diff --git a/CYD-Klipper/boards/esp32-4827S043C-smartdisplay.json b/CYD-Klipper/boards/esp32-4827S043C-smartdisplay.json new file mode 100644 index 0000000..06e18ed --- /dev/null +++ b/CYD-Klipper/boards/esp32-4827S043C-smartdisplay.json @@ -0,0 +1,143 @@ +{ + "build": { + "arduino": { + "ldscript": "esp32s3_out.ld", + "partitions": "default_16MB.csv", + "memory_type": "qio_opi" + }, + "core": "esp32", + "extra_flags": [ + "'-D ARDUINO_ESP32S3_DEV'", + "'-D BOARD_HAS_PSRAM'", + "'-D ARDUINO_USB_MODE=1'", + "'-D ARDUINO_RUNNING_CORE=1'", + "'-D ARDUINO_EVENT_RUNNING_CORE=1'", + "'-D ARDUINO_USB_CDC_ON_BOOT=0'", + "'-D ESP32_4827S043C'", + "'-D LCD_WIDTH=480'", + "'-D LCD_HEIGHT=272'", + "'-D LVGL_BUFFER_PIXELS=(LCD_WIDTH*LCD_HEIGHT)'", + "'-D LVGL_BUFFER_MALLOC_FLAGS=(MALLOC_CAP_SPIRAM|MALLOC_CAP_8BIT)'", + "'-D BCKL=2'", + "'-D LCD_ST7262_PAR'", + "'-D ST7262_PANEL_CONFIG_CLK_SRC=LCD_CLK_SRC_PLL160M'", + "'-D ST7262_PANEL_CONFIG_TIMINGS_PCLK_HZ=(8*1000000)'", + "'-D ST7262_PANEL_CONFIG_TIMINGS_H_RES=LCD_WIDTH'", + "'-D ST7262_PANEL_CONFIG_TIMINGS_V_RES=LCD_HEIGHT'", + "'-D ST7262_PANEL_CONFIG_TIMINGS_HSYNC_PULSE_WIDTH=4'", + "'-D ST7262_PANEL_CONFIG_TIMINGS_HSYNC_BACK_PORCH=43'", + "'-D ST7262_PANEL_CONFIG_TIMINGS_HSYNC_FRONT_PORCH=8'", + "'-D ST7262_PANEL_CONFIG_TIMINGS_VSYNC_PULSE_WIDTH=4'", + "'-D ST7262_PANEL_CONFIG_TIMINGS_VSYNC_BACK_PORCH=12'", + "'-D ST7262_PANEL_CONFIG_TIMINGS_VSYNC_FRONT_PORCH=8'", + "'-D ST7262_PANEL_CONFIG_TIMINGS_FLAGS_HSYNC_IDLE_LOW=true'", + "'-D ST7262_PANEL_CONFIG_TIMINGS_FLAGS_VSYNC_IDLE_LOW=true'", + "'-D ST7262_PANEL_CONFIG_TIMINGS_FLAGS_DE_IDLE_HIGH=false'", + "'-D ST7262_PANEL_CONFIG_TIMINGS_FLAGS_PCLK_ACTIVE_NEG=true'", + "'-D ST7262_PANEL_CONFIG_TIMINGS_FLAGS_PCLK_IDLE_HIGH=false'", + "'-D ST7262_PANEL_CONFIG_DATA_WIDTH=16'", + "'-D ST7262_PANEL_CONFIG_SRAM_TRANS_ALIGN=4'", + "'-D ST7262_PANEL_CONFIG_PSRAM_TRANS_ALIGN=64'", + "'-D ST7262_PANEL_CONFIG_HSYNC_GPIO_NUM=39'", + "'-D ST7262_PANEL_CONFIG_VSYNC_GPIO_NUM=41'", + "'-D ST7262_PANEL_CONFIG_DE_GPIO_NUM=40'", + "'-D ST7262_PANEL_CONFIG_PCLK_GPIO_NUM=42'", + "'-D ST7262_PANEL_CONFIG_DATA_GPIO_R0=8'", + "'-D ST7262_PANEL_CONFIG_DATA_GPIO_R1=3'", + "'-D ST7262_PANEL_CONFIG_DATA_GPIO_R2=46'", + "'-D ST7262_PANEL_CONFIG_DATA_GPIO_R3=9'", + "'-D ST7262_PANEL_CONFIG_DATA_GPIO_R4=1'", + "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G0=5'", + "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G1=6'", + "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G2=7'", + "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G3=15'", + "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G4=16'", + "'-D ST7262_PANEL_CONFIG_DATA_GPIO_G5=4'", + "'-D ST7262_PANEL_CONFIG_DATA_GPIO_B0=45'", + "'-D ST7262_PANEL_CONFIG_DATA_GPIO_B1=48'", + "'-D ST7262_PANEL_CONFIG_DATA_GPIO_B2=47'", + "'-D ST7262_PANEL_CONFIG_DATA_GPIO_B3=21'", + "'-D ST7262_PANEL_CONFIG_DATA_GPIO_B4=14'", + "'-D ST7262_PANEL_CONFIG_DISP_GPIO_NUM=GPIO_NUM_NC'", + "'-D ST7262_PANEL_CONFIG_FLAGS_DISP_ACTIVE_LOW=false'", + "'-D ST7262_PANEL_CONFIG_FLAGS_RELAX_ON_IDLE=false'", + "'-D ST7262_PANEL_CONFIG_FLAGS_FB_IN_PSRAM=true'", + "'-D BOARD_HAS_TOUCH'", + "'-D TOUCH_GT911_I2C'", + "'-D GT911_I2C_HOST=0'", + "'-D GT911_I2C_CONFIG_SDA_IO_NUM=19'", + "'-D GT911_I2C_CONFIG_SCL_IO_NUM=20'", + "'-D GT911_I2C_CONFIG_SDA_PULLUP_EN=GPIO_PULLUP_ENABLE'", + "'-D GT911_I2C_CONFIG_SCL_PULLUP_EN=GPIO_PULLUP_ENABLE'", + "'-D GT911_I2C_CONFIG_MASTER_CLK_SPEED=400000'", + "'-D GT911_I2C_CONFIG_CLK_FLAGS=0'", + "'-D GT911_IO_I2C_CONFIG_DEV_ADDR=ESP_LCD_TOUCH_IO_I2C_GT911_ADDRESS'", + "'-D GT911_IO_I2C_CONFIG_CONTROL_PHASE_BYTES=1'", + "'-D GT911_IO_I2C_CONFIG_DC_BIT_OFFSET=0'", + "'-D GT911_IO_I2C_CONFIG_LCD_CMD_BITS=16'", + "'-D GT911_IO_I2C_CONFIG_LCD_PARAM_BITS=0'", + "'-D GT911_IO_I2C_CONFIG_FLAGS_DC_LOW_ON_DATA=false'", + "'-D GT911_IO_I2C_CONFIG_FLAGS_DISABLE_CONTROL_PHASE=true'", + "'-D GT911_TOUCH_CONFIG_X_MAX=LCD_WIDTH'", + "'-D GT911_TOUCH_CONFIG_Y_MAX=LCD_HEIGHT'", + "'-D GT911_TOUCH_CONFIG_RST_GPIO_NUM=38'", + "'-D GT911_TOUCH_CONFIG_INT_GPIO_NUM=18'", + "'-D GT911_TOUCH_CONFIG_LEVELS_RESET=0'", + "'-D GT911_TOUCH_CONFIG_LEVELS_INTERRUPT=0'", + "'-D TOUCH_SWAP_XY=false'", + "'-D TOUCH_SWAP_X=false'", + "'-D TOUCH_SWAP_Y=false'", + "'-D BOARD_HAS_TF'", + "'-D TF_CS=10'", + "'-D TF_SPI_MOSI=11'", + "'-D TF_SPI_SCLK=12'", + "'-D TF_SPI_MISO=13'", + + "'-DCYD_SCREEN_HEIGHT_PX=272'", + "'-DCYD_SCREEN_WIDTH_PX=480'", + "-DROTATION_INVERTED=LV_DISP_ROT_180", + "-DROTATION_NORMAL=LV_DISP_ROT_NONE", + "'-DCYD_SCREEN_GAP_PX=10'", + "'-DCYD_SCREEN_MIN_BUTTON_HEIGHT_PX=35'", + "'-DCYD_SCREEN_MIN_BUTTON_WIDTH_PX=40'", + "'-DCYD_SCREEN_FONT=lv_font_montserrat_16'", + "'-DCYD_SCREEN_FONT_SMALL=lv_font_montserrat_12'", + "'-DCYD_SCREEN_SIDEBAR_SIZE_PX=50'", + "'-DCYD_SCREEN_DRIVER_ESP32_SMARTDISPLAY=1'", + "'-DCYD_SCREEN_DISABLE_TOUCH_CALIBRATION=1'" + ], + "f_cpu": "240000000L", + "f_flash": "80000000L", + "flash_mode": "qio", + "hwids": [ + [ + "0x303A", + "0x1001" + ] + ], + "mcu": "esp32s3", + "variant": "esp32s3" + }, + "connectivity": [ + "wifi" + ], + "debug": { + "openocd_target": "esp32s3.cfg" + }, + "frameworks": [ + "arduino", + "espidf" + ], + "name": "esp32-4827S043C", + "upload": { + "flash_size": "16MB", + "maximum_ram_size": 327680, + "maximum_size": 16777216, + "use_1200bps_touch": true, + "wait_for_upload_port": true, + "require_upload_port": true, + "speed": 460800 + }, + "url": "https://www.aliexpress.com/item/1005004788147691.html", + "vendor": "Sunton" +} \ No newline at end of file diff --git a/CYD-Klipper/platformio.ini b/CYD-Klipper/platformio.ini index b6dfe46..3782ed0 100644 --- a/CYD-Klipper/platformio.ini +++ b/CYD-Klipper/platformio.ini @@ -59,4 +59,7 @@ board = esp32-2432S032C-smartdisplay board = esp32-3248S035C-smartdisplay [env:esp32-8048S043C-SD] -board = esp32-8048S043C-smartdisplay \ No newline at end of file +board = esp32-8048S043C-smartdisplay + +[env:esp32-4827S043C-SD] +board = esp32-4827S043C-smartdisplay \ No newline at end of file