diff --git a/.github/.wordlist.txt b/.github/.wordlist.txt
index 25c9ef8daa6594..ecfcb937e5b986 100644
--- a/.github/.wordlist.txt
+++ b/.github/.wordlist.txt
@@ -402,6 +402,7 @@ DevKitM
devtype
df
dfe
+DFILE
dfu
DgDxsfHx
dhclient
@@ -1354,6 +1355,7 @@ SVR
SWD
SWU
symlinks
+sysbuild
sysconfdir
SysConfig
sysctl
diff --git a/examples/all-clusters-app/nrfconnect/README.md b/examples/all-clusters-app/nrfconnect/README.md
index 18df16f5e11654..3a58e448d76254 100644
--- a/examples/all-clusters-app/nrfconnect/README.md
+++ b/examples/all-clusters-app/nrfconnect/README.md
@@ -1,5 +1,21 @@
# Matter nRF Connect All Clusters Example Application
+> **Note:** This example is intended only to perform smoke tests of a Matter
+> solution integrated with nRF Connect SDK platform. The example quality is not
+> production ready and it may contain minor bugs or use not optimal
+> configuration. It is not recommended to use this example as a basis for
+> creating a market ready product.
+>
+> For the production ready and optimized Matter samples, see
+> [nRF Connect SDK samples](https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/samples/matter.html).
+> The Matter samples in nRF Connect SDK use various additional software
+> components and provide multiple optional features that improve the developer
+> and user experience. To read more about it, see
+> [Matter support in nRF Connect SDK](https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/protocols/matter/index.html#ug-matter)
+> page. Using Matter samples from nRF Connect SDK allows you to get a full
+> Nordic technical support via [DevZone](https://devzone.nordicsemi.com/)
+> portal.
+
The nRF All Clusters Example Application implements various ZCL clusters
populated on three endpoints. You can use this example as a reference for
creating your own application.
@@ -85,10 +101,10 @@ The example supports building and running on the following devices:
| Hardware platform | Build target | Platform image |
| ------------------------------------------------------------------------------------------------- | -------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------- |
-| [nRF52840 DK](https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-DK) | `nrf52840dk_nrf52840` | nRF52840 DK
nRF5340 DK
nRF52840 Dongle
nRF7002 DK
nRF52840 DK
nRF5340 DK
nRF52840 Dongle
nRF7002 DK
@@ -97,9 +113,9 @@ The example supports building and running on the following devices:
The development kits for this sample offer the following IPv6 network support
for Matter:
-- Matter over Thread is supported for `nrf52840dk_nrf52840` and
- `nrf5340dk_nrf5340_cpuapp`.
-- Matter over Wi-Fi is supported for `nrf7002dk_nrf5340_cpuapp`.
+- Matter over Thread is supported for `nrf52840dk/nrf52840` and
+ `nrf5340dk/nrf5340/cpuapp`.
+- Matter over Wi-Fi is supported for `nrf7002dk/nrf5340/cpuapp`.
## Device UI
@@ -248,14 +264,15 @@ Complete the following steps to build the sample:
2. Run the following command to build the example, with _build-target_ replaced
with the build target name of the Nordic Semiconductor's kit you own, for
- example `nrf52840dk_nrf52840`:
+ example `nrf52840dk/nrf52840`:
- $ west build -b build-target
+ $ west build -b build-target --sysbuild
You only need to specify the build target on the first build. See
[Requirements](#requirements) for the build target names of compatible kits.
-The output `zephyr.hex` file will be available in the `build/zephyr/` directory.
+The output `zephyr.hex` file will be available in the `build/nrfconnect/zephyr/`
+directory.
### Removing build artifacts
@@ -270,7 +287,7 @@ following command:
To build the example with release configuration that disables the diagnostic
features like logs and command-line interface, run the following command:
- $ west build -b build-target -- -DCONF_FILE=prj_release.conf
+ $ west build -b build-target --sysbuild -- -DFILE_SUFFIX=release
Remember to replace _build-target_ with the build target name of the Nordic
Semiconductor's kit you own.
@@ -281,9 +298,9 @@ Support for DFU using Matter OTA is disabled by default.
To build the example with configuration that supports DFU, run the following
command with _build-target_ replaced with the build target name of the Nordic
-Semiconductor kit you are using (for example `nrf52840dk_nrf52840`):
+Semiconductor kit you are using (for example `nrf52840dk/nrf52840`):
- $ west build -b build-target -- -DCONF_FILE=prj_dfu.conf
+ $ west build -b build-target --sysbuild -- -DFILE_SUFFIX=dfu
> **Note**:
>
@@ -299,7 +316,7 @@ Semiconductor kit you are using (for example `nrf52840dk_nrf52840`):
#### Changing bootloader configuration
To change the default MCUboot configuration, edit the `prj.conf` file located in
-the `child_image/mcuboot` directory.
+the `sysbuild/mcuboot` directory.
#### Changing flash memory settings
@@ -311,8 +328,9 @@ purposes. You can change these settings by defining
This example uses this option to define using an external flash.
To modify the flash settings of your board (that is, your _build-target_, for
-example `nrf52840dk_nrf52840`), edit the `pm_static_dfu.yml` file located in the
-`configuration/build-target/` directory.
+example `nrf52840dk/nrf52840`), edit the `pm_static_.yml` file
+(for example `pm_static_nrf52840dk_nrf52840.yml`), located in the main
+application directory.
@@ -324,7 +342,7 @@ using the menuconfig utility.
To open the menuconfig utility, run the following command from the example
directory:
- $ west build -b build-target -t menuconfig
+ $ west build -b build-target --sysbuild -t menuconfig
Remember to replace _build-target_ with the build target name of the Nordic
Semiconductor's kit you own.
diff --git a/examples/all-clusters-minimal-app/nrfconnect/README.md b/examples/all-clusters-minimal-app/nrfconnect/README.md
index a015c7a61ed115..932db10a2f2c89 100644
--- a/examples/all-clusters-minimal-app/nrfconnect/README.md
+++ b/examples/all-clusters-minimal-app/nrfconnect/README.md
@@ -1,5 +1,21 @@
# Matter nRF Connect All Clusters Example Application
+> **Note:** This example is intended only to perform smoke tests of a Matter
+> solution integrated with nRF Connect SDK platform. The example quality is not
+> production ready and it may contain minor bugs or use not optimal
+> configuration. It is not recommended to use this example as a basis for
+> creating a market ready product.
+>
+> For the production ready and optimized Matter samples, see
+> [nRF Connect SDK samples](https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/samples/matter.html).
+> The Matter samples in nRF Connect SDK use various additional software
+> components and provide multiple optional features that improve the developer
+> and user experience. To read more about it, see
+> [Matter support in nRF Connect SDK](https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/protocols/matter/index.html#ug-matter)
+> page. Using Matter samples from nRF Connect SDK allows you to get a full
+> Nordic technical support via [DevZone](https://devzone.nordicsemi.com/)
+> portal.
+
The nRF All Clusters Example Application implements various ZCL clusters
populated on three endpoints. You can use this example as a reference for
creating your own application.
@@ -77,9 +93,9 @@ The example supports building and running on the following devices:
| Hardware platform | Build target | Platform image |
| ------------------------------------------------------------------------------------------------- | -------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------- |
-| [nRF52840 DK](https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-DK) | `nrf52840dk_nrf52840` | nRF52840 DK
nRF5340 DK
nRF52840 Dongle
nRF52840 DK
nRF5340 DK
nRF52840 Dongle
@@ -240,14 +256,15 @@ environment:
2. Run the following command to build the example, with _build-target_ replaced
with the build target name of the Nordic Semiconductor's kit you own, for
- example `nrf52840dk_nrf52840`:
+ example `nrf52840dk/nrf52840`:
- $ west build -b build-target
+ $ west build -b build-target --sysbuild
You only need to specify the build target on the first build. See
[Requirements](#requirements) for the build target names of compatible kits.
-The output `zephyr.hex` file will be available in the `build/zephyr/` directory.
+The output `zephyr.hex` file will be available in the `build/nrfconnect/zephyr/`
+directory.
### Removing build artifacts
@@ -262,7 +279,7 @@ following command:
To build the example with release configuration that disables the diagnostic
features like logs and command-line interface, run the following command:
- $ west build -b build-target -- -DCONF_FILE=prj_release.conf
+ $ west build -b build-target --sysbuild -- -DFILE_SUFFIX=release
Remember to replace _build-target_ with the build target name of the Nordic
Semiconductor's kit you own.
@@ -273,9 +290,9 @@ Support for DFU using Matter OTA is disabled by default.
To build the example with configuration that supports DFU, run the following
command with _build-target_ replaced with the build target name of the Nordic
-Semiconductor kit you are using (for example `nrf52840dk_nrf52840`):
+Semiconductor kit you are using (for example `nrf52840dk/nrf52840`):
- $ west build -b build-target -- -DCONF_FILE=prj_dfu.conf
+ $ west build -b build-target --sysbuild -- -DFILE_SUFFIX=dfu
> **Note**:
>
@@ -291,7 +308,7 @@ Semiconductor kit you are using (for example `nrf52840dk_nrf52840`):
#### Changing bootloader configuration
To change the default MCUboot configuration, edit the `prj.conf` file located in
-the `child_image/mcuboot` directory.
+the `sysbuild/mcuboot` directory.
#### Changing flash memory settings
@@ -303,8 +320,9 @@ purposes. You can change these settings by defining
This example uses this option to define using an external flash.
To modify the flash settings of your board (that is, your _build-target_, for
-example `nrf52840dk_nrf52840`), edit the `pm_static_dfu.yml` file located in the
-`configuration/build-target/` directory.
+example `nrf52840dk/nrf52840`), edit the `pm_static_.yml` file
+(for example `pm_static_nrf52840dk_nrf52840.yml`), located in the main
+application directory.
@@ -316,7 +334,7 @@ using the menuconfig utility.
To open the menuconfig utility, run the following command from the example
directory:
- $ west build -b build-target -t menuconfig
+ $ west build -b build-target --sysbuild -t menuconfig
Remember to replace _build-target_ with the build target name of the Nordic
Semiconductor's kit you own.
diff --git a/examples/chef/nrfconnect/README.md b/examples/chef/nrfconnect/README.md
index 8e17340c92069b..ca59a609946baf 100644
--- a/examples/chef/nrfconnect/README.md
+++ b/examples/chef/nrfconnect/README.md
@@ -1,5 +1,21 @@
# CHIP nRF Connect SDK Shell Application
+> **Note:** This example is intended only to perform smoke tests of a Matter
+> solution integrated with nRF Connect SDK platform. The example quality is not
+> production ready and it may contain minor bugs or use not optimal
+> configuration. It is not recommended to use this example as a basis for
+> creating a market ready product.
+>
+> For the production ready and optimized Matter samples, see
+> [nRF Connect SDK samples](https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/samples/matter.html).
+> The Matter samples in nRF Connect SDK use various additional software
+> components and provide multiple optional features that improve the developer
+> and user experience. To read more about it, see
+> [Matter support in nRF Connect SDK](https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/protocols/matter/index.html#ug-matter)
+> page. Using Matter samples from nRF Connect SDK allows you to get a full
+> Nordic technical support via [DevZone](https://devzone.nordicsemi.com/)
+> portal.
+
A [chip-shell](../README.md) project for the Nordic nRF52840 and nRF5340
development kits, built using the nRF Connect SDK.
diff --git a/examples/light-switch-app/nrfconnect/README.md b/examples/light-switch-app/nrfconnect/README.md
index ee78d91c2f7bd8..943759735f2bc2 100644
--- a/examples/light-switch-app/nrfconnect/README.md
+++ b/examples/light-switch-app/nrfconnect/README.md
@@ -1,5 +1,21 @@
# Matter nRF Connect Light Switch Example Application
+> **Note:** This example is intended only to perform smoke tests of a Matter
+> solution integrated with nRF Connect SDK platform. The example quality is not
+> production ready and it may contain minor bugs or use not optimal
+> configuration. It is not recommended to use this example as a basis for
+> creating a market ready product.
+>
+> For the production ready and optimized Matter samples, see
+> [nRF Connect SDK samples](https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/samples/matter.html).
+> The Matter samples in nRF Connect SDK use various additional software
+> components and provide multiple optional features that improve the developer
+> and user experience. To read more about it, see
+> [Matter support in nRF Connect SDK](https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/protocols/matter/index.html#ug-matter)
+> page. Using Matter samples from nRF Connect SDK allows you to get a full
+> Nordic technical support via [DevZone](https://devzone.nordicsemi.com/)
+> portal.
+
The nRF Connect Light Switch Example demonstrates how to remotely control a
lighting devices such as light bulbs or LEDs. The application should be used
together with the
@@ -199,18 +215,18 @@ The example supports building and running on the following devices:
| Hardware platform | Build target | Platform image |
| ----------------------------------------------------------------------------------------- | -------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------ |
-| [nRF52840 DK](https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-DK) | `nrf52840dk_nrf52840` | nRF52840 DK
nRF5340 DK
nRF7002 DK
nRF52840 DK
nRF5340 DK
nRF7002 DK
@@ -526,7 +538,7 @@ using the menuconfig utility.
To open the menuconfig utility, run the following command from the example
directory:
- $ west build -b build-target -t menuconfig
+ $ west build -b build-target --sysbuild -t menuconfig
Remember to replace _build-target_ with the build target name of the Nordic
Semiconductor's kit you own.
@@ -556,9 +568,6 @@ depending on the selected board:
command-line shell.
- release -- Release version of the application - can be used to enable only
the necessary application functionalities to optimize its performance.
-- no_dfu -- Debug version of the application without Device Firmware Upgrade
- feature support - can be used only for the nRF52840 DK and nRF5340 DK, as
- those platforms have DFU enabled by default.
For more information, see the
[Configuring nRF Connect SDK examples](../../../docs/guides/nrfconnect_examples_configuration.md)
diff --git a/examples/lighting-app/nrfconnect/README.md b/examples/lighting-app/nrfconnect/README.md
index b5ef3d7024a0f6..3ba3c74f56d70f 100644
--- a/examples/lighting-app/nrfconnect/README.md
+++ b/examples/lighting-app/nrfconnect/README.md
@@ -1,5 +1,21 @@
# Matter nRF Connect Lighting Example Application
+> **Note:** This example is intended only to perform smoke tests of a Matter
+> solution integrated with nRF Connect SDK platform. The example quality is not
+> production ready and it may contain minor bugs or use not optimal
+> configuration. It is not recommended to use this example as a basis for
+> creating a market ready product.
+>
+> For the production ready and optimized Matter samples, see
+> [nRF Connect SDK samples](https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/samples/matter.html).
+> The Matter samples in nRF Connect SDK use various additional software
+> components and provide multiple optional features that improve the developer
+> and user experience. To read more about it, see
+> [Matter support in nRF Connect SDK](https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/protocols/matter/index.html#ug-matter)
+> page. Using Matter samples from nRF Connect SDK allows you to get a full
+> Nordic technical support via [DevZone](https://devzone.nordicsemi.com/)
+> portal.
+
The nRF Connect Lighting Example demonstrates how to remotely control a white
dimmable light bulb. It uses buttons to test changing the lighting and device
states and LEDs to show the state of these changes. You can use this example as
@@ -153,10 +169,10 @@ The example supports building and running on the following devices:
| Hardware platform | Build target | Platform image |
| ------------------------------------------------------------------------------------------------- | -------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------------- |
-| [nRF52840 DK](https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-DK) | `nrf52840dk_nrf52840` | nRF52840 DK
nRF5340 DK
nRF52840 Dongle
nRF7002 DK
nRF52840 DK
nRF5340 DK
nRF52840 Dongle
nRF7002 DK
@@ -165,9 +181,9 @@ The example supports building and running on the following devices:
The development kits for this sample offer the following IPv6 network support
for Matter:
-- Matter over Thread is supported for `nrf52840dk_nrf52840` and
- `nrf5340dk_nrf5340_cpuapp`.
-- Matter over Wi-Fi is supported for `nrf7002dk_nrf5340_cpuapp`.
+- Matter over Thread is supported for `nrf52840dk/nrf52840` and
+ `nrf5340dk/nrf5340/cpuapp`.
+- Matter over Wi-Fi is supported for `nrf7002dk/nrf5340/cpuapp`.
## Device UI
@@ -339,16 +355,17 @@ Complete the following steps to build the sample:
2. Run the following command to build the example, with _build-target_ replaced
with the build target name of the Nordic Semiconductor's kit you own, for
- example `nrf52840dk_nrf52840`:
+ example `nrf52840dk/nrf52840`:
```
- $ west build -b build-target
+ $ west build -b build-target --sysbuild
```
You only need to specify the build target on the first build. See
[Requirements](#requirements) for the build target names of compatible kits.
-The output `zephyr.hex` file will be available in the `build/zephyr/` directory.
+The output `zephyr.hex` file will be available in the `build/nrfconnect/zephyr/`
+directory.
### Removing build artifacts
@@ -366,7 +383,7 @@ To build the example with release configuration that disables the diagnostic
features like logs and command-line interface, run the following command:
```
- $ west build -b build-target -- -DCONF_FILE=prj_release.conf
+ $ west build -b build-target --sysbuild -- -DFILE_SUFFIX=release
```
Remember to replace _build-target_ with the build target name of the Nordic
@@ -381,7 +398,7 @@ command with _build-target_ replaced with the build target name of the Nordic
Semiconductor's kit you own:
```
- $ west build -b build-target -- -DOVERLAY_CONFIG=rpc.overlay
+ $ west build -b build-target --sysbuild -- -DOVERLAY_CONFIG=rpc.overlay
```
### Building with Device Firmware Upgrade support
@@ -390,18 +407,10 @@ Support for DFU using Matter OTA is enabled by default.
To enable DFU over Bluetooth LE, run the following command with _build-target_
replaced with the build target name of the Nordic Semiconductor kit you are
-using (for example `nrf52840dk_nrf52840`):
-
- ```
- $ west build -b build-target -- -DCONFIG_CHIP_DFU_OVER_BT_SMP=y
- ```
-
-To completely disable support for both DFU methods, run the following command
-with _build-target_ replaced with the build target name of the Nordic
-Semiconductor kit you are using (for example `nrf52840dk_nrf52840`):
+using (for example `nrf52840dk/nrf52840`):
```
- $ west build -b build-target -- -DCONF_FILE=prj_no_dfu.conf
+ $ west build -b build-target --sysbuild -- -DCONFIG_CHIP_DFU_OVER_BT_SMP=y
```
> **Note**:
@@ -419,7 +428,7 @@ Semiconductor kit you are using (for example `nrf52840dk_nrf52840`):
#### Changing bootloader configuration
To change the default MCUboot configuration, edit the `prj.conf` file located in
-the `child_image/mcuboot` directory.
+the `sysbuild/mcuboot` directory.
Make sure to keep the configuration consistent with changes made to the
application configuration. This is necessary for the configuration to work, as
@@ -436,8 +445,9 @@ purposes. You can change these settings by defining
This example uses this option to define using an external flash.
To modify the flash settings of your board (that is, your _build-target_, for
-example `nrf52840dk_nrf52840`), edit the `pm_static_dfu.yml` file located in the
-`configuration/build-target/` directory.
+example `nrf52840dk/nrf52840`), edit the `pm_static_.yml` file
+(for example `pm_static_nrf52840dk_nrf52840.yml`), located in the main
+application directory.
@@ -450,7 +460,7 @@ To open the menuconfig utility, run the following command from the example
directory:
```
- $ west build -b build-target -t menuconfig
+ $ west build -b build-target --sysbuild -t menuconfig
```
Remember to replace _build-target_ with the build target name of the Nordic
@@ -484,9 +494,6 @@ depending on the selected board:
the necessary application functionalities to optimize its performance. It
can be used only for the nRF52840 DK and nRF5340 DK, as those platforms have
DFU enabled by default.
-- no_dfu -- Debug version of the application without Device Firmware Upgrade
- feature support - can be used for the nRF52840 DK, nRF5340 DK and nRF52840
- Dongle.
For more information, see the
[Configuring nRF Connect SDK examples](../../../docs/guides/nrfconnect_examples_configuration.md)
diff --git a/examples/lit-icd-app/nrfconnect/README.md b/examples/lit-icd-app/nrfconnect/README.md
index 704950fdcac63e..1ff58274962fd9 100644
--- a/examples/lit-icd-app/nrfconnect/README.md
+++ b/examples/lit-icd-app/nrfconnect/README.md
@@ -1,5 +1,21 @@
# Matter nRF Connect LIT ICD Example Application
+> **Note:** This example is intended only to perform smoke tests of a Matter
+> solution integrated with nRF Connect SDK platform. The example quality is not
+> production ready and it may contain minor bugs or use not optimal
+> configuration. It is not recommended to use this example as a basis for
+> creating a market ready product.
+>
+> For the production ready and optimized Matter samples, see
+> [nRF Connect SDK samples](https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/samples/matter.html).
+> The Matter samples in nRF Connect SDK use various additional software
+> components and provide multiple optional features that improve the developer
+> and user experience. To read more about it, see
+> [Matter support in nRF Connect SDK](https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/protocols/matter/index.html#ug-matter)
+> page. Using Matter samples from nRF Connect SDK allows you to get a full
+> Nordic technical support via [DevZone](https://devzone.nordicsemi.com/)
+> portal.
+
The nRF Connect LIT ICD Example allows to test the device that utilizes Long
Idle Time feature from the Intermittently Connected Device Management cluster.
It uses buttons to change the device states and LEDs to show the state of these
@@ -115,8 +131,8 @@ The example supports building and running on the following devices:
| Hardware platform | Build target | Platform image |
| ----------------------------------------------------------------------------------------- | -------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------ |
-| [nRF52840 DK](https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-DK) | `nrf52840dk_nrf52840` | nRF52840 DK
nRF5340 DK
nRF52840 DK
nRF5340 DK
@@ -248,14 +264,15 @@ Complete the following steps to build the sample:
2. Run the following command to build the example, with _build-target_ replaced
with the build target name of the Nordic Semiconductor's kit you own, for
- example `nrf52840dk_nrf52840`:
+ example `nrf52840dk/nrf52840`:
- $ west build -b build-target
+ $ west build -b build-target --sysbuild
You only need to specify the build target on the first build. See
[Requirements](#requirements) for the build target names of compatible kits.
-The output `zephyr.hex` file will be available in the `build/zephyr/` directory.
+The output `zephyr.hex` file will be available in the `build/nrfconnect/zephyr/`
+directory.
### Removing build artifacts
@@ -270,7 +287,7 @@ following command:
To build the example with release configuration that disables the diagnostic
features like logs and command-line interface, run the following command:
- $ west build -b build-target -- -DCONF_FILE=prj_release.conf
+ $ west build -b build-target --sysbuild -- -DFILE_SUFFIX=release
Remember to replace _build-target_ with the build target name of the Nordic
Semiconductor's kit you own.
@@ -279,12 +296,6 @@ Semiconductor's kit you own.
Support for DFU using Matter OTA is enabled by default.
-To completely disable support for DFU, run the following command with
-_build-target_ replaced with the build target name of the Nordic Semiconductor
-kit you are using (for example `nrf52840dk_nrf52840`):
-
- $ west build -b build-target -- -DCONF_FILE=prj_no_dfu.conf
-
> **Note**:
>
> There are two types of Device Firmware Upgrade modes: single-image DFU and
@@ -297,7 +308,7 @@ kit you are using (for example `nrf52840dk_nrf52840`):
#### Changing bootloader configuration
To change the default MCUboot configuration, edit the `prj.conf` file located in
-the `child_image/mcuboot` directory.
+the `sysbuild/mcuboot` directory.
Make sure to keep the configuration consistent with changes made to the
application configuration. This is necessary for the configuration to work, as
@@ -314,8 +325,9 @@ purposes. You can change these settings by defining
This example uses this option to define using an external flash.
To modify the flash settings of your board (that is, your _build-target_, for
-example `nrf52840dk_nrf52840`), edit the `pm_static_dfu.yml` file located in the
-`configuration/build-target/` directory.
+example `nrf52840dk/nrf52840`), edit the `pm_static_.yml` file
+(for example `pm_static_nrf52840dk_nrf52840.yml`), located in the main
+application directory.
@@ -327,7 +339,7 @@ using the menuconfig utility.
To open the menuconfig utility, run the following command from the example
directory:
- $ west build -b build-target -t menuconfig
+ $ west build -b build-target --sysbuild -t menuconfig
Remember to replace _build-target_ with the build target name of the Nordic
Semiconductor's kit you own.
@@ -357,8 +369,6 @@ depending on the selected board:
command-line shell.
- release -- Release version of the application - can be used to enable only
the necessary application functionalities to optimize its performance.
-- no_dfu -- Debug version of the application without Device Firmware Upgrade
- feature support.
For more information, see the
[Configuring nRF Connect SDK examples](../../../docs/guides/nrfconnect_examples_configuration.md)
diff --git a/examples/lock-app/nrfconnect/README.md b/examples/lock-app/nrfconnect/README.md
index 654f6988c8056f..14385357bc56df 100644
--- a/examples/lock-app/nrfconnect/README.md
+++ b/examples/lock-app/nrfconnect/README.md
@@ -1,5 +1,21 @@
# Matter nRF Connect Lock Example Application
+> **Note:** This example is intended only to perform smoke tests of a Matter
+> solution integrated with nRF Connect SDK platform. The example quality is not
+> production ready and it may contain minor bugs or use not optimal
+> configuration. It is not recommended to use this example as a basis for
+> creating a market ready product.
+>
+> For the production ready and optimized Matter samples, see
+> [nRF Connect SDK samples](https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/samples/matter.html).
+> The Matter samples in nRF Connect SDK use various additional software
+> components and provide multiple optional features that improve the developer
+> and user experience. To read more about it, see
+> [Matter support in nRF Connect SDK](https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/protocols/matter/index.html#ug-matter)
+> page. Using Matter samples from nRF Connect SDK allows you to get a full
+> Nordic technical support via [DevZone](https://devzone.nordicsemi.com/)
+> portal.
+
The nRF Connect Lock Example demonstrates how to remotely control a door lock
device with one basic bolt. It uses buttons to test changing the lock and device
states and LEDs to show the state of these changes. You can use this example as
@@ -148,9 +164,9 @@ The example supports building and running on the following devices:
| Hardware platform | Build target | Platform image |
| ----------------------------------------------------------------------------------------- | -------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------ |
-| [nRF52840 DK](https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-DK) | `nrf52840dk_nrf52840` | nRF52840 DK
nRF5340 DK
nRF7002 DK
nRF52840 DK
nRF5340 DK
nRF7002 DK
@@ -159,9 +175,9 @@ The example supports building and running on the following devices:
The development kits for this sample offer the following IPv6 network support
for Matter:
-- Matter over Thread is supported for `nrf52840dk_nrf52840` and
- `nrf5340dk_nrf5340_cpuapp`.
-- Matter over Wi-Fi is supported for `nrf7002dk_nrf5340_cpuapp`.
+- Matter over Thread is supported for `nrf52840dk/nrf52840` and
+ `nrf5340dk/nrf5340/cpuapp`.
+- Matter over Wi-Fi is supported for `nrf7002dk/nrf5340/cpuapp`.
## Device UI
@@ -325,14 +341,15 @@ Complete the following steps to build the sample:
2. Run the following command to build the example, with _build-target_ replaced
with the build target name of the Nordic Semiconductor's kit you own, for
- example `nrf52840dk_nrf52840`:
+ example `nrf52840dk/nrf52840`:
- $ west build -b build-target
+ $ west build -b build-target --sysbuild
You only need to specify the build target on the first build. See
[Requirements](#requirements) for the build target names of compatible kits.
-The output `zephyr.hex` file will be available in the `build/zephyr/` directory.
+The output `zephyr.hex` file will be available in the `build/nrfconnect/zephyr/`
+directory.
### Removing build artifacts
@@ -347,7 +364,7 @@ following command:
To build the example with release configuration that disables the diagnostic
features like logs and command-line interface, run the following command:
- $ west build -b build-target -- -DCONF_FILE=prj_release.conf
+ $ west build -b build-target --sysbuild -- -DFILE_SUFFIX=release
Remember to replace _build-target_ with the build target name of the Nordic
Semiconductor's kit you own.
@@ -358,15 +375,9 @@ Support for DFU using Matter OTA is enabled by default.
To enable DFU over Bluetooth LE, run the following command with _build-target_
replaced with the build target name of the Nordic Semiconductor kit you are
-using (for example `nrf52840dk_nrf52840`):
-
- $ west build -b build-target -- -DCONFIG_CHIP_DFU_OVER_BT_SMP=y
-
-To completely disable support for both DFU methods, run the following command
-with _build-target_ replaced with the build target name of the Nordic
-Semiconductor kit you are using (for example `nrf52840dk_nrf52840`):
+using (for example `nrf52840dk/nrf52840`):
- $ west build -b build-target -- -DCONF_FILE=prj_no_dfu.conf
+ $ west build -b build-target --sysbuild -- -DCONFIG_CHIP_DFU_OVER_BT_SMP=y
> **Note**:
>
@@ -380,7 +391,7 @@ Semiconductor kit you are using (for example `nrf52840dk_nrf52840`):
#### Changing bootloader configuration
To change the default MCUboot configuration, edit the `prj.conf` file located in
-the `child_image/mcuboot` directory.
+the `sysbuild/mcuboot` directory.
Make sure to keep the configuration consistent with changes made to the
application configuration. This is necessary for the configuration to work, as
@@ -397,8 +408,9 @@ purposes. You can change these settings by defining
This example uses this option to define using an external flash.
To modify the flash settings of your board (that is, your _build-target_, for
-example `nrf52840dk_nrf52840`), edit the `pm_static_dfu.yml` file located in the
-`configuration/build-target/` directory.
+example `nrf52840dk/nrf52840`), edit the `pm_static_.yml` file
+(for example `pm_static_nrf52840dk_nrf52840.yml`), located in the main
+application directory.
@@ -410,7 +422,7 @@ using the menuconfig utility.
To open the menuconfig utility, run the following command from the example
directory:
- $ west build -b build-target -t menuconfig
+ $ west build -b build-target --sysbuild -t menuconfig
Remember to replace _build-target_ with the build target name of the Nordic
Semiconductor's kit you own.
@@ -440,9 +452,6 @@ depending on the selected board:
command-line shell.
- release -- Release version of the application - can be used to enable only
the necessary application functionalities to optimize its performance.
-- no_dfu -- Debug version of the application without Device Firmware Upgrade
- feature support - can be used only for the nRF52840 DK and nRF5340 DK, as
- those platforms have DFU enabled by default.
For more information, see the
[Configuring nRF Connect SDK examples](../../../docs/guides/nrfconnect_examples_configuration.md)
diff --git a/examples/pump-app/nrfconnect/README.md b/examples/pump-app/nrfconnect/README.md
index 50e8a1b0e6d0a0..16fbc2f0143c2c 100644
--- a/examples/pump-app/nrfconnect/README.md
+++ b/examples/pump-app/nrfconnect/README.md
@@ -1,5 +1,21 @@
# Matter nRF Connect Pump Example Application
+> **Note:** This example is intended only to perform smoke tests of a Matter
+> solution integrated with nRF Connect SDK platform. The example quality is not
+> production ready and it may contain minor bugs or use not optimal
+> configuration. It is not recommended to use this example as a basis for
+> creating a market ready product.
+>
+> For the production ready and optimized Matter samples, see
+> [nRF Connect SDK samples](https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/samples/matter.html).
+> The Matter samples in nRF Connect SDK use various additional software
+> components and provide multiple optional features that improve the developer
+> and user experience. To read more about it, see
+> [Matter support in nRF Connect SDK](https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/protocols/matter/index.html#ug-matter)
+> page. Using Matter samples from nRF Connect SDK allows you to get a full
+> Nordic technical support via [DevZone](https://devzone.nordicsemi.com/)
+> portal.
+
The nRF Connect Pump Example demonstrates how to remotely control a pump device
with basic start/stop functionality. It uses buttons to test changing the pump
state and device states and LEDs to show the state of these changes. This
@@ -139,8 +155,8 @@ The example supports building and running on the following devices:
| Hardware platform | Build target | Platform image |
| ----------------------------------------------------------------------------------------- | -------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------ |
-| [nRF52840 DK](https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-DK) | `nrf52840dk_nrf52840` | nRF52840 DK
nRF5340 DK
nRF52840 DK
nRF5340 DK
@@ -283,14 +299,15 @@ Complete the following steps to build the sample:
2. Run the following command to build the example, with _build-target_ replaced
with the build target name of the Nordic Semiconductor's kit you own, for
- example `nrf52840dk_nrf52840`:
+ example `nrf52840dk/nrf52840`:
- $ west build -b build-target
+ $ west build -b build-target --sysbuild
You only need to specify the build target on the first build. See
[Requirements](#requirements) for the build target names of compatible kits.
-The output `zephyr.hex` file will be available in the `build/zephyr/` directory.
+The output `zephyr.hex` file will be available in the `build/nrfconnect/zephyr/`
+directory.
### Removing build artifacts
@@ -305,7 +322,7 @@ following command:
To build the example with release configuration that disables the diagnostic
features like logs and command-line interface, run the following command:
- $ west build -b build-target -- -DCONF_FILE=prj_release.conf
+ $ west build -b build-target --sysbuild -- -DFILE_SUFFIX=release
Remember to replace _build-target_ with the build target name of the Nordic
Semiconductor's kit you own.
@@ -316,15 +333,9 @@ Support for DFU using Matter OTA is enabled by default.
To enable DFU over Bluetooth LE, run the following command with _build-target_
replaced with the build target name of the Nordic Semiconductor kit you are
-using (for example `nrf52840dk_nrf52840`):
-
- $ west build -b build-target -- -DCONFIG_CHIP_DFU_OVER_BT_SMP=y
-
-To completely disable support for both DFU methods, run the following command
-with _build-target_ replaced with the build target name of the Nordic
-Semiconductor kit you are using (for example `nrf52840dk_nrf52840`):
+using (for example `nrf52840dk/nrf52840`):
- $ west build -b build-target -- -DCONF_FILE=prj_no_dfu.conf
+ $ west build -b build-target --sysbuild -- -DCONFIG_CHIP_DFU_OVER_BT_SMP=y
> **Note**:
>
@@ -341,7 +352,7 @@ Semiconductor kit you are using (for example `nrf52840dk_nrf52840`):
#### Changing bootloader configuration
To change the default MCUboot configuration, edit the `prj.conf` file located in
-the `child_image/mcuboot` directory.
+the `sysbuild/mcuboot` directory.
Make sure to keep the configuration consistent with changes made to the
application configuration. This is necessary for the configuration to work, as
@@ -358,8 +369,9 @@ purposes. You can change these settings by defining
This example uses this option to define using an external flash.
To modify the flash settings of your board (that is, your _build-target_, for
-example `nrf52840dk_nrf52840`), edit the `pm_static_dfu.yml` file located in the
-`configuration/build-target/` directory.
+example `nrf52840dk/nrf52840`), edit the `pm_static_.yml` file
+(for example `pm_static_nrf52840dk_nrf52840.yml`), located in the main
+application directory.
@@ -371,7 +383,7 @@ using the menuconfig utility.
To open the menuconfig utility, run the following command from the example
directory:
- $ west build -b build-target -t menuconfig
+ $ west build -b build-target --sysbuild -t menuconfig
Remember to replace _build-target_ with the build target name of the Nordic
Semiconductor's kit you own.
@@ -401,9 +413,6 @@ depending on the selected board:
command-line shell.
- release -- Release version of the application - can be used to enable only
the necessary application functionalities to optimize its performance.
-- no_dfu -- Debug version of the application without Device Firmware Upgrade
- feature support - can be used only for the nRF52840 DK and nRF5340 DK, as
- those platforms have DFU enabled by default.
For more information, see the
[Configuring nRF Connect SDK examples](../../../docs/guides/nrfconnect_examples_configuration.md)
diff --git a/examples/pump-controller-app/nrfconnect/README.md b/examples/pump-controller-app/nrfconnect/README.md
index 948aa20f54d0d8..64f37c4bb6a7aa 100644
--- a/examples/pump-controller-app/nrfconnect/README.md
+++ b/examples/pump-controller-app/nrfconnect/README.md
@@ -1,5 +1,21 @@
# Matter nRF Connect Pump Example Application
+> **Note:** This example is intended only to perform smoke tests of a Matter
+> solution integrated with nRF Connect SDK platform. The example quality is not
+> production ready and it may contain minor bugs or use not optimal
+> configuration. It is not recommended to use this example as a basis for
+> creating a market ready product.
+>
+> For the production ready and optimized Matter samples, see
+> [nRF Connect SDK samples](https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/samples/matter.html).
+> The Matter samples in nRF Connect SDK use various additional software
+> components and provide multiple optional features that improve the developer
+> and user experience. To read more about it, see
+> [Matter support in nRF Connect SDK](https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/protocols/matter/index.html#ug-matter)
+> page. Using Matter samples from nRF Connect SDK allows you to get a full
+> Nordic technical support via [DevZone](https://devzone.nordicsemi.com/)
+> portal.
+
The nRF Connect Pump Controller Example demonstrates how to implement a pump
controller client device with basic start/stop functionality. It uses buttons to
test changing the pump state and device states and LEDs to show the state of
@@ -140,8 +156,8 @@ The example supports building and running on the following devices:
| Hardware platform | Build target | Platform image |
| ----------------------------------------------------------------------------------------- | -------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------ |
-| [nRF52840 DK](https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-DK) | `nrf52840dk_nrf52840` | nRF52840 DK
nRF5340 DK
nRF52840 DK
nRF5340 DK
@@ -283,14 +299,15 @@ Complete the following steps to build the sample:
2. Run the following command to build the example, with _build-target_ replaced
with the build target name of the Nordic Semiconductor's kit you own, for
- example `nrf52840dk_nrf52840`:
+ example `nrf52840dk/nrf52840`:
- $ west build -b build-target
+ $ west build -b build-target --sysbuild
You only need to specify the build target on the first build. See
[Requirements](#requirements) for the build target names of compatible kits.
-The output `zephyr.hex` file will be available in the `build/zephyr/` directory.
+The output `zephyr.hex` file will be available in the `build/nrfconnect/zephyr/`
+directory.
### Removing build artifacts
@@ -305,7 +322,7 @@ following command:
To build the example with release configuration that disables the diagnostic
features like logs and command-line interface, run the following command:
- $ west build -b build-target -- -DCONF_FILE=prj_release.conf
+ $ west build -b build-target --sysbuild -- -DFILE_SUFFIX=release
Remember to replace _build-target_ with the build target name of the Nordic
Semiconductor's kit you own.
@@ -316,15 +333,9 @@ Support for DFU using Matter OTA is enabled by default.
To enable DFU over Bluetooth LE, run the following command with _build-target_
replaced with the build target name of the Nordic Semiconductor kit you are
-using (for example `nrf52840dk_nrf52840`):
-
- $ west build -b build-target -- -DCONFIG_CHIP_DFU_OVER_BT_SMP=y
-
-To completely disable support for both DFU methods, run the following command
-with _build-target_ replaced with the build target name of the Nordic
-Semiconductor kit you are using (for example `nrf52840dk_nrf52840`):
+using (for example `nrf52840dk/nrf52840`):
- $ west build -b build-target -- -DCONF_FILE=prj_no_dfu.conf
+ $ west build -b build-target --sysbuild -- -DCONFIG_CHIP_DFU_OVER_BT_SMP=y
> **Note**:
>
@@ -341,7 +352,7 @@ Semiconductor kit you are using (for example `nrf52840dk_nrf52840`):
#### Changing bootloader configuration
To change the default MCUboot configuration, edit the `prj.conf` file located in
-the `child_image/mcuboot` directory.
+the `sysbuild/mcuboot` directory.
Make sure to keep the configuration consistent with changes made to the
application configuration. This is necessary for the configuration to work, as
@@ -358,8 +369,9 @@ purposes. You can change these settings by defining
This example uses this option to define using an external flash.
To modify the flash settings of your board (that is, your _build-target_, for
-example `nrf52840dk_nrf52840`), edit the `pm_static_dfu.yml` file located in the
-`configuration/build-target/` directory.
+example `nrf52840dk/nrf52840`), edit the `pm_static_.yml` file
+(for example `pm_static_nrf52840dk_nrf52840.yml`), located in the main
+application directory.
@@ -371,7 +383,7 @@ using the menuconfig utility.
To open the menuconfig utility, run the following command from the example
directory:
- $ west build -b build-target -t menuconfig
+ $ west build -b build-target --sysbuild -t menuconfig
Remember to replace _build-target_ with the build target name of the Nordic
Semiconductor's kit you own.
@@ -401,9 +413,6 @@ depending on the selected board:
command-line shell.
- release -- Release version of the application - can be used to enable only
the necessary application functionalities to optimize its performance.
-- no_dfu -- Debug version of the application without Device Firmware Upgrade
- feature support - can be used only for the nRF52840 DK and nRF5340 DK, as
- those platforms have DFU enabled by default.
For more information, see the
[Configuring nRF Connect SDK examples](../../../docs/guides/nrfconnect_examples_configuration.md)
diff --git a/examples/shell/nrfconnect/README.md b/examples/shell/nrfconnect/README.md
index f0abf5e312462c..551e0d67c052a1 100644
--- a/examples/shell/nrfconnect/README.md
+++ b/examples/shell/nrfconnect/README.md
@@ -1,5 +1,21 @@
# Matter nRF Connect SDK Shell Application
+> **Note:** This example is intended only to perform smoke tests of a Matter
+> solution integrated with nRF Connect SDK platform. The example quality is not
+> production ready and it may contain minor bugs or use not optimal
+> configuration. It is not recommended to use this example as a basis for
+> creating a market ready product.
+>
+> For the production ready and optimized Matter samples, see
+> [nRF Connect SDK samples](https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/samples/matter.html).
+> The Matter samples in nRF Connect SDK use various additional software
+> components and provide multiple optional features that improve the developer
+> and user experience. To read more about it, see
+> [Matter support in nRF Connect SDK](https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/protocols/matter/index.html#ug-matter)
+> page. Using Matter samples from nRF Connect SDK allows you to get a full
+> Nordic technical support via [DevZone](https://devzone.nordicsemi.com/)
+> portal.
+
A [Matter shell](../README.md) project for the Nordic nRF52840 and nRF5340
development kits, built using the nRF Connect SDK.
diff --git a/examples/window-app/nrfconnect/README.md b/examples/window-app/nrfconnect/README.md
index b61f05dddfb15e..964af0c265cb7e 100644
--- a/examples/window-app/nrfconnect/README.md
+++ b/examples/window-app/nrfconnect/README.md
@@ -1,5 +1,21 @@
# Matter nRF Connect Window Covering Example Application
+> **Note:** This example is intended only to perform smoke tests of a Matter
+> solution integrated with nRF Connect SDK platform. The example quality is not
+> production ready and it may contain minor bugs or use not optimal
+> configuration. It is not recommended to use this example as a basis for
+> creating a market ready product.
+>
+> For the production ready and optimized Matter samples, see
+> [nRF Connect SDK samples](https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/samples/matter.html).
+> The Matter samples in nRF Connect SDK use various additional software
+> components and provide multiple optional features that improve the developer
+> and user experience. To read more about it, see
+> [Matter support in nRF Connect SDK](https://docs.nordicsemi.com/bundle/ncs-latest/page/nrf/protocols/matter/index.html#ug-matter)
+> page. Using Matter samples from nRF Connect SDK allows you to get a full
+> Nordic technical support via [DevZone](https://devzone.nordicsemi.com/)
+> portal.
+
The nRF Connect Window Covering Example demonstrates how to remotely control a
window shutter device. It uses buttons to test changing cover position and
device states and LEDs to show the state of these changes. You can use this
@@ -131,8 +147,8 @@ The example supports building and running on the following devices:
| Hardware platform | Build target | Platform image |
| ----------------------------------------------------------------------------------------- | -------------------------- | ------------------------------------------------------------------------------------------------------------------------------------------------ |
-| [nRF52840 DK](https://www.nordicsemi.com/Software-and-Tools/Development-Kits/nRF52840-DK) | `nrf52840dk_nrf52840` | nRF52840 DK
nRF5340 DK
nRF52840 DK
nRF5340 DK
@@ -299,14 +315,15 @@ Complete the following steps to build the sample:
2. Run the following command to build the example, with _build-target_ replaced
with the build target name of the Nordic Semiconductor's kit you own, for
- example `nrf52840dk_nrf52840`:
+ example `nrf52840dk/nrf52840`:
- $ west build -b build-target
+ $ west build -b build-target --sysbuild
You only need to specify the build target on the first build. See
[Requirements](#requirements) for the build target names of compatible kits.
-The output `zephyr.hex` file will be available in the `build/zephyr/` directory.
+The output `zephyr.hex` file will be available in the `build/nrfconnect/zephyr/`
+directory.
### Removing build artifacts
@@ -321,7 +338,7 @@ following command:
To build the example with release configuration that disables the diagnostic
features like logs and command-line interface, run the following command:
- $ west build -b build-target -- -DCONF_FILE=prj_release.conf
+ $ west build -b build-target --sysbuild -- -DFILE_SUFFIX=release
Remember to replace _build-target_ with the build target name of the Nordic
Semiconductor's kit you own.
@@ -332,18 +349,12 @@ Support for DFU using Matter OTA is enabled by default.
To enable DFU over Bluetooth LE, run the following command with _build-target_
replaced with the build target name of the Nordic Semiconductor kit you are
-using (for example `nrf52840dk_nrf52840`):
+using (for example `nrf52840dk/nrf52840`):
```
- $ west build -b build-target -- -DCONFIG_CHIP_DFU_OVER_BT_SMP=y
+ $ west build -b build-target --sysbuild -- -DCONFIG_CHIP_DFU_OVER_BT_SMP=y
```
-To completely disable support for DFU, run the following command with
-_build-target_ replaced with the build target name of the Nordic Semiconductor
-kit you are using (for example `nrf52840dk_nrf52840`):
-
- $ west build -b build-target -- -DCONF_FILE=prj_no_dfu.conf
-
> **Note**:
>
> There are two types of Device Firmware Upgrade modes: single-image DFU and
@@ -356,7 +367,7 @@ kit you are using (for example `nrf52840dk_nrf52840`):
#### Changing bootloader configuration
To change the default MCUboot configuration, edit the `prj.conf` file located in
-the `child_image/mcuboot` directory.
+the `sysbuild/mcuboot` directory.
Make sure to keep the configuration consistent with changes made to the
application configuration. This is necessary for the configuration to work, as
@@ -373,8 +384,9 @@ purposes. You can change these settings by defining
This example uses this option to define using an external flash.
To modify the flash settings of your board (that is, your _build-target_, for
-example `nrf52840dk_nrf52840`), edit the `pm_static_dfu.yml` file located in the
-`configuration/build-target/` directory.
+example `nrf52840dk/nrf52840`), edit the `pm_static_.yml` file
+(for example `pm_static_nrf52840dk_nrf52840.yml`), located in the main
+application directory.
@@ -386,7 +398,7 @@ using the menuconfig utility.
To open the menuconfig utility, run the following command from the example
directory:
- $ west build -b build-target -t menuconfig
+ $ west build -b build-target --sysbuild -t menuconfig
Remember to replace _build-target_ with the build target name of the Nordic
Semiconductor's kit you own.
@@ -416,9 +428,6 @@ depending on the selected board:
command-line shell.
- release — Release version of the application - can be used to enable
only the necessary application functionalities to optimize its performance.
-- no_dfu — Debug version of the application without Device Firmware
- Upgrade feature support - can be used only for the nRF52840 DK and nRF5340
- DK, as those platforms have DFU enabled by default.
For more information, see the
[Configuring nRF Connect SDK examples](../../../docs/guides/nrfconnect_examples_configuration.md)