esp32-ble-uart-hybrid-example.yaml

substitutions:
  name: jk-bms
  device_description: "Monitor a JK-BMS via UART-TTL and control via BLE"
  external_components_source: github://syssi/esphome-jk-bms@main

  # BLE settings
  mac_address: C8:47:8C:E1:E2:AA
  # Please use "JK02_24S" if you own a old JK-BMS < hardware version 11.0 (hardware version >= 6.0 and < 11.0)
  # Please use "JK02_32S" if you own a new JK-BMS >= hardware version 11.0 (f.e. JK-B2A8S20P hw 11.XW, sw 11.26)
  # Please use "JK04" if you have some old JK-BMS <= hardware version 3.0 (f.e. JK-B2A16S hw 3.0, sw. 3.3.0)
  protocol_version: JK02_32S

  # UART settings
  tx_pin: GPIO16
  rx_pin: GPIO17

esphome:
  name: ${name}
  comment: ${device_description}
  min_version: 2024.6.0
  project:
    name: "syssi.esphome-jk-bms"
    version: 2.1.0

esp32:
  board: wemos_d1_mini32
  framework:
    type: esp-idf

external_components:
  - source: ${external_components_source}
    refresh: 0s

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

ota:
  platform: esphome
  on_begin:
    then:
      - switch.turn_off: ble_client_switch0
      - logger.log: "BLE connection suspended for OTA update"

logger:
  level: DEBUG
  logs:
    esp32_ble_tracker: INFO
    esp32_ble_client: INFO

# If you use Home Assistant please remove this `mqtt` section and uncomment the `api` component!
# The native API has many advantages over MQTT: https://esphome.io/components/api.html#advantages-over-mqtt
mqtt:
  broker: !secret mqtt_host
  username: !secret mqtt_username
  password: !secret mqtt_password
  id: mqtt_client

# api:

esp32_ble_tracker:
  scan_parameters:
    active: false

ble_client:
  - mac_address: ${mac_address}
    id: client0

jk_bms_ble:
  - ble_client_id: client0
    protocol_version: ${protocol_version}
    throttle: 10s
    id: bmsble0

uart:
  - id: uart_0
    baud_rate: 115200
    rx_buffer_size: 384
    tx_pin: ${tx_pin}
    rx_pin: ${rx_pin}

jk_modbus:
  - id: modbus0
    uart_id: uart_0
    rx_timeout: 50ms

jk_bms:
  - id: bms0
    jk_modbus_id: modbus0
    update_interval: 5s

binary_sensor:
  - platform: jk_bms
    jk_bms_id: bms0
    balancing:
      name: "${name} balancing"
    balancing_switch:
      name: "${name} balancing switch"
    charging:
      name: "${name} charging"
    discharging:
      name: "${name} discharging"
    dedicated_charger_switch:
      name: "${name} dedicated charger switch"

button:
  - platform: jk_bms_ble
    jk_bms_ble_id: bmsble0
    retrieve_settings:
      name: "${name} retrieve settings"
    retrieve_device_info:
      name: "${name} retrieve device info"

number:
  - platform: jk_bms_ble
    jk_bms_ble_id: bmsble0
    balance_trigger_voltage:
      name: "${name} balance trigger voltage"
    balance_starting_voltage:
      name: "${name} balance starting voltage"
    power_off_voltage:
      name: "${name} power off voltage"
    max_balance_current:
      name: "${name} max balance current"

sensor:
  - platform: jk_bms
    jk_bms_id: bms0
    min_cell_voltage:
      name: "${name} min cell voltage"
    max_cell_voltage:
      name: "${name} max cell voltage"
    min_voltage_cell:
      name: "${name} min voltage cell"
    max_voltage_cell:
      name: "${name} max voltage cell"
    delta_cell_voltage:
      name: "${name} delta cell voltage"
    average_cell_voltage:
      name: "${name} average cell voltage"
    cell_voltage_1:
      name: "${name} cell voltage 1"
    cell_voltage_2:
      name: "${name} cell voltage 2"
    cell_voltage_3:
      name: "${name} cell voltage 3"
    cell_voltage_4:
      name: "${name} cell voltage 4"
    cell_voltage_5:
      name: "${name} cell voltage 5"
    cell_voltage_6:
      name: "${name} cell voltage 6"
    cell_voltage_7:
      name: "${name} cell voltage 7"
    cell_voltage_8:
      name: "${name} cell voltage 8"
    cell_voltage_9:
      name: "${name} cell voltage 9"
    cell_voltage_10:
      name: "${name} cell voltage 10"
    cell_voltage_11:
      name: "${name} cell voltage 11"
    cell_voltage_12:
      name: "${name} cell voltage 12"
    cell_voltage_13:
      name: "${name} cell voltage 13"
    cell_voltage_14:
      name: "${name} cell voltage 14"
    cell_voltage_15:
      name: "${name} cell voltage 15"
    cell_voltage_16:
      name: "${name} cell voltage 16"
    power_tube_temperature:
      name: "${name} power tube temperature"
    temperature_sensor_1:
      name: "${name} temperature sensor 1"
    temperature_sensor_2:
      name: "${name} temperature sensor 2"
    total_voltage:
      name: "${name} total voltage"
    current:
      name: "${name} current"
    power:
      name: "${name} power"
    charging_power:
      name: "${name} charging power"
    discharging_power:
      name: "${name} discharging power"
    capacity_remaining:
      name: "${name} capacity remaining"
    capacity_remaining_derived:
      name: "${name} capacity remaining derived"
    errors_bitmask:
      name: "${name} errors bitmask"
    operation_mode_bitmask:
      name: "${name} operation mode bitmask"
    total_runtime:
      name: "${name} total runtime"

switch:
  - platform: jk_bms_ble
    jk_bms_ble_id: bmsble0
    charging:
      name: "${name} charging"
    discharging:
      name: "${name} discharging"
    balancer:
      name: "${name} balancer"

  - platform: ble_client
    ble_client_id: client0
    id: ble_client_switch0
    name: "${name} enable bluetooth connection"

text_sensor:
  - platform: jk_bms
    jk_bms_id: bms0
    errors:
      name: "${name} errors"
    operation_mode:
      name: "${name} operation mode"
    total_runtime_formatted:
      name: "${name} total runtime formatted"