diff --git a/CYD-Klipper/boards/esp32-2432S028RV1-smartdisplay.json b/CYD-Klipper/boards/esp32-2432S028RV1-smartdisplay.json new file mode 100644 index 0000000..9db9ad3 --- /dev/null +++ b/CYD-Klipper/boards/esp32-2432S028RV1-smartdisplay.json @@ -0,0 +1,125 @@ +{ + "build": { + "arduino": { + "ldscript": "esp32_out.ld" + }, + "core": "esp32", + "extra_flags": [ + "'-D ARDUINO_ESP32_DEV'", + "'-D ESP32_2432S028R'", + "'-D LCD_WIDTH=240'", + "'-D LCD_HEIGHT=320'", + "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT/4)'", + "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT)'", + "'-D BCKL=21'", + "'-D LCD_ILI9341_SPI'", + "'-D ILI9341_SPI_HOST=SPI2_HOST'", + "'-D ILI9341_SPI_DMA_CHANNEL=SPI_DMA_CH_AUTO'", + "'-D ILI9341_SPI_BUS_MOSI_IO_NUM=13'", + "'-D ILI9341_SPI_BUS_MISO_IO_NUM=12'", + "'-D ILI9341_SPI_BUS_SCLK_IO_NUM=14'", + "'-D ILI9341_SPI_BUS_QUADWP_IO_NUM=GPIO_NUM_NC'", + "'-D ILI9341_SPI_BUS_QUADHD_IO_NUM=GPIO_NUM_NC'", + "'-D ILI9341_SPI_BUS_MAX_TRANSFER_SZ=0'", + "'-D ILI9341_SPI_BUS_FLAGS=0'", + "'-D ILI9341_SPI_BUS_INTR_FLAGS=0'", + "'-D ILI9341_SPI_CONFIG_CS_GPIO_NUM=15'", + "'-D ILI9341_SPI_CONFIG_DC_GPIO_NUM=2'", + "'-D ILI9341_SPI_CONFIG_SPI_MODE=SPI_MODE0'", + "'-D ILI9341_SPI_CONFIG_PCLK_HZ=24000000'", + "'-D ILI9341_SPI_CONFIG_TRANS_QUEUE_DEPTH=10'", + "'-D ILI9341_SPI_CONFIG_LCD_CMD_BITS=8'", + "'-D ILI9341_SPI_CONFIG_LCD_PARAM_BITS=8'", + "'-D ILI9341_SPI_CONFIG_FLAGS_DC_AS_CMD_PHASE=false'", + "'-D ILI9341_SPI_CONFIG_FLAGS_DC_LOW_ON_DATA=false'", + "'-D ILI9341_SPI_CONFIG_FLAGS_OCTAL_MODE=false'", + "'-D ILI9341_SPI_CONFIG_FLAGS_LSB_FIRST=false'", + "'-D ILI9341_DEV_CONFIG_RESET_GPIO_NUM=GPIO_NUM_NC'", + "'-D ILI9341_DEV_CONFIG_COLOR_SPACE=ESP_LCD_COLOR_SPACE_BGR'", + "'-D ILI9341_DEV_CONFIG_BITS_PER_PIXEL=16'", + "'-D ILI9341_DEV_CONFIG_FLAGS_RESET_ACTIVE_HIGH=false'", + "'-D ILI9341_DEV_CONFIG_VENDOR_CONFIG=NULL'", + "'-D LCD_SWAP_XY=false'", + "'-D LCD_MIRROR_X=true'", + "'-D LCD_MIRROR_Y=false'", + "'-D BOARD_HAS_TOUCH'", + "'-D TOUCH_XPT2046_SPI'", + "'-D XPT2046_SPI_HOST=SPI3_HOST'", + "'-D XPT2046_SPI_DMA_CHANNEL=SPI_DMA_CH_AUTO'", + "'-D XPT2046_SPI_BUS_MOSI_IO_NUM=32'", + "'-D XPT2046_SPI_BUS_MISO_IO_NUM=39'", + "'-D XPT2046_SPI_BUS_SCLK_IO_NUM=25'", + "'-D XPT2046_SPI_BUS_QUADWP_IO_NUM=GPIO_NUM_NC'", + "'-D XPT2046_SPI_BUS_QUADHD_IO_NUM=GPIO_NUM_NC'", + "'-D XPT2046_SPI_CONFIG_CS_GPIO_NUM=33'", + "'-D XPT2046_SPI_CONFIG_DC_GPIO_NUM=GPIO_NUM_NC'", + "'-D XPT2046_SPI_CONFIG_SPI_MODE=SPI_MODE0'", + "'-D XPT2046_SPI_CONFIG_PCLK_HZ=2000000'", + "'-D XPT2046_SPI_CONFIG_TRANS_QUEUE_DEPTH=3'", + "'-D XPT2046_SPI_CONFIG_LCD_CMD_BITS=8'", + "'-D XPT2046_SPI_CONFIG_LCD_PARAM_BITS=8'", + "'-D XPT2046_SPI_CONFIG_FLAGS_DC_AS_CMD_PHASE=false'", + "'-D XPT2046_SPI_CONFIG_FLAGS_DC_LOW_ON_DATA=false'", + "'-D XPT2046_SPI_CONFIG_FLAGS_OCTAL_MODE=false'", + "'-D XPT2046_SPI_CONFIG_FLAGS_LSB_FIRST=false'", + "'-D XPT2046_TOUCH_CONFIG_X_MAX=LCD_WIDTH'", + "'-D XPT2046_TOUCH_CONFIG_Y_MAX=LCD_HEIGHT'", + "'-D XPT2046_TOUCH_CONFIG_RST_GPIO_NUM=GPIO_NUM_NC'", + "'-D XPT2046_TOUCH_CONFIG_INT_GPIO_NUM=36'", + "'-D XPT2046_TOUCH_CONFIG_LEVELS_RESET=0'", + "'-D XPT2046_TOUCH_CONFIG_LEVELS_INTERRUPT=0'", + "'-D TOUCH_SWAP_XY=true'", + "'-D TOUCH_SWAP_X=true'", + "'-D TOUCH_SWAP_Y=false'", + "'-D BOARD_HAS_TF'", + "'-D TF_CS=5'", + "'-D TF_SPI_MOSI=23'", + "'-D TF_SPI_SCLK=18'", + "'-D TF_SPI_MISO=19'", + "'-D BOARD_HAS_RGB_LED'", + "'-D RGB_LED_R=4'", + "'-D RGB_LED_G=16'", + "'-D RGB_LED_B=17'", + "'-D BOARD_HAS_CDS'", + "'-D CDS=34'", + "'-D BOARD_HAS_SPEAK'", + "'-D SPEAK=26'", + + "-DCYD_SCREEN_GAP_PX=8", + "-DCYD_SCREEN_MIN_BUTTON_HEIGHT_PX=35", + "-DCYD_SCREEN_MIN_BUTTON_WIDTH_PX=35", + "-DCYD_SCREEN_FONT=lv_font_montserrat_14", + "-DCYD_SCREEN_FONT_SMALL=lv_font_montserrat_10", + "-DCYD_SCREEN_SIDEBAR_SIZE_PX=40", + "-DCYD_SCREEN_DRIVER_ESP32_SMARTDISPLAY=1" + ], + "f_cpu": "240000000L", + "f_flash": "40000000L", + "flash_mode": "dio", + "mcu": "esp32", + "variant": "esp32" + }, + "connectivity": [ + "wifi", + "bluetooth", + "ethernet", + "can" + ], + "debug": { + "openocd_board": "esp-wroom-32.cfg" + }, + "frameworks": [ + "arduino", + "espidf" + ], + "name": "esp32-2432S028Rv1-SD", + "upload": { + "flash_size": "4MB", + "maximum_ram_size": 327680, + "maximum_size": 4194304, + "require_upload_port": true, + "speed": 460800 + }, + "url": "https://www.aliexpress.com/item/1005004502250619.html", + "vendor": "Sunton" + } \ No newline at end of file diff --git a/CYD-Klipper/boards/esp32-2432S028RV2-smartdisplay.json b/CYD-Klipper/boards/esp32-2432S028RV2-smartdisplay.json new file mode 100644 index 0000000..b99744c --- /dev/null +++ b/CYD-Klipper/boards/esp32-2432S028RV2-smartdisplay.json @@ -0,0 +1,125 @@ +{ + "build": { + "arduino": { + "ldscript": "esp32_out.ld" + }, + "core": "esp32", + "extra_flags": [ + "'-D ARDUINO_ESP32_DEV'", + "'-D ESP32_2432S028Rv2'", + "'-D LCD_WIDTH=240'", + "'-D LCD_HEIGHT=320'", + "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT/4)'", + "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_INTERNAL|MALLOC_CAP_8BIT)'", + "'-D BCKL=21'", + "'-D LCD_ILI9341_SPI'", + "'-D ILI9341_SPI_HOST=SPI2_HOST'", + "'-D ILI9341_SPI_DMA_CHANNEL=SPI_DMA_CH_AUTO'", + "'-D ILI9341_SPI_BUS_MOSI_IO_NUM=13'", + "'-D ILI9341_SPI_BUS_MISO_IO_NUM=12'", + "'-D ILI9341_SPI_BUS_SCLK_IO_NUM=14'", + "'-D ILI9341_SPI_BUS_QUADWP_IO_NUM=GPIO_NUM_NC'", + "'-D ILI9341_SPI_BUS_QUADHD_IO_NUM=GPIO_NUM_NC'", + "'-D ILI9341_SPI_BUS_MAX_TRANSFER_SZ=0'", + "'-D ILI9341_SPI_BUS_FLAGS=0'", + "'-D ILI9341_SPI_BUS_INTR_FLAGS=0'", + "'-D ILI9341_SPI_CONFIG_CS_GPIO_NUM=15'", + "'-D ILI9341_SPI_CONFIG_DC_GPIO_NUM=2'", + "'-D ILI9341_SPI_CONFIG_SPI_MODE=SPI_MODE0'", + "'-D ILI9341_SPI_CONFIG_PCLK_HZ=24000000'", + "'-D ILI9341_SPI_CONFIG_TRANS_QUEUE_DEPTH=10'", + "'-D ILI9341_SPI_CONFIG_LCD_CMD_BITS=8'", + "'-D ILI9341_SPI_CONFIG_LCD_PARAM_BITS=8'", + "'-D ILI9341_SPI_CONFIG_FLAGS_DC_AS_CMD_PHASE=false'", + "'-D ILI9341_SPI_CONFIG_FLAGS_DC_LOW_ON_DATA=false'", + "'-D ILI9341_SPI_CONFIG_FLAGS_OCTAL_MODE=false'", + "'-D ILI9341_SPI_CONFIG_FLAGS_LSB_FIRST=false'", + "'-D ILI9341_DEV_CONFIG_RESET_GPIO_NUM=GPIO_NUM_NC'", + "'-D ILI9341_DEV_CONFIG_COLOR_SPACE=ESP_LCD_COLOR_SPACE_BGR'", + "'-D ILI9341_DEV_CONFIG_BITS_PER_PIXEL=16'", + "'-D ILI9341_DEV_CONFIG_FLAGS_RESET_ACTIVE_HIGH=false'", + "'-D ILI9341_DEV_CONFIG_VENDOR_CONFIG=\"(ili9341_vendor_config_t[]){{.init_cmds=(ili9341_lcd_init_cmd_t[]){{.cmd=0xCF,.data=(uint8_t[]){0x00,0xC1,0x30},.data_bytes=3},{.cmd=0xED,.data=(uint8_t[]){0x64,0x03,0x12,0x81},.data_bytes=4},{.cmd=0xE8,.data=(uint8_t[]){0x85,0x00,0x78},.data_bytes=3},{.cmd=0xCB,.data=(uint8_t[]){0x39,0x2C,0x00,0x34,0x02},.data_bytes=5},{.cmd=0xF7,.data=(uint8_t[]){0x20},.data_bytes=1},{.cmd=0xEA,.data=(uint8_t[]){0x00,0x00},.data_bytes=2},{.cmd=0xC0,.data=(uint8_t[]){0x10},.data_bytes=1},{.cmd=0xC1,.data=(uint8_t[]){0x00},.data_bytes=1},{.cmd=0xC5,.data=(uint8_t[]){0x30,0x30},.data_bytes=2,},{.cmd=0xC7,.data=(uint8_t[]){0xB7},.data_bytes=1},{.cmd=0x3A,.data=(uint8_t[]){0x55},.data_bytes=1},{.cmd=0x36,.data=(uint8_t[]){0x08},.data_bytes=1},{.cmd=0xB1,.data=(uint8_t[]){0x00,0x1A},.data_bytes=2},{.cmd=0xB6,.data=(uint8_t[]){0x08,0x82,0x27},.data_bytes=3},{.cmd=0xF2,.data=(uint8_t[]){0x00},.data_bytes=1},{.cmd=0x26,.data=(uint8_t[]){0x01},.data_bytes=1},{.cmd=0xE0,.data=(uint8_t[]){0x0F,0x2A,0x28,0x08,0x0E,0x08,0x54,0xA9,0x43,0x0A,0x0F,0x00,0x00,0x00,0x00},.data_bytes=15},{.cmd=0xE1,.data=(uint8_t[]){0x00,0x15,0x17,0x07,0x11,0x06,0x2B,0x56,0x3C,0x05,0x10,0x0F,0x3F,0x3F,0x0F},.data_bytes=15},{.cmd=0x2B,.data=(uint8_t[]){0x00,0x00,0x01,0x3F},.data_bytes=4},{.cmd=0x2A,.data=(uint8_t[]){0x00,0x00,0x00,0xEF},.data_bytes=4},{.cmd=0x21},{.cmd=0x11,.delay_ms=120},{.cmd=0x29,.delay_ms=1}},.init_cmds_size=23}}\"'", + "'-D LCD_SWAP_XY=false'", + "'-D LCD_MIRROR_X=true'", + "'-D LCD_MIRROR_Y=false'", + "'-D BOARD_HAS_TOUCH'", + "'-D TOUCH_XPT2046_SPI'", + "'-D XPT2046_SPI_HOST=SPI3_HOST'", + "'-D XPT2046_SPI_DMA_CHANNEL=SPI_DMA_CH_AUTO'", + "'-D XPT2046_SPI_BUS_MOSI_IO_NUM=32'", + "'-D XPT2046_SPI_BUS_MISO_IO_NUM=39'", + "'-D XPT2046_SPI_BUS_SCLK_IO_NUM=25'", + "'-D XPT2046_SPI_BUS_QUADWP_IO_NUM=GPIO_NUM_NC'", + "'-D XPT2046_SPI_BUS_QUADHD_IO_NUM=GPIO_NUM_NC'", + "'-D XPT2046_SPI_CONFIG_CS_GPIO_NUM=33'", + "'-D XPT2046_SPI_CONFIG_DC_GPIO_NUM=GPIO_NUM_NC'", + "'-D XPT2046_SPI_CONFIG_SPI_MODE=SPI_MODE0'", + "'-D XPT2046_SPI_CONFIG_PCLK_HZ=2000000'", + "'-D XPT2046_SPI_CONFIG_TRANS_QUEUE_DEPTH=3'", + "'-D XPT2046_SPI_CONFIG_LCD_CMD_BITS=8'", + "'-D XPT2046_SPI_CONFIG_LCD_PARAM_BITS=8'", + "'-D XPT2046_SPI_CONFIG_FLAGS_DC_AS_CMD_PHASE=false'", + "'-D XPT2046_SPI_CONFIG_FLAGS_DC_LOW_ON_DATA=false'", + "'-D XPT2046_SPI_CONFIG_FLAGS_OCTAL_MODE=false'", + "'-D XPT2046_SPI_CONFIG_FLAGS_LSB_FIRST=false'", + "'-D XPT2046_TOUCH_CONFIG_X_MAX=LCD_WIDTH'", + "'-D XPT2046_TOUCH_CONFIG_Y_MAX=LCD_HEIGHT'", + "'-D XPT2046_TOUCH_CONFIG_RST_GPIO_NUM=GPIO_NUM_NC'", + "'-D XPT2046_TOUCH_CONFIG_INT_GPIO_NUM=36'", + "'-D XPT2046_TOUCH_CONFIG_LEVELS_RESET=0'", + "'-D XPT2046_TOUCH_CONFIG_LEVELS_INTERRUPT=0'", + "'-D TOUCH_SWAP_XY=true'", + "'-D TOUCH_SWAP_X=true'", + "'-D TOUCH_SWAP_Y=false'", + "'-D BOARD_HAS_TF'", + "'-D TF_CS=5'", + "'-D TF_SPI_MOSI=23'", + "'-D TF_SPI_SCLK=18'", + "'-D TF_SPI_MISO=19'", + "'-D BOARD_HAS_RGB_LED'", + "'-D RGB_LED_R=4'", + "'-D RGB_LED_G=16'", + "'-D RGB_LED_B=17'", + "'-D BOARD_HAS_CDS'", + "'-D CDS=34'", + "'-D BOARD_HAS_SPEAK'", + "'-D SPEAK=26'", + + "-DCYD_SCREEN_GAP_PX=8", + "-DCYD_SCREEN_MIN_BUTTON_HEIGHT_PX=35", + "-DCYD_SCREEN_MIN_BUTTON_WIDTH_PX=35", + "-DCYD_SCREEN_FONT=lv_font_montserrat_14", + "-DCYD_SCREEN_FONT_SMALL=lv_font_montserrat_10", + "-DCYD_SCREEN_SIDEBAR_SIZE_PX=40", + "-DCYD_SCREEN_DRIVER_ESP32_SMARTDISPLAY=1" + ], + "f_cpu": "240000000L", + "f_flash": "40000000L", + "flash_mode": "dio", + "mcu": "esp32", + "variant": "esp32" + }, + "connectivity": [ + "wifi", + "bluetooth", + "ethernet", + "can" + ], + "debug": { + "openocd_board": "esp-wroom-32.cfg" + }, + "frameworks": [ + "arduino", + "espidf" + ], + "name": "esp32-2432S028Rv2-SD", + "upload": { + "flash_size": "4MB", + "maximum_ram_size": 327680, + "maximum_size": 4194304, + "require_upload_port": true, + "speed": 460800 + }, + "url": "https://www.aliexpress.com/item/1005004502250619.html", + "vendor": "Sunton" + } \ No newline at end of file diff --git a/CYD-Klipper/boards/esp32-2432S028R-smartdisplay.json b/CYD-Klipper/boards/esp32-2432S028RV3-smartdisplay.json similarity index 99% rename from CYD-Klipper/boards/esp32-2432S028R-smartdisplay.json rename to CYD-Klipper/boards/esp32-2432S028RV3-smartdisplay.json index 19af945..088d369 100644 --- a/CYD-Klipper/boards/esp32-2432S028R-smartdisplay.json +++ b/CYD-Klipper/boards/esp32-2432S028RV3-smartdisplay.json @@ -112,7 +112,7 @@ "arduino", "espidf" ], - "name": "esp32-2432S028Rv3", + "name": "esp32-2432S028Rv3-SD", "upload": { "flash_size": "4MB", "maximum_ram_size": 327680, diff --git a/CYD-Klipper/platformio.ini b/CYD-Klipper/platformio.ini index 617451b..b6dfe46 100644 --- a/CYD-Klipper/platformio.ini +++ b/CYD-Klipper/platformio.ini @@ -43,14 +43,20 @@ lib_deps = bblanchon/ArduinoJson@^7.0.0 plageoj/UrlEncode@^1.0.1 -[env:esp32-3248S035C-SD] -board = esp32-3248S035C-smartdisplay +[env:esp32-2432S028Rv1-SD] +board = esp32-2432S028RV1-smartdisplay -[env:esp32-2432S028R-SD] -board = esp32-2432S028R-smartdisplay +[env:esp32-2432S028Rv2-SD] +board = esp32-2432S028RV2-smartdisplay -[env:esp32-8048S043C-SD] -board = esp32-8048S043C-smartdisplay +[env:esp32-2432S028Rv3-SD] +board = esp32-2432S028RV3-smartdisplay [env:esp32-2432S032C-SD] board = esp32-2432S032C-smartdisplay + +[env:esp32-3248S035C-SD] +board = esp32-3248S035C-smartdisplay + +[env:esp32-8048S043C-SD] +board = esp32-8048S043C-smartdisplay \ No newline at end of file