependencies:
centos-release-ceph-jewel noarch 1.0-1.el7.centos extras 4.1 k
centos-release-qemu-ev noarch 1.0-2.el7 extras 11 k
centos-release-storage-common noarch 1-2.el7.centos extras 4.5 k
centos-release-virt-common noarch 1-1.el7.centos extras 4.5 k
Transaction Summary
==================================================================================================================================================
Install 1 Package (+4 Dependent packages)
Total download size: 29 k
Installed size: 23 k
Downloading packages:
warning: /var/cache/yum/x86_64/7/extras/packages/centos-release-ceph-jewel-1.0-1.el7.centos.noarch.rpm: Header V3 RSA/SHA256 Signature, key ID f4a80eb5: NOKEY
Public key for centos-release-ceph-jewel-1.0-1.el7.centos.noarch.rpm is not installed
(1/5): centos-release-ceph-jewel-1.0-1.el7.centos.noarch.rpm | 4.1 kB 00:00:00
(2/5): centos-release-openstack-pike-1-1.el7.x86_64.rpm | 5.3 kB 00:00:00
(3/5): centos-release-storage-common-1-2.el7.centos.noarch.rpm | 4.5 kB 00:00:00
(4/5): centos-release-qemu-ev-1.0-2.el7.noarch.rpm | 11 kB 00:00:00
(5/5): centos-release-virt-common-1-1.el7.centos.noarch.rpm | 4.5 kB 00:00:00
--------------------------------------------------------------------------------------------------------------------------------------------------
Total 83 kB/s | 29 kB 00:00:00
Retrieving key from file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
Importing GPG key 0xF4A80EB5:
Userid : "CentOS-7 Key (CentOS 7 Official Signing Key) <[email protected]>"
Fingerprint: 6341 ab27 53d7 8a78 a7c2 7bb1 24c6 a8a7 f4a8 0eb5
Package : centos-release-7-4.1708.el7.centos.x86_64 (@anaconda)
From : /etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-7
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : centos-release-virt-common-1-1.el7.centos.noarch 1/5
Installing : centos-release-qemu-ev-1.0-2.el7.noarch 2/5
Installing : centos-release-storage-common-1-2.el7.centos.noarch 3/5
Installing : centos-release-ceph-jewel-1.0-1.el7.centos.noarch 4/5
Installing : centos-release-openstack-pike-1-1.el7.x86_64 5/5
Verifying : centos-release-storage-common-1-2.el7.centos.noarch 1/5
Verifying : centos-release-openstack-pike-1-1.el7.x86_64 2/5
Verifying : centos-release-ceph-jewel-1.0-1.el7.centos.noarch 3/5
Verifying : centos-release-virt-common-1-1.el7.centos.noarch 4/5
Verifying : centos-release-qemu-ev-1.0-2.el7.noarch 5/5
Installed:
centos-release-openstack-pike.x86_64 0:1-1.el7
Dependency Installed:
centos-release-ceph-jewel.noarch 0:1.0-1.el7.centos centos-release-qemu-ev.noarch 0:1.0-2.el7
centos-release-storage-common.noarch 0:1-2.el7.centos centos-release-virt-common.noarch 0:1-1.el7.centos
Complete!
[vagrant@localhost ~]$ ls -1 /etc/yum.repos.d/ | egrep 'OpenStack|Ceph'
CentOS-Ceph-Jewel.repo
CentOS-OpenStack-pike.repo
[vagrant@localhost ~]$ head /etc/yum.repos.d/CentOS-OpenStack-pike.repo
# CentOS-OpenStack-pike.repo
#
# Please see http://wiki.centos.org/SpecialInterestGroup/Cloud for more
# information
[centos-openstack-pike]
name=CentOS-7 - OpenStack pike
baseurl=http://mirror.centos.org/centos/7/cloud/$basearch/openstack-pike/
gpgcheck=1
enabled=1
YUM安装
[vagrant@localhost ~]$ sudo yum install -y python-openstackclient
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: mirrors.aliyun.com
* extras: mirrors.aliyun.com
* updates: mirrors.sohu.com
Resolving Dependencies
--> Running transaction check
---> Package python2-openstackclient.noarch 0:3.12.0-1.el7 will be installed
--> Processing Dependency: python-openstackclient-lang = 3.12.0-1.el7 for package: python2-openstackclient-3.12.0-1.el7.noarch
--> Processing Dependency: python-osc-lib >= 1.7.0 for package: python2-openstackclient-3.12.0-1.el7.noarch
--> Processing Dependency: python-openstacksdk >= 0.9.17 for package: python2-openstackclient-3.12.0-1.el7.noarch
--> Processing Dependency: python-novaclient >= 1:9.0.0 for package: python2-openstackclient-3.12.0-1.el7.noarch
--> Processing Dependency: python-neutronclient >= 6.3.0 for package: python2-openstackclient-3.12.0-1.el7.noarch
--> Processing Dependency: python-glanceclient >= 1:2.8.0 for package: python2-openstackclient-3.12.0-1.el7.noarch
--> Processing Dependency: python-cinderclient >= 3.1.0 for package: python2-openstackclient-3.12.0-1.el7.noarch
--> Processing Dependency: python-cliff for package: python2-openstackclient-3.12.0-1.el7.noarch
--> Running transaction check
---> Package python-cliff.noarch 0:2.8.0-1.el7 will be installed
--> Processing Dependency: python-cmd2 >= 0.6.7 for package: python-cliff-2.8.0-1.el7.noarch
--> Processing Dependency: python-unicodecsv for package: python-cliff-2.8.0-1.el7.noarch
---> Package python-openstackclient-lang.noarch 0:3.12.0-1.el7 will be installed
---> Package python2-cinderclient.noarch 0:3.1.0-1.el7 will be installed
--> Processing Dependency: python-simplejson for package: python2-cinderclient-3.1.0-1.el7.noarch
---> Package python2-glanceclient.noarch 1:2.8.0-1.el7 will be installed
--> Processing Dependency: python-warlock for package: 1:python2-glanceclient-2.8.0-1.el7.noarch
---> Package python2-neutronclient.noarch 0:6.5.0-1.el7 will be installed
--> Processing Dependency: python-os-client-config >= 1.28.0 for package: python2-neutronclient-6.5.0-1.el7.noarch
---> Package python2-novaclient.noarch 1:9.1.1-1.el7 will be installed
---> Package python2-openstacksdk.noarch 0:0.9.17-1.el7 will be installed
--> Processing Dependency: python-jsonpatch >= 1.1 for package: python2-openstacksdk-0.9.17-1.el7.noarch
--> Processing Dependency: python-deprecation for package: python2-openstacksdk-0.9.17-1.el7.noarch
---> Package python2-osc-lib.noarch 0:1.7.0-1.el7 will be installed
--> Running transaction check
---> Package python-cmd2.noarch 0:0.6.8-8.el7 will be installed
---> Package python-simplejson.x86_64 0:3.5.3-5.el7 will be installed
---> Package python-unicodecsv.noarch 0:0.14.1-1.el7 will be installed
---> Package python-warlock.noarch 0:1.0.1-1.el7 will be installed
---> Package python2-deprecation.noarch 0:1.0-3.el7 will be installed
---> Package python2-jsonpatch.noarch 0:1.14-1.el7 will be installed
--> Processing Dependency: python-jsonpointer for package: python2-jsonpatch-1.14-1.el7.noarch
---> Package python2-os-client-config.noarch 0:1.28.0-1.el7 will be installed
--> Processing Dependency: python-requestsexceptions >= 1.2.0 for package: python2-os-client-config-1.28.0-1.el7.noarch
--> Processing Dependency: python-appdirs >= 1.3.0 for package: python2-os-client-config-1.28.0-1.el7.noarch
--> Running transaction check
---> Package python2-appdirs.noarch 0:1.4.0-4.el7 will be installed
---> Package python2-jsonpointer.noarch 0:1.10-4.el7 will be installed
---> Package python2-requestsexceptions.noarch 0:1.3.0-1.el7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
==================================================================================================================================================
Package Arch Version Repository Size
==================================================================================================================================================
Installing:
python2-openstackclient noarch 3.12.0-1.el7 centos-openstack-pike 1.0 M
Installing for dependencies:
python-cliff noarch 2.8.0-1.el7 centos-openstack-pike 81 k
python-cmd2 noarch 0.6.8-8.el7 centos-openstack-pike 41 k
python-openstackclient-lang noarch 3.12.0-1.el7 centos-openstack-pike 14 k
python-simplejson x86_64 3.5.3-5.el7 centos-openstack-pike 185 k
python-unicodecsv noarch 0.14.1-1.el7 centos-openstack-pike 25 k
python-warlock noarch 1.0.1-1.el7 centos-openstack-pike 14 k
python2-appdirs noarch 1.4.0-4.el7 centos-openstack-pike 16 k
python2-cinderclient noarch 3.1.0-1.el7 centos-openstack-pike 238 k
python2-deprecation noarch 1.0-3.el7 centos-openstack-pike 15 k
python2-glanceclient noarch 1:2.8.0-1.el7 centos-openstack-pike 134 k
python2-jsonpatch noarch 1.14-1.el7 centos-openstack-pike 22 k
python2-jsonpointer noarch 1.10-4.el7 centos-openstack-pike 14 k
python2-neutronclient noarch 6.5.0-1.el7 centos-openstack-pike 269 k
python2-novaclient noarch 1:9.1.1-1.el7 centos-openstack-pike 211 k
python2-openstacksdk noarch 0.9.17-1.el7 centos-openstack-pike 334 k
python2-os-client-config noarch 1.28.0-1.el7 centos-openstack-pike 79 k
python2-osc-lib noarch 1.7.0-1.el7 centos-openstack-pike 65 k
python2-requestsexceptions noarch 1.3.0-1.el7 centos-openstack-pike 11 k
Transaction Summary
==================================================================================================================================================
Install 1 Package (+18 Dependent packages)
Total download size: 2.7 M
Installed size: 15 M
Downloading packages:
(1/19): python-cmd2-0.6.8-8.el7.noarch.rpm | 41 kB 00:00:01
(2/19): python-openstackclient-lang-3.12.0-1.el7.noarch.rpm | 14 kB 00:00:00
(3/19): python-cliff-2.8.0-1.el7.noarch.rpm | 81 kB 00:00:01
(4/19): python-unicodecsv-0.14.1-1.el7.noarch.rpm | 25 kB 00:00:00
(5/19): python-warlock-1.0.1-1.el7.noarch.rpm | 14 kB 00:00:00
(6/19): python2-appdirs-1.4.0-4.el7.noarch.rpm | 16 kB 00:00:00
(7/19): python-simplejson-3.5.3-5.el7.x86_64.rpm | 185 kB 00:00:01
(8/19): python2-deprecation-1.0-3.el7.noarch.rpm | 15 kB 00:00:00
(9/19): python2-glanceclient-2.8.0-1.el7.noarch.rpm | 134 kB 00:00:00
(10/19): python2-cinderclient-3.1.0-1.el7.noarch.rpm | 238 kB 00:00:00
(11/19): python2-jsonpatch-1.14-1.el7.noarch.rpm | 22 kB 00:00:00
(12/19): python2-jsonpointer-1.10-4.el7.noarch.rpm | 14 kB 00:00:00
(13/19): python2-neutronclient-6.5.0-1.el7.noarch.rpm | 269 kB 00:00:00
(14/19): python2-novaclient-9.1.1-1.el7.noarch.rpm | 211 kB 00:00:01
(15/19): python2-openstackclient-3.12.0-1.el7.noarch.rpm | 1.0 MB 00:00:01
(16/19): python2-os-client-config-1.28.0-1.el7.noarch.rpm | 79 kB 00:00:00
(17/19): python2-osc-lib-1.7.0-1.el7.noarch.rpm | 65 kB 00:00:00
(18/19): python2-requestsexceptions-1.3.0-1.el7.noarch.rpm | 11 kB 00:00:00
(19/19): python2-openstacksdk-0.9.17-1.el7.noarch.rpm | 334 kB 00:00:01
--------------------------------------------------------------------------------------------------------------------------------------------------
Total 432 kB/s | 2.7 MB 00:00:06
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : python-simplejson-3.5.3-5.el7.x86_64 1/19
Installing : 1:python2-novaclient-9.1.1-1.el7.noarch 2/19
Installing : python2-cinderclient-3.1.0-1.el7.noarch 3/19
Installing : python2-jsonpointer-1.10-4.el7.noarch 4/19
Installing : python2-jsonpatch-1.14-1.el7.noarch 5/19
Installing : python-warlock-1.0.1-1.el7.noarch 6/19
Installing : 1:python2-glanceclient-2.8.0-1.el7.noarch 7/19
Installing : python2-appdirs-1.4.0-4.el7.noarch 8/19
Installing : python-openstackclient-lang-3.12.0-1.el7.noarch 9/19
Installing : python-cmd2-0.6.8-8.el7.noarch 10/19
Installing : python2-requestsexceptions-1.3.0-1.el7.noarch 11/19
Installing : python2-os-client-config-1.28.0-1.el7.noarch 12/19
Installing : python-unicodecsv-0.14.1-1.el7.noarch 13/19
Installing : python-cliff-2.8.0-1.el7.noarch 14/19
Installing : python2-osc-lib-1.7.0-1.el7.noarch 15/19
Installing : python2-neutronclient-6.5.0-1.el7.noarch 16/19
Installing : python2-deprecation-1.0-3.el7.noarch 17/19
Installing : python2-openstacksdk-0.9.17-1.el7.noarch 18/19
Installing : python2-openstackclient-3.12.0-1.el7.noarch 19/19
Verifying : python2-deprecation-1.0-3.el7.noarch 1/19
Verifying : python2-os-client-config-1.28.0-1.el7.noarch 2/19
Verifying : python-simplejson-3.5.3-5.el7.x86_64 3/19
Verifying : 1:python2-novaclient-9.1.1-1.el7.noarch 4/19
Verifying : python-cliff-2.8.0-1.el7.noarch 5/19
Verifying : python2-openstacksdk-0.9.17-1.el7.noarch 6/19
Verifying : python2-jsonpatch-1.14-1.el7.noarch 7/19
Verifying : python2-cinderclient-3.1.0-1.el7.noarch 8/19
Verifying : python2-openstackclient-3.12.0-1.el7.noarch 9/19
Verifying : python-unicodecsv-0.14.1-1.el7.noarch 10/19
Verifying : python2-requestsexceptions-1.3.0-1.el7.noarch 11/19
Verifying : python2-neutronclient-6.5.0-1.el7.noarch 12/19
Verifying : python-cmd2-0.6.8-8.el7.noarch 13/19
Verifying : 1:python2-glanceclient-2.8.0-1.el7.noarch 14/19
Verifying : python-warlock-1.0.1-1.el7.noarch 15/19
Verifying : python-openstackclient-lang-3.12.0-1.el7.noarch 16/19
Verifying : python2-appdirs-1.4.0-4.el7.noarch 17/19
Verifying : python2-jsonpointer-1.10-4.el7.noarch 18/19
Verifying : python2-osc-lib-1.7.0-1.el7.noarch 19/19
Installed:
python2-openstackclient.noarch 0:3.12.0-1.el7
Dependency Installed:
python-cliff.noarch 0:2.8.0-1.el7 python-cmd2.noarch 0:0.6.8-8.el7 python-openstackclient-lang.noarch 0:3.12.0-1.el7
python-simplejson.x86_64 0:3.5.3-5.el7 python-unicodecsv.noarch 0:0.14.1-1.el7 python-warlock.noarch 0:1.0.1-1.el7
python2-appdirs.noarch 0:1.4.0-4.el7 python2-cinderclient.noarch 0:3.1.0-1.el7 python2-deprecation.noarch 0:1.0-3.el7
python2-glanceclient.noarch 1:2.8.0-1.el7 python2-jsonpatch.noarch 0:1.14-1.el7 python2-jsonpointer.noarch 0:1.10-4.el7
python2-neutronclient.noarch 0:6.5.0-1.el7 python2-novaclient.noarch 1:9.1.1-1.el7 python2-openstacksdk.noarch 0:0.9.17-1.el7
python2-os-client-config.noarch 0:1.28.0-1.el7 python2-osc-lib.noarch 0:1.7.0-1.el7 python2-requestsexceptions.noarch 0:1.3.0-1.el7
Complete!
[vagrant@localhost ~]$ openstack --version
openstack 3.12.0
MySQL数据库分支(MariaDB)
[vagrant@localhost ~]$ yum list | egrep '^mariadb\.'
mariadb.x86_64 3:10.1.20-1.el7 centos-openstack-pike
Install
[vagrant@localhost ~]$ sudo yum install -y mariadb mariadb-server python2-PyMySQL
Loaded plugins: fastestmirror
centos-ceph-jewel | 2.9 kB 00:00:00
centos-openstack-pike | 2.9 kB 00:00:00
centos-qemu-ev | 2.9 kB 00:00:00
(1/3): centos-qemu-ev/7/x86_64/primary_db | 23 kB 00:00:01
(2/3): centos-ceph-jewel/7/x86_64/primary_db | 42 kB 00:00:01
(3/3): centos-openstack-pike/x86_64/primary_db | 758 kB 00:00:03
Loading mirror speeds from cached hostfile
* base: mirrors.aliyun.com
* extras: mirrors.aliyun.com
* updates: mirrors.sohu.com
Resolving Dependencies
--> Running transaction check
---> Package mariadb.x86_64 3:10.1.20-1.el7 will be installed
--> Processing Dependency: mariadb-libs(x86-64) = 3:10.1.20-1.el7 for package: 3:mariadb-10.1.20-1.el7.x86_64
--> Processing Dependency: mariadb-common(x86-64) = 3:10.1.20-1.el7 for package: 3:mariadb-10.1.20-1.el7.x86_64
--> Processing Dependency: perl(Sys::Hostname) for package: 3:mariadb-10.1.20-1.el7.x86_64
--> Processing Dependency: perl(IPC::Open3) for package: 3:mariadb-10.1.20-1.el7.x86_64
--> Processing Dependency: perl(Getopt::Long) for package: 3:mariadb-10.1.20-1.el7.x86_64
--> Processing Dependency: perl(File::Temp) for package: 3:mariadb-10.1.20-1.el7.x86_64
--> Processing Dependency: perl(Fcntl) for package: 3:mariadb-10.1.20-1.el7.x86_64
--> Processing Dependency: perl(Exporter) for package: 3:mariadb-10.1.20-1.el7.x86_64
--> Processing Dependency: /usr/bin/perl for package: 3:mariadb-10.1.20-1.el7.x86_64
---> Package mariadb-server.x86_64 3:10.1.20-1.el7 will be installed
--> Processing Dependency: mariadb-errmsg(x86-64) = 3:10.1.20-1.el7 for package: 3:mariadb-server-10.1.20-1.el7.x86_64
--> Processing Dependency: perl(File::Path) for package: 3:mariadb-server-10.1.20-1.el7.x86_64
--> Processing Dependency: perl(Data::Dumper) for package: 3:mariadb-server-10.1.20-1.el7.x86_64
--> Processing Dependency: perl(DBI) for package: 3:mariadb-server-10.1.20-1.el7.x86_64
--> Processing Dependency: perl(DBD::mysql) for package: 3:mariadb-server-10.1.20-1.el7.x86_64
--> Processing Dependency: net-tools for package: 3:mariadb-server-10.1.20-1.el7.x86_64
--> Processing Dependency: lsof for package: 3:mariadb-server-10.1.20-1.el7.x86_64
--> Processing Dependency: /etc/my.cnf.d for package: 3:mariadb-server-10.1.20-1.el7.x86_64
--> Processing Dependency: /etc/my.cnf for package: 3:mariadb-server-10.1.20-1.el7.x86_64
---> Package python2-PyMySQL.noarch 0:0.7.11-1.el7 will be installed
--> Running transaction check
---> Package lsof.x86_64 0:4.87-4.el7 will be installed
---> Package mariadb-common.x86_64 3:10.1.20-1.el7 will be installed
---> Package mariadb-config.x86_64 3:10.1.20-1.el7 will be installed
---> Package mariadb-errmsg.x86_64 3:10.1.20-1.el7 will be installed
---> Package mariadb-libs.x86_64 1:5.5.56-2.el7 will be updated
---> Package mariadb-libs.x86_64 1:5.5.56-2.el7 will be updated
---> Package mariadb-libs.x86_64 3:10.1.20-1.el7 will be an update
---> Package net-tools.x86_64 0:2.0-0.22.20131004git.el7 will be installed
---> Package perl.x86_64 4:5.16.3-292.el7 will be installed
--> Processing Dependency: perl-libs = 4:5.16.3-292.el7 for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(Socket) >= 1.3 for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(Scalar::Util) >= 1.10 for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl-macros for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl-libs for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(threads::shared) for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(threads) for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(constant) for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(Time::Local) for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(Time::HiRes) for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(Storable) for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(Socket) for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(Scalar::Util) for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(Pod::Simple::XHTML) for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(Pod::Simple::Search) for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(Filter::Util::Call) for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(File::Spec::Unix) for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(File::Spec::Functions) for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(File::Spec) for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(Cwd) for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: perl(Carp) for package: 4:perl-5.16.3-292.el7.x86_64
--> Processing Dependency: libperl.so()(64bit) for package: 4:perl-5.16.3-292.el7.x86_64
---> Package perl-DBD-MySQL.x86_64 0:4.023-5.el7 will be installed
---> Package perl-DBI.x86_64 0:1.627-4.el7 will be installed
--> Processing Dependency: perl(RPC::PlServer) >= 0.2001 for package: perl-DBI-1.627-4.el7.x86_64
--> Processing Dependency: perl(RPC::PlClient) >= 0.2000 for package: perl-DBI-1.627-4.el7.x86_64
---> Package perl-Data-Dumper.x86_64 0:2.145-3.el7 will be installed
---> Package perl-Exporter.noarch 0:5.68-3.el7 will be installed
---> Package perl-File-Path.noarch 0:2.09-2.el7 will be installed
---> Package perl-File-Temp.noarch 0:0.23.01-3.el7 will be installed
---> Package perl-Getopt-Long.noarch 0:2.40-2.el7 will be installed
--> Processing Dependency: perl(Pod::Usage) >= 1.14 for package: perl-Getopt-Long-2.40-2.el7.noarch
--> Processing Dependency: perl(Text::ParseWords) for package: perl-Getopt-Long-2.40-2.el7.noarch
--> Running transaction check
---> Package perl-Carp.noarch 0:1.26-244.el7 will be installed
---> Package perl-Filter.x86_64 0:1.49-3.el7 will be installed
---> Package perl-PathTools.x86_64 0:3.40-5.el7 will be installed
---> Package perl-PlRPC.noarch 0:0.2020-14.el7 will be installed
--> Processing Dependency: perl(Net::Daemon) >= 0.13 for package: perl-PlRPC-0.2020-14.el7.noarch
--> Processing Dependency: perl(Net::Daemon::Test) for package: perl-PlRPC-0.2020-14.el7.noarch
--> Processing Dependency: perl(Net::Daemon::Log) for package: perl-PlRPC-0.2020-14.el7.noarch
--> Processing Dependency: perl(Compress::Zlib) for package: perl-PlRPC-0.2020-14.el7.noarch
---> Package perl-Pod-Simple.noarch 1:3.28-4.el7 will be installed
--> Processing Dependency: perl(Pod::Escapes) >= 1.04 for package: 1:perl-Pod-Simple-3.28-4.el7.noarch
--> Processing Dependency: perl(Encode) for package: 1:perl-Pod-Simple-3.28-4.el7.noarch
---> Package perl-Pod-Usage.noarch 0:1.63-3.el7 will be installed
--> Processing Dependency: perl(Pod::Text) >= 3.15 for package: perl-Pod-Usage-1.63-3.el7.noarch
--> Processing Dependency: perl-Pod-Perldoc for package: perl-Pod-Usage-1.63-3.el7.noarch
---> Package perl-Scalar-List-Utils.x86_64 0:1.27-248.el7 will be installed
---> Package perl-Socket.x86_64 0:2.010-4.el7 will be installed
---> Package perl-Storable.x86_64 0:2.45-3.el7 will be installed
---> Package perl-Text-ParseWords.noarch 0:3.29-4.el7 will be installed
---> Package perl-Time-HiRes.x86_64 4:1.9725-3.el7 will be installed
---> Package perl-Time-Local.noarch 0:1.2300-2.el7 will be installed
---> Package perl-constant.noarch 0:1.27-2.el7 will be installed
---> Package perl-libs.x86_64 4:5.16.3-292.el7 will be installed
---> Package perl-macros.x86_64 4:5.16.3-292.el7 will be installed
---> Package perl-threads.x86_64 0:1.87-4.el7 will be installed
---> Package perl-threads-shared.x86_64 0:1.43-6.el7 will be installed
--> Running transaction check
---> Package perl-Encode.x86_64 0:2.51-7.el7 will be installed
---> Package perl-IO-Compress.noarch 0:2.061-2.el7 will be installed
--> Processing Dependency: perl(Compress::Raw::Zlib) >= 2.061 for package: perl-IO-Compress-2.061-2.el7.noarch
--> Processing Dependency: perl(Compress::Raw::Bzip2) >= 2.061 for package: perl-IO-Compress-2.061-2.el7.noarch
---> Package perl-Net-Daemon.noarch 0:0.48-5.el7 will be installed
---> Package perl-Pod-Escapes.noarch 1:1.04-292.el7 will be installed
---> Package perl-Pod-Perldoc.noarch 0:3.20-4.el7 will be installed
--> Processing Dependency: perl(parent) for package: perl-Pod-Perldoc-3.20-4.el7.noarch
--> Processing Dependency: perl(HTTP::Tiny) for package: perl-Pod-Perldoc-3.20-4.el7.noarch
---> Package perl-podlators.noarch 0:2.5.1-3.el7 will be installed
--> Running transaction check
---> Package perl-Compress-Raw-Bzip2.x86_64 0:2.061-3.el7 will be installed
---> Package perl-Compress-Raw-Zlib.x86_64 1:2.061-4.el7 will be installed
---> Package perl-HTTP-Tiny.noarch 0:0.033-3.el7 will be installed
---> Package perl-parent.noarch 1:0.225-244.el7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
==================================================================================================================================================
Package Arch Version Repository Size
==================================================================================================================================================
Installing:
mariadb x86_64 3:10.1.20-1.el7 centos-openstack-pike 6.3 M
mariadb-server x86_64 3:10.1.20-1.el7 centos-openstack-pike 19 M
python2-PyMySQL noarch 0.7.11-1.el7 centos-openstack-pike 150 k
Installing for dependencies:
lsof x86_64 4.87-4.el7 base 331 k
mariadb-common x86_64 3:10.1.20-1.el7 centos-openstack-pike 63 k
mariadb-config x86_64 3:10.1.20-1.el7 centos-openstack-pike 26 k
mariadb-errmsg x86_64 3:10.1.20-1.el7 centos-openstack-pike 200 k
net-tools x86_64 2.0-0.22.20131004git.el7 base 305 k
perl x86_64 4:5.16.3-292.el7 base 8.0 M
perl-Carp noarch 1.26-244.el7 base 19 k
perl-Compress-Raw-Bzip2 x86_64 2.061-3.el7 base 32 k
perl-Compress-Raw-Zlib x86_64 1:2.061-4.el7 base 57 k
perl-DBD-MySQL x86_64 4.023-5.el7 base 140 k
perl-DBI x86_64 1.627-4.el7 base 802 k
perl-Data-Dumper x86_64 2.145-3.el7 base 47 k
perl-Encode x86_64 2.51-7.el7 base 1.5 M
perl-Exporter noarch 5.68-3.el7 base 28 k
perl-File-Path noarch 2.09-2.el7 base 26 k
perl-File-Temp noarch 0.23.01-3.el7 base 56 k
perl-Filter x86_64 1.49-3.el7 base 76 k
perl-Getopt-Long noarch 2.40-2.el7 base 56 k
perl-HTTP-Tiny noarch 0.033-3.el7 base 38 k
perl-IO-Compress noarch 2.061-2.el7 base 260 k
perl-Net-Daemon noarch 0.48-5.el7 base 51 k
perl-PathTools x86_64 3.40-5.el7 base 82 k
perl-PlRPC noarch 0.2020-14.el7 base 36 k
perl-Pod-Escapes noarch 1:1.04-292.el7 base 51 k
perl-Pod-Perldoc noarch 3.20-4.el7 base 87 k
perl-Pod-Simple noarch 1:3.28-4.el7 base 216 k
perl-Pod-Usage noarch 1.63-3.el7 base 27 k
perl-Scalar-List-Utils x86_64 1.27-248.el7 base 36 k
perl-Socket x86_64 2.010-4.el7 base 49 k
perl-Storable x86_64 2.45-3.el7 base 77 k
perl-Text-ParseWords noarch 3.29-4.el7 base 14 k
perl-Time-HiRes x86_64 4:1.9725-3.el7 base 45 k
perl-Time-Local noarch 1.2300-2.el7 base 24 k
perl-constant noarch 1.27-2.el7 base 19 k
perl-libs x86_64 4:5.16.3-292.el7 base 688 k
perl-macros x86_64 4:5.16.3-292.el7 base 43 k
perl-parent noarch 1:0.225-244.el7 base 12 k
perl-podlators noarch 2.5.1-3.el7 base 112 k
perl-threads x86_64 1.87-4.el7 base 49 k
perl-threads-shared x86_64 1.43-6.el7 base 39 k
Updating for dependencies:
mariadb-libs x86_64 3:10.1.20-1.el7 centos-openstack-pike 643 k
Transaction Summary
==================================================================================================================================================
Install 3 Packages (+40 Dependent packages)
Upgrade ( 1 Dependent package)
Total download size: 40 M
Downloading packages:
No Presto metadata available for centos-openstack-pike
(1/44): lsof-4.87-4.el7.x86_64.rpm | 331 kB 00:00:00
warning: /var/cache/yum/x86_64/7/centos-openstack-pike/packages/mariadb-common-10.1.20-1.el7.x86_64.rpm: Header V4 RSA/SHA1 Signature, key ID 764429e6: NOKEY
Public key for mariadb-common-10.1.20-1.el7.x86_64.rpm is not installed
(2/44): mariadb-common-10.1.20-1.el7.x86_64.rpm | 63 kB 00:00:02
(3/44): mariadb-config-10.1.20-1.el7.x86_64.rpm | 26 kB 00:00:00
(4/44): mariadb-errmsg-10.1.20-1.el7.x86_64.rpm | 200 kB 00:00:01
(5/44): mariadb-libs-10.1.20-1.el7.x86_64.rpm | 643 kB 00:00:01
(6/44): perl-Carp-1.26-244.el7.noarch.rpm | 19 kB 00:00:00
(7/44): perl-Compress-Raw-Bzip2-2.061-3.el7.x86_64.rpm | 32 kB 00:00:00
(8/44): perl-Compress-Raw-Zlib-2.061-4.el7.x86_64.rpm | 57 kB 00:00:00
(9/44): net-tools-2.0-0.22.20131004git.el7.x86_64.rpm | 305 kB 00:00:00
(10/44): perl-DBD-MySQL-4.023-5.el7.x86_64.rpm | 140 kB 00:00:00
(11/44): perl-Data-Dumper-2.145-3.el7.x86_64.rpm | 47 kB 00:00:00
(12/44): perl-Encode-2.51-7.el7.x86_64.rpm | 1.5 MB 00:00:00
(13/44): perl-Exporter-5.68-3.el7.noarch.rpm | 28 kB 00:00:00
(14/44): perl-File-Path-2.09-2.el7.noarch.rpm | 26 kB 00:00:00
(15/44): perl-File-Temp-0.23.01-3.el7.noarch.rpm | 56 kB 00:00:00
(16/44): perl-Filter-1.49-3.el7.x86_64.rpm | 76 kB 00:00:00
(17/44): perl-Getopt-Long-2.40-2.el7.noarch.rpm | 56 kB 00:00:00
(18/44): perl-HTTP-Tiny-0.033-3.el7.noarch.rpm | 38 kB 00:00:00
(19/44): perl-IO-Compress-2.061-2.el7.noarch.rpm | 260 kB 00:00:00
(20/44): perl-Net-Daemon-0.48-5.el7.noarch.rpm | 51 kB 00:00:00
(21/44): perl-PathTools-3.40-5.el7.x86_64.rpm | 82 kB 00:00:00
(22/44): perl-PlRPC-0.2020-14.el7.noarch.rpm | 36 kB 00:00:00
(23/44): perl-Pod-Escapes-1.04-292.el7.noarch.rpm | 51 kB 00:00:00
(24/44): perl-Pod-Perldoc-3.20-4.el7.noarch.rpm | 87 kB 00:00:00
(25/44): perl-DBI-1.627-4.el7.x86_64.rpm | 802 kB 00:00:02
(26/44): perl-Pod-Usage-1.63-3.el7.noarch.rpm | 27 kB 00:00:00
(27/44): perl-Pod-Simple-3.28-4.el7.noarch.rpm | 216 kB 00:00:00
(28/44): perl-Socket-2.010-4.el7.x86_64.rpm | 49 kB 00:00:00
(29/44): perl-Scalar-List-Utils-1.27-248.el7.x86_64.rpm | 36 kB 00:00:00
(30/44): perl-5.16.3-292.el7.x86_64.rpm | 8.0 MB 00:00:02
(31/44): perl-Text-ParseWords-3.29-4.el7.noarch.rpm | 14 kB 00:00:00
(32/44): perl-Storable-2.45-3.el7.x86_64.rpm | 77 kB 00:00:00
(33/44): perl-Time-Local-1.2300-2.el7.noarch.rpm | 24 kB 00:00:00
(34/44): perl-Time-HiRes-1.9725-3.el7.x86_64.rpm | 45 kB 00:00:00
(35/44): perl-constant-1.27-2.el7.noarch.rpm | 19 kB 00:00:00
(36/44): perl-macros-5.16.3-292.el7.x86_64.rpm | 43 kB 00:00:00
(37/44): perl-parent-0.225-244.el7.noarch.rpm | 12 kB 00:00:00
(38/44): perl-podlators-2.5.1-3.el7.noarch.rpm | 112 kB 00:00:00
(39/44): perl-libs-5.16.3-292.el7.x86_64.rpm | 688 kB 00:00:00
(40/44): perl-threads-1.87-4.el7.x86_64.rpm | 49 kB 00:00:00
(41/44): perl-threads-shared-1.43-6.el7.x86_64.rpm | 39 kB 00:00:00
(42/44): mariadb-10.1.20-1.el7.x86_64.rpm | 6.3 MB 00:00:31
(43/44): python2-PyMySQL-0.7.11-1.el7.noarch.rpm | 150 kB 00:00:00
(44/44): mariadb-server-10.1.20-1.el7.x86_64.rpm | 19 MB 00:00:37
--------------------------------------------------------------------------------------------------------------------------------------------------
Total 956 kB/s | 40 MB 00:00:42
Retrieving key from file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-SIG-Cloud
Importing GPG key 0x764429E6:
Userid : "CentOS Cloud SIG (http://wiki.centos.org/SpecialInterestGroup/Cloud) <[email protected]>"
Fingerprint: 736a f511 6d9c 40e2 af6b 074b f9b9 fee7 7644 29e6
Package : centos-release-openstack-pike-1-1.el7.x86_64 (@extras)
From : /etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-SIG-Cloud
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : 3:mariadb-config-10.1.20-1.el7.x86_64 1/45
Installing : 3:mariadb-common-10.1.20-1.el7.x86_64 2/45
Updating : 3:mariadb-libs-10.1.20-1.el7.x86_64 3/45
Installing : 3:mariadb-errmsg-10.1.20-1.el7.x86_64 4/45
Installing : 1:perl-parent-0.225-244.el7.noarch 5/45
Installing : perl-HTTP-Tiny-0.033-3.el7.noarch 6/45
Installing : perl-podlators-2.5.1-3.el7.noarch 7/45
Installing : perl-Pod-Perldoc-3.20-4.el7.noarch 8/45
Installing : 1:perl-Pod-Escapes-1.04-292.el7.noarch 9/45
Installing : perl-Text-ParseWords-3.29-4.el7.noarch 10/45
Installing : perl-Encode-2.51-7.el7.x86_64 11/45
Installing : perl-Pod-Usage-1.63-3.el7.noarch 12/45
Installing : 4:perl-macros-5.16.3-292.el7.x86_64 13/45
Installing : 4:perl-libs-5.16.3-292.el7.x86_64 14/45
Installing : perl-threads-1.87-4.el7.x86_64 15/45
Installing : 4:perl-Time-HiRes-1.9725-3.el7.x86_64 16/45
Installing : perl-Exporter-5.68-3.el7.noarch 17/45
Installing : perl-constant-1.27-2.el7.noarch 18/45
Installing : perl-Time-Local-1.2300-2.el7.noarch 19/45
Installing : perl-Socket-2.010-4.el7.x86_64 20/45
Installing : perl-Carp-1.26-244.el7.noarch 21/45
Installing : perl-Storable-2.45-3.el7.x86_64 22/45
Installing : perl-Filter-1.49-3.el7.x86_64 23/45
Installing : perl-threads-shared-1.43-6.el7.x86_64 24/45
Installing : perl-File-Path-2.09-2.el7.noarch 25/45
Installing : perl-PathTools-3.40-5.el7.x86_64 26/45
Installing : perl-File-Temp-0.23.01-3.el7.noarch 27/45
Installing : perl-Scalar-List-Utils-1.27-248.el7.x86_64 28/45
Installing : 1:perl-Pod-Simple-3.28-4.el7.noarch 29/45
Installing : perl-Getopt-Long-2.40-2.el7.noarch 30/45
Installing : 4:perl-5.16.3-292.el7.x86_64 31/45
Installing : perl-Data-Dumper-2.145-3.el7.x86_64 32/45
Installing : perl-Compress-Raw-Bzip2-2.061-3.el7.x86_64 33/45
Installing : perl-Net-Daemon-0.48-5.el7.noarch 34/45
Installing : 3:mariadb-10.1.20-1.el7.x86_64 35/45
Installing : 1:perl-Compress-Raw-Zlib-2.061-4.el7.x86_64 36/45
Installing : perl-IO-Compress-2.061-2.el7.noarch 37/45
Installing : perl-PlRPC-0.2020-14.el7.noarch 38/45
Installing : perl-DBI-1.627-4.el7.x86_64 39/45
Installing : perl-DBD-MySQL-4.023-5.el7.x86_64 40/45
Installing : lsof-4.87-4.el7.x86_64 41/45
Installing : net-tools-2.0-0.22.20131004git.el7.x86_64 42/45
Installing : 3:mariadb-server-10.1.20-1.el7.x86_64 43/45
Installing : python2-PyMySQL-0.7.11-1.el7.noarch 44/45
Cleanup : 1:mariadb-libs-5.5.56-2.el7.x86_64 45/45
Verifying : perl-HTTP-Tiny-0.033-3.el7.noarch 1/45
Verifying : 3:mariadb-config-10.1.20-1.el7.x86_64 2/45
Verifying : net-tools-2.0-0.22.20131004git.el7.x86_64 3/45
Verifying : perl-threads-shared-1.43-6.el7.x86_64 4/45
Verifying : 4:perl-Time-HiRes-1.9725-3.el7.x86_64 5/45
Verifying : perl-threads-1.87-4.el7.x86_64 6/45
Verifying : perl-Exporter-5.68-3.el7.noarch 7/45
Verifying : perl-constant-1.27-2.el7.noarch 8/45
Verifying : perl-PathTools-3.40-5.el7.x86_64 9/45
Verifying : 4:perl-macros-5.16.3-292.el7.x86_64 10/45
Verifying : perl-Compress-Raw-Bzip2-2.061-3.el7.x86_64 11/45
Verifying : 1:perl-parent-0.225-244.el7.noarch 12/45
Verifying : perl-Net-Daemon-0.48-5.el7.noarch 13/45
Verifying : 4:perl-5.16.3-292.el7.x86_64 14/45
Verifying : 3:mariadb-libs-10.1.20-1.el7.x86_64 15/45
Verifying : perl-File-Temp-0.23.01-3.el7.noarch 16/45
Verifying : 1:perl-Pod-Simple-3.28-4.el7.noarch 17/45
Verifying : 3:mariadb-10.1.20-1.el7.x86_64 18/45
Verifying : perl-Time-Local-1.2300-2.el7.noarch 19/45
Verifying : 4:perl-libs-5.16.3-292.el7.x86_64 20/45
Verifying : perl-Pod-Perldoc-3.20-4.el7.noarch 21/45
Verifying : perl-DBI-1.627-4.el7.x86_64 22/45
Verifying : perl-Socket-2.010-4.el7.x86_64 23/45
Verifying : perl-Carp-1.26-244.el7.noarch 24/45
Verifying : perl-Data-Dumper-2.145-3.el7.x86_64 25/45
Verifying : perl-Storable-2.45-3.el7.x86_64 26/45
Verifying : python2-PyMySQL-0.7.11-1.el7.noarch 27/45
Verifying : 1:perl-Compress-Raw-Zlib-2.061-4.el7.x86_64 28/45
Verifying : 1:perl-Pod-Escapes-1.04-292.el7.noarch 29/45
Verifying : perl-PlRPC-0.2020-14.el7.noarch 30/45
Verifying : perl-IO-Compress-2.061-2.el7.noarch 31/45
Verifying : perl-Pod-Usage-1.63-3.el7.noarch 32/45
Verifying : perl-DBD-MySQL-4.023-5.el7.x86_64 33/45
Verifying : perl-Encode-2.51-7.el7.x86_64 34/45
Verifying : perl-podlators-2.5.1-3.el7.noarch 35/45
Verifying : perl-Getopt-Long-2.40-2.el7.noarch 36/45
Verifying : 3:mariadb-server-10.1.20-1.el7.x86_64 37/45
Verifying : perl-File-Path-2.09-2.el7.noarch 38/45
Verifying : lsof-4.87-4.el7.x86_64 39/45
Verifying : 3:mariadb-errmsg-10.1.20-1.el7.x86_64 40/45
Verifying : perl-Filter-1.49-3.el7.x86_64 41/45
Verifying : perl-Scalar-List-Utils-1.27-248.el7.x86_64 42/45
Verifying : perl-Text-ParseWords-3.29-4.el7.noarch 43/45
Verifying : 3:mariadb-common-10.1.20-1.el7.x86_64 44/45
Verifying : 1:mariadb-libs-5.5.56-2.el7.x86_64 45/45
Installed:
mariadb.x86_64 3:10.1.20-1.el7 mariadb-server.x86_64 3:10.1.20-1.el7 python2-PyMySQL.noarch 0:0.7.11-1.el7
Dependency Installed:
lsof.x86_64 0:4.87-4.el7 mariadb-common.x86_64 3:10.1.20-1.el7 mariadb-config.x86_64 3:10.1.20-1.el7
mariadb-errmsg.x86_64 3:10.1.20-1.el7 net-tools.x86_64 0:2.0-0.22.20131004git.el7 perl.x86_64 4:5.16.3-292.el7
perl-Carp.noarch 0:1.26-244.el7 perl-Compress-Raw-Bzip2.x86_64 0:2.061-3.el7 perl-Compress-Raw-Zlib.x86_64 1:2.061-4.el7
perl-DBD-MySQL.x86_64 0:4.023-5.el7 perl-DBI.x86_64 0:1.627-4.el7 perl-Data-Dumper.x86_64 0:2.145-3.el7
perl-Encode.x86_64 0:2.51-7.el7 perl-Exporter.noarch 0:5.68-3.el7 perl-File-Path.noarch 0:2.09-2.el7
perl-File-Temp.noarch 0:0.23.01-3.el7 perl-Filter.x86_64 0:1.49-3.el7 perl-Getopt-Long.noarch 0:2.40-2.el7
perl-HTTP-Tiny.noarch 0:0.033-3.el7 perl-IO-Compress.noarch 0:2.061-2.el7 perl-Net-Daemon.noarch 0:0.48-5.el7
perl-PathTools.x86_64 0:3.40-5.el7 perl-PlRPC.noarch 0:0.2020-14.el7 perl-Pod-Escapes.noarch 1:1.04-292.el7
perl-Pod-Perldoc.noarch 0:3.20-4.el7 perl-Pod-Simple.noarch 1:3.28-4.el7 perl-Pod-Usage.noarch 0:1.63-3.el7
perl-Scalar-List-Utils.x86_64 0:1.27-248.el7 perl-Socket.x86_64 0:2.010-4.el7 perl-Storable.x86_64 0:2.45-3.el7
perl-Text-ParseWords.noarch 0:3.29-4.el7 perl-Time-HiRes.x86_64 4:1.9725-3.el7 perl-Time-Local.noarch 0:1.2300-2.el7
perl-constant.noarch 0:1.27-2.el7 perl-libs.x86_64 4:5.16.3-292.el7 perl-macros.x86_64 4:5.16.3-292.el7
perl-parent.noarch 1:0.225-244.el7 perl-podlators.noarch 0:2.5.1-3.el7 perl-threads.x86_64 0:1.87-4.el7
perl-threads-shared.x86_64 0:1.43-6.el7
Dependency Updated:
mariadb-libs.x86_64 3:10.1.20-1.el7
Complete!
Configure
[vagrant@localhost ~]$ IPADDR=10.64.33.64 && echo -e "[mysqld]\nbind-address = $IPADDR\n\ndefault-storage-engine = innodb\ninnodb_file_per_table = on\nmax_connections = 4096\ncollation-server = utf8_general_ci\ncharacter-set-server = utf8" | sudo tee /etc/my.cnf.d/openstack.cnf
[mysqld]
bind-address = 10.64.33.64
default-storage-engine = innodb
innodb_file_per_table = on
max_connections = 4096
collation-server = utf8_general_ci
character-set-server = utf8
[vagrant@localhost ~]$ systemctl is-active mariadb.service
unknown
[vagrant@localhost ~]$ sudo systemctl start mariadb.service
[vagrant@localhost ~]$ systemctl is-active mariadb.service
active
[vagrant@localhost ~]$ systemctl -l status --no-pager mariadb.service
● mariadb.service - MariaDB 10.1 database server
Loaded: loaded (/usr/lib/systemd/system/mariadb.service; disabled; vendor preset: disabled)
Active: active (running) since Fri 2017-10-20 19:41:13 UTC; 1min 7s ago
Process: 22927 ExecStartPost=/usr/libexec/mysql-check-upgrade (code=exited, status=0/SUCCESS)
Process: 22740 ExecStartPre=/usr/libexec/mysql-prepare-db-dir %n (code=exited, status=0/SUCCESS)
Process: 22718 ExecStartPre=/usr/libexec/mysql-check-socket (code=exited, status=0/SUCCESS)
Main PID: 22899 (mysqld)
Status: "Taking your SQL requests now..."
CGroup: /system.slice/mariadb.service
└─22899 /usr/libexec/mysqld --basedir=/usr
[vagrant@localhost ~]$ sudo systemctl enable mariadb.service
Created symlink from /etc/systemd/system/multi-user.target.wants/mariadb.service to /usr/lib/systemd/system/mariadb.service.
Warning: 安装中没有操作root用户口令
Test
[vagrant@localhost ~]$ mysql -u root -e "show databases;"
+--------------------+
| Database |
+--------------------+
| information_schema |
| mysql |
| performance_schema |
| test |
+--------------------+
[vagrant@localhost ~]$ mysql -u root -e "show tables in test;"
[vagrant@localhost ~]$ mysql -u root -e "CREATE TABLE test.test(test varchar(20));"
[vagrant@localhost ~]$ mysql -u root -e "show tables in test;"
+----------------+
| Tables_in_test |
+----------------+
| test |
+----------------+
[vagrant@localhost ~]$ mysql -u root -e "INSERT test.test VALUES ('test');"
[vagrant@localhost ~]$ mysql -u root -e "SELECT * FROM test.test;"
+------+
| test |
+------+
| test |
+------+
[vagrant@localhost ~]$ mysql -u root -e "select host, user from mysql.user;"
+-----------------------+------+
| host | user |
+-----------------------+------+
| 127.0.0.1 | root |
| ::1 | root |
| localhost | |
| localhost | root |
| localhost.localdomain | |
| localhost.localdomain | root |
+-----------------------+------+
Password for root
mysql -u root -e "UPDATE mysql.user SET Password=PASSWORD('$MARIADB_PASS') WHERE User='root';"
消息队列
[vagrant@localhost ~]$ yum search --verbose rabbitmq-server
Loading "fastestmirror" plugin
Config time: 0.004
Yum version: 3.4.3
Setting up Package Sacks
Loading mirror speeds from cached hostfile
* base: mirrors.aliyun.com
* extras: mirrors.aliyun.com
* updates: mirrors.sohu.com
pkgsack time: 0.008
rpmdb time: 0.000
tags time: 0.000
========================================================== N/S matched: rabbitmq-server ==========================================================
rabbitmq-server.noarch : The RabbitMQ server
Repo : centos-openstack-pike
Name and summary matches only, use "search all" for everything.
[vagrant@localhost ~]$ sudo yum install -y rabbitmq-server
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: mirrors.aliyun.com
* extras: mirrors.aliyun.com
* updates: mirrors.sohu.com
Resolving Dependencies
--> Running transaction check
---> Package rabbitmq-server.noarch 0:3.6.5-1.el7 will be installed
--> Processing Dependency: erlang-xmerl >= R12B-3 for package: rabbitmq-server-3.6.5-1.el7.noarch
--> Processing Dependency: erlang-tools >= R12B-3 for package: rabbitmq-server-3.6.5-1.el7.noarch
--> Processing Dependency: erlang-stdlib >= R12B-3 for package: rabbitmq-server-3.6.5-1.el7.noarch
--> Processing Dependency: erlang-ssl >= R12B-3 for package: rabbitmq-server-3.6.5-1.el7.noarch
--> Processing Dependency: erlang-sasl >= R12B-3 for package: rabbitmq-server-3.6.5-1.el7.noarch
--> Processing Dependency: erlang-public_key >= R12B-3 for package: rabbitmq-server-3.6.5-1.el7.noarch
--> Processing Dependency: erlang-os_mon >= R12B-3 for package: rabbitmq-server-3.6.5-1.el7.noarch
--> Processing Dependency: erlang-mnesia >= R12B-3 for package: rabbitmq-server-3.6.5-1.el7.noarch
--> Processing Dependency: erlang-kernel >= R12B-3 for package: rabbitmq-server-3.6.5-1.el7.noarch
--> Processing Dependency: erlang-erts >= R12B-3 for package: rabbitmq-server-3.6.5-1.el7.noarch
--> Processing Dependency: erlang-eldap >= R12B-3 for package: rabbitmq-server-3.6.5-1.el7.noarch
--> Processing Dependency: erlang-sd_notify for package: rabbitmq-server-3.6.5-1.el7.noarch
--> Running transaction check
---> Package erlang-eldap.x86_64 0:18.3.4.4-2.el7 will be installed
--> Processing Dependency: erlang-asn1(x86-64) = 18.3.4.4-2.el7 for package: erlang-eldap-18.3.4.4-2.el7.x86_64
---> Package erlang-erts.x86_64 0:18.3.4.4-2.el7 will be installed
--> Processing Dependency: lksctp-tools for package: erlang-erts-18.3.4.4-2.el7.x86_64
---> Package erlang-kernel.x86_64 0:18.3.4.4-2.el7 will be installed
---> Package erlang-mnesia.x86_64 0:18.3.4.4-2.el7 will be installed
---> Package erlang-os_mon.x86_64 0:18.3.4.4-2.el7 will be installed
--> Processing Dependency: erlang-snmp(x86-64) = 18.3.4.4-2.el7 for package: erlang-os_mon-18.3.4.4-2.el7.x86_64
--> Processing Dependency: erlang-otp_mibs(x86-64) = 18.3.4.4-2.el7 for package: erlang-os_mon-18.3.4.4-2.el7.x86_64
---> Package erlang-public_key.x86_64 0:18.3.4.4-2.el7 will be installed
--> Processing Dependency: erlang-crypto(x86-64) = 18.3.4.4-2.el7 for package: erlang-public_key-18.3.4.4-2.el7.x86_64
---> Package erlang-sasl.x86_64 0:18.3.4.4-2.el7 will be installed
---> Package erlang-sd_notify.x86_64 0:0.1-9.el7 will be installed
---> Package erlang-ssl.x86_64 0:18.3.4.4-2.el7 will be installed
--> Processing Dependency: erlang-inets(x86-64) = 18.3.4.4-2.el7 for package: erlang-ssl-18.3.4.4-2.el7.x86_64
---> Package erlang-stdlib.x86_64 0:18.3.4.4-2.el7 will be installed
--> Processing Dependency: erlang-compiler(x86-64) = 18.3.4.4-2.el7 for package: erlang-stdlib-18.3.4.4-2.el7.x86_64
---> Package erlang-tools.x86_64 0:18.3.4.4-2.el7 will be installed
--> Processing Dependency: erlang-runtime_tools(x86-64) = 18.3.4.4-2.el7 for package: erlang-tools-18.3.4.4-2.el7.x86_64
---> Package erlang-xmerl.x86_64 0:18.3.4.4-2.el7 will be installed
--> Running transaction check
---> Package erlang-asn1.x86_64 0:18.3.4.4-2.el7 will be installed
---> Package erlang-compiler.x86_64 0:18.3.4.4-2.el7 will be installed
--> Processing Dependency: erlang-hipe(x86-64) = 18.3.4.4-2.el7 for package: erlang-compiler-18.3.4.4-2.el7.x86_64
---> Package erlang-crypto.x86_64 0:18.3.4.4-2.el7 will be installed
---> Package erlang-inets.x86_64 0:18.3.4.4-2.el7 will be installed
---> Package erlang-otp_mibs.x86_64 0:18.3.4.4-2.el7 will be installed
---> Package erlang-runtime_tools.x86_64 0:18.3.4.4-2.el7 will be installed
---> Package erlang-snmp.x86_64 0:18.3.4.4-2.el7 will be installed
---> Package lksctp-tools.x86_64 0:1.0.17-2.el7 will be installed
--> Running transaction check
---> Package erlang-hipe.x86_64 0:18.3.4.4-2.el7 will be installed
--> Processing Dependency: erlang-syntax_tools(x86-64) = 18.3.4.4-2.el7 for package: erlang-hipe-18.3.4.4-2.el7.x86_64
--> Running transaction check
---> Package erlang-syntax_tools.x86_64 0:18.3.4.4-2.el7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
==================================================================================================================================================
Package Arch Version Repository Size
==================================================================================================================================================
Installing:
rabbitmq-server noarch 3.6.5-1.el7 centos-openstack-pike 5.1 M
Installing for dependencies:
erlang-asn1 x86_64 18.3.4.4-2.el7 centos-openstack-pike 736 k
erlang-compiler x86_64 18.3.4.4-2.el7 centos-openstack-pike 1.1 M
erlang-crypto x86_64 18.3.4.4-2.el7 centos-openstack-pike 129 k
erlang-eldap x86_64 18.3.4.4-2.el7 centos-openstack-pike 117 k
erlang-erts x86_64 18.3.4.4-2.el7 centos-openstack-pike 2.8 M
erlang-hipe x86_64 18.3.4.4-2.el7 centos-openstack-pike 2.6 M
erlang-inets x86_64 18.3.4.4-2.el7 centos-openstack-pike 786 k
erlang-kernel x86_64 18.3.4.4-2.el7 centos-openstack-pike 1.1 M
erlang-mnesia x86_64 18.3.4.4-2.el7 centos-openstack-pike 712 k
erlang-os_mon x86_64 18.3.4.4-2.el7 centos-openstack-pike 115 k
erlang-otp_mibs x86_64 18.3.4.4-2.el7 centos-openstack-pike 35 k
erlang-public_key x86_64 18.3.4.4-2.el7 centos-openstack-pike 571 k
erlang-runtime_tools x86_64 18.3.4.4-2.el7 centos-openstack-pike 191 k
erlang-sasl x86_64 18.3.4.4-2.el7 centos-openstack-pike 298 k
erlang-sd_notify x86_64 0.1-9.el7 centos-openstack-pike 8.8 k
erlang-snmp x86_64 18.3.4.4-2.el7 centos-openstack-pike 1.6 M
erlang-ssl x86_64 18.3.4.4-2.el7 centos-openstack-pike 702 k
erlang-stdlib x86_64 18.3.4.4-2.el7 centos-openstack-pike 2.4 M
erlang-syntax_tools x86_64 18.3.4.4-2.el7 centos-openstack-pike 382 k
erlang-tools x86_64 18.3.4.4-2.el7 centos-openstack-pike 584 k
erlang-xmerl x86_64 18.3.4.4-2.el7 centos-openstack-pike 993 k
lksctp-tools x86_64 1.0.17-2.el7 base 88 k
Transaction Summary
==================================================================================================================================================
Install 1 Package (+22 Dependent packages)
Total download size: 23 M
Installed size: 39 M
Downloading packages:
(1/23): erlang-asn1-18.3.4.4-2.el7.x86_64.rpm | 736 kB 00:00:03
(2/23): erlang-crypto-18.3.4.4-2.el7.x86_64.rpm | 129 kB 00:00:00
(3/23): erlang-eldap-18.3.4.4-2.el7.x86_64.rpm | 117 kB 00:00:01
(4/23): erlang-compiler-18.3.4.4-2.el7.x86_64.rpm | 1.1 MB 00:00:06
(5/23): erlang-hipe-18.3.4.4-2.el7.x86_64.rpm | 2.6 MB 00:00:08
(6/23): erlang-erts-18.3.4.4-2.el7.x86_64.rpm | 2.8 MB 00:00:09
(7/23): erlang-inets-18.3.4.4-2.el7.x86_64.rpm | 786 kB 00:00:02
(8/23): erlang-mnesia-18.3.4.4-2.el7.x86_64.rpm | 712 kB 00:00:03
(9/23): erlang-kernel-18.3.4.4-2.el7.x86_64.rpm | 1.1 MB 00:00:05
(10/23): erlang-otp_mibs-18.3.4.4-2.el7.x86_64.rpm | 35 kB 00:00:00
(11/23): erlang-os_mon-18.3.4.4-2.el7.x86_64.rpm | 115 kB 00:00:00
(12/23): erlang-public_key-18.3.4.4-2.el7.x86_64.rpm | 571 kB 00:00:02
(13/23): erlang-runtime_tools-18.3.4.4-2.el7.x86_64.rpm | 191 kB 00:00:03
(14/23): erlang-sd_notify-0.1-9.el7.x86_64.rpm | 8.8 kB 00:00:00
(15/23): erlang-sasl-18.3.4.4-2.el7.x86_64.rpm | 298 kB 00:00:01
(16/23): erlang-ssl-18.3.4.4-2.el7.x86_64.rpm | 702 kB 00:00:02
(17/23): erlang-stdlib-18.3.4.4-2.el7.x86_64.rpm | 2.4 MB 00:00:07
(18/23): erlang-snmp-18.3.4.4-2.el7.x86_64.rpm | 1.6 MB 00:00:10
(19/23): erlang-syntax_tools-18.3.4.4-2.el7.x86_64.rpm | 382 kB 00:00:01
(20/23): lksctp-tools-1.0.17-2.el7.x86_64.rpm | 88 kB 00:00:00
(21/23): erlang-tools-18.3.4.4-2.el7.x86_64.rpm | 584 kB 00:00:02
(22/23): erlang-xmerl-18.3.4.4-2.el7.x86_64.rpm | 993 kB 00:00:03
(23/23): rabbitmq-server-3.6.5-1.el7.noarch.rpm | 5.1 MB 00:00:12
--------------------------------------------------------------------------------------------------------------------------------------------------
Total 464 kB/s | 23 MB 00:00:50
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : lksctp-tools-1.0.17-2.el7.x86_64 1/23
Installing : erlang-kernel-18.3.4.4-2.el7.x86_64 2/23
Installing : erlang-crypto-18.3.4.4-2.el7.x86_64 3/23
Installing : erlang-erts-18.3.4.4-2.el7.x86_64 4/23
Installing : erlang-stdlib-18.3.4.4-2.el7.x86_64 5/23
Installing : erlang-syntax_tools-18.3.4.4-2.el7.x86_64 6/23
Installing : erlang-compiler-18.3.4.4-2.el7.x86_64 7/23
Installing : erlang-hipe-18.3.4.4-2.el7.x86_64 8/23
Installing : erlang-mnesia-18.3.4.4-2.el7.x86_64 9/23
Installing : erlang-runtime_tools-18.3.4.4-2.el7.x86_64 10/23
Installing : erlang-snmp-18.3.4.4-2.el7.x86_64 11/23
Installing : erlang-asn1-18.3.4.4-2.el7.x86_64 12/23
Installing : erlang-public_key-18.3.4.4-2.el7.x86_64 13/23
Installing : erlang-ssl-18.3.4.4-2.el7.x86_64 14/23
Installing : erlang-inets-18.3.4.4-2.el7.x86_64 15/23
Installing : erlang-tools-18.3.4.4-2.el7.x86_64 16/23
Installing : erlang-sasl-18.3.4.4-2.el7.x86_64 17/23
Installing : erlang-eldap-18.3.4.4-2.el7.x86_64 18/23
Installing : erlang-otp_mibs-18.3.4.4-2.el7.x86_64 19/23
Installing : erlang-os_mon-18.3.4.4-2.el7.x86_64 20/23
Installing : erlang-xmerl-18.3.4.4-2.el7.x86_64 21/23
Installing : erlang-sd_notify-0.1-9.el7.x86_64 22/23
Installing : rabbitmq-server-3.6.5-1.el7.noarch 23/23
Verifying : erlang-eldap-18.3.4.4-2.el7.x86_64 1/23
Verifying : rabbitmq-server-3.6.5-1.el7.noarch 2/23
Verifying : erlang-mnesia-18.3.4.4-2.el7.x86_64 3/23
Verifying : erlang-hipe-18.3.4.4-2.el7.x86_64 4/23
Verifying : erlang-kernel-18.3.4.4-2.el7.x86_64 5/23
Verifying : erlang-otp_mibs-18.3.4.4-2.el7.x86_64 6/23
Verifying : erlang-crypto-18.3.4.4-2.el7.x86_64 7/23
Verifying : erlang-xmerl-18.3.4.4-2.el7.x86_64 8/23
Verifying : erlang-stdlib-18.3.4.4-2.el7.x86_64 9/23
Verifying : erlang-sasl-18.3.4.4-2.el7.x86_64 10/23
Verifying : lksctp-tools-1.0.17-2.el7.x86_64 11/23
Verifying : erlang-tools-18.3.4.4-2.el7.x86_64 12/23
Verifying : erlang-snmp-18.3.4.4-2.el7.x86_64 13/23
Verifying : erlang-sd_notify-0.1-9.el7.x86_64 14/23
Verifying : erlang-compiler-18.3.4.4-2.el7.x86_64 15/23
Verifying : erlang-ssl-18.3.4.4-2.el7.x86_64 16/23
Verifying : erlang-erts-18.3.4.4-2.el7.x86_64 17/23
Verifying : erlang-public_key-18.3.4.4-2.el7.x86_64 18/23
Verifying : erlang-runtime_tools-18.3.4.4-2.el7.x86_64 19/23
Verifying : erlang-syntax_tools-18.3.4.4-2.el7.x86_64 20/23
Verifying : erlang-os_mon-18.3.4.4-2.el7.x86_64 21/23
Verifying : erlang-asn1-18.3.4.4-2.el7.x86_64 22/23
Verifying : erlang-inets-18.3.4.4-2.el7.x86_64 23/23
Installed:
rabbitmq-server.noarch 0:3.6.5-1.el7
Dependency Installed:
erlang-asn1.x86_64 0:18.3.4.4-2.el7 erlang-compiler.x86_64 0:18.3.4.4-2.el7 erlang-crypto.x86_64 0:18.3.4.4-2.el7
erlang-eldap.x86_64 0:18.3.4.4-2.el7 erlang-erts.x86_64 0:18.3.4.4-2.el7 erlang-hipe.x86_64 0:18.3.4.4-2.el7
erlang-inets.x86_64 0:18.3.4.4-2.el7 erlang-kernel.x86_64 0:18.3.4.4-2.el7 erlang-mnesia.x86_64 0:18.3.4.4-2.el7
erlang-os_mon.x86_64 0:18.3.4.4-2.el7 erlang-otp_mibs.x86_64 0:18.3.4.4-2.el7 erlang-public_key.x86_64 0:18.3.4.4-2.el7
erlang-runtime_tools.x86_64 0:18.3.4.4-2.el7 erlang-sasl.x86_64 0:18.3.4.4-2.el7 erlang-sd_notify.x86_64 0:0.1-9.el7
erlang-snmp.x86_64 0:18.3.4.4-2.el7 erlang-ssl.x86_64 0:18.3.4.4-2.el7 erlang-stdlib.x86_64 0:18.3.4.4-2.el7
erlang-syntax_tools.x86_64 0:18.3.4.4-2.el7 erlang-tools.x86_64 0:18.3.4.4-2.el7 erlang-xmerl.x86_64 0:18.3.4.4-2.el7
lksctp-tools.x86_64 0:1.0.17-2.el7
Complete!
Start
[vagrant@localhost ~]$ [ 'unknown' == $(systemctl is-active rabbitmq-server.service) ] && sudo systemctl start rabbitmq-server.service
Auto-Start
[vagrant@localhost ~]$ [ 'active' == $(systemctl is-active rabbitmq-server.service) ] && sudo systemctl enable rabbitmq-server.service
Created symlink from /etc/systemd/system/multi-user.target.wants/rabbitmq-server.service to /usr/lib/systemd/system/rabbitmq-server.service.
[vagrant@localhost ~]$ systemctl -l status --no-pager rabbitmq-server.service
● rabbitmq-server.service - RabbitMQ broker
Loaded: loaded (/usr/lib/systemd/system/rabbitmq-server.service; disabled; vendor preset: disabled)
Active: active (running) since Fri 2017-10-20 20:22:22 UTC; 43s ago
Main PID: 23134 (beam)
Status: "Initialized"
CGroup: /system.slice/rabbitmq-server.service
├─23134 /usr/lib64/erlang/erts-7.3.1.2/bin/beam -W w -A 64 -P 1048576 -t 5000000 -stbt db -K true -- -root /usr/lib64/erlang -progname erl -- -home /var/lib/rabbitmq -- -pa /usr/lib/rabbitmq/lib/rabbitmq_server-3.6.5/ebin -noshell -noinput -s rabbit boot -sname rabbit@localhost -boot start_sasl -config /etc/rabbitmq/rabbitmq -kernel inet_default_connect_options [{nodelay,true}] -sasl errlog_type error -sasl sasl_error_logger false -rabbit error_logger {file,"/var/log/rabbitmq/[email protected]"} -rabbit sasl_error_logger {file,"/var/log/rabbitmq/[email protected]"} -rabbit enabled_plugins_file "/etc/rabbitmq/enabled_plugins" -rabbit plugins_dir "/usr/lib/rabbitmq/lib/rabbitmq_server-3.6.5/plugins" -rabbit plugins_expand_dir "/var/lib/rabbitmq/mnesia/rabbit@localhost-plugins-expand" -os_mon start_cpu_sup false -os_mon start_disksup false -os_mon start_memsup false -mnesia dir "/var/lib/rabbitmq/mnesia/rabbit@localhost" -kernel inet_dist_listen_min 25672 -kernel inet_dist_listen_max 25672
├─23310 inet_gethost 4
└─23311 inet_gethost 4
Oct 20 20:22:21 localhost.localdomain systemd[1]: Starting RabbitMQ broker...
Oct 20 20:22:21 localhost.localdomain rabbitmq-server[23134]: RabbitMQ 3.6.5. Copyright (C) 2007-2016 Pivotal Software, Inc.
Oct 20 20:22:21 localhost.localdomain rabbitmq-server[23134]: ## ## Licensed under the MPL. See http://www.rabbitmq.com/
Oct 20 20:22:21 localhost.localdomain rabbitmq-server[23134]: ## ##
Oct 20 20:22:21 localhost.localdomain rabbitmq-server[23134]: ########## Logs: /var/log/rabbitmq/[email protected]
Oct 20 20:22:21 localhost.localdomain rabbitmq-server[23134]: ###### ## /var/log/rabbitmq/[email protected]
Oct 20 20:22:21 localhost.localdomain rabbitmq-server[23134]: ##########
Oct 20 20:22:21 localhost.localdomain rabbitmq-server[23134]: Starting broker...
Oct 20 20:22:22 localhost.localdomain systemd[1]: Started RabbitMQ broker.
Oct 20 20:22:22 localhost.localdomain rabbitmq-server[23134]: completed with 0 plugins.
[vagrant@localhost ~]$ sudo rabbitmqctl status
Status of node rabbit@localhost ...
[{pid,23134},
{running_applications,[{rabbit,"RabbitMQ","3.6.5"},
{mnesia,"MNESIA CXC 138 12","4.13.4"},
{os_mon,"CPO CXC 138 46","2.4"},
{ranch,"Socket acceptor pool for TCP protocols.",
"1.2.1"},
{rabbit_common,[],"3.6.5"},
{xmerl,"XML parser","1.3.10"},
{sasl,"SASL CXC 138 11","2.7"},
{stdlib,"ERTS CXC 138 10","2.8"},
{kernel,"ERTS CXC 138 10","4.2"}]},
{os,{unix,linux}},
{erlang_version,"Erlang/OTP 18 [erts-7.3.1.2] [source] [64-bit] [async-threads:64] [hipe] [kernel-poll:true]\n"},
{memory,[{total,43675752},
{connection_readers,0},
{connection_writers,0},
{connection_channels,0},
{connection_other,0},
{queue_procs,2680},
{queue_slave_procs,0},
{plugins,0},
{other_proc,18491544},
{mnesia,58168},
{mgmt_db,0},
{msg_index,49744},
{other_ets,902960},
{binary,19080},
{code,19689812},
{atom,719761},
{other_system,3742003}]},
{alarms,[]},
{listeners,[{clustering,25672,"::"},{amqp,5672,"::"}]},
{vm_memory_high_watermark,0.4},
{vm_memory_limit,771506176},
{disk_free_limit,50000000},
{disk_free,38832476160},
{file_descriptors,[{total_limit,924},
{total_used,2},
{sockets_limit,829},
{sockets_used,0}]},
{processes,[{limit,1048576},{used,137}]},
{run_queue,0},
{uptime,173},
{kernel,{net_ticktime,60}}]
[vagrant@localhost ~]$ sudo rabbitmqctl add_user openstack RABBIT_PASS && sudo rabbitmqctl set_permissions openstack ".*" ".*" ".*"
Creating user "openstack" ...
Setting permissions for user "openstack" in vhost "/" ...
[vagrant@localhost ~]$ sudo rabbitmqctl list_users && sudo rabbitmqctl list_user_permissions openstack
Listing users ...
openstack []
guest [administrator]
Listing permissions for user "openstack" ...
/ .* .* .*
缓存
[vagrant@localhost ~]$ yum list | egrep '^memcached\.'
memcached.x86_64 1.4.39-1.el7 centos-openstack-pike
Install
[vagrant@localhost ~]$ sudo yum install -y memcached
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: mirrors.aliyun.com
* extras: mirrors.aliyun.com
* updates: mirrors.sohu.com
Resolving Dependencies
--> Running transaction check
---> Package memcached.x86_64 0:1.4.39-1.el7 will be installed
--> Finished Dependency Resolution
Dependencies Resolved
==================================================================================================================================================
Package Arch Version Repository Size
==================================================================================================================================================
Installing:
memcached x86_64 1.4.39-1.el7 centos-openstack-pike 118 k
Transaction Summary
==================================================================================================================================================
Install 1 Package
Total download size: 118 k
Installed size: 255 k
Downloading packages:
memcached-1.4.39-1.el7.x86_64.rpm | 118 kB 00:00:01
Running transaction check
Running transaction test
Transaction test succeeded
Running transaction
Installing : memcached-1.4.39-1.el7.x86_64 1/1
Verifying : memcached-1.4.39-1.el7.x86_64 1/1
Installed:
memcached.x86_64 0:1.4.39-1.el7
Complete!
Configure
Backup
[vagrant@localhost ~]$ sudo cp /etc/sysconfig/memcached etc0x2Fsysconfig0x2Fmemcached
Sed
[vagrant@localhost ~]$ sudo sed 's/^\(OPTIONS="-l.*\)"$/\1,${controller}"/' etc0x2Fsysconfig0x2Fmemcached | env controller=10.64.33.64 envsubst > memcached
Detail
[vagrant@localhost ~]$ sudo cat memcached
PORT="11211"
USER="memcached"
MAXCONN="1024"
CACHESIZE="64"
OPTIONS="-l 127.0.0.1,::1,10.64.33.64"
Modify
[vagrant@localhost ~]$ sudo cp memcached /etc/sysconfig/memcached
Run
Start and enbale Auto-Start when reboot
[vagrant@localhost ~]$ sudo systemctl start memcached.service && sudo systemctl enable memcached.service
Created symlink from /etc/systemd/system/multi-user.target.wants/memcached.service to /usr/lib/systemd/system/memcached.service.
Check
[vagrant@localhost ~]$ systemctl -l status --no-pager memcached.service
● memcached.service - memcached daemon
Loaded: loaded (/usr/lib/systemd/system/memcached.service; enabled; vendor preset: disabled)
Active: active (running) since Fri 2017-10-20 20:37:22 UTC; 13s ago
Main PID: 25037 (memcached)
CGroup: /system.slice/memcached.service
└─25037 /usr/bin/memcached -p 11211 -u memcached -m 64 -c 1024 -l 127.0.0.1,::1