-
Notifications
You must be signed in to change notification settings - Fork 976
Using git repository
To use the Arduino_Core_STM32 git repository instead of the package version, follow those steps:
See the Getting Started page. This will install the required dependencies:
- CMSIS: ARM® Cortex® Microcontroller Software Interface Standard
- arm-none-eabi-gcc: GNU ARM Embedded Toolchain
- STM32Tools: upload tools,...
Go to the installed package directory: Where-are-sources
Delete the version directory: <x.y.z>
Directory of step 2 is now deleted.
In the "<local Arduino directory>/packages/STM32/hardware/stm32/" do the clone:
git clone https://github.com/stm32duino/Arduino_Core_STM32.git <version>
where <version> is the one you delete in step 2.
For this example: 1.1.1
So, do:
git clone https://github.com/stm32duino/Arduino_Core_STM32.git 1.1.1
/img/Tips-icon.png It is possible to clone it elsewhere and create a symlink named <version>
At this step, you are able to build using the git repository but upload is broken.
.../massStorageCopy": error=2, No such file or directory
or
.../stlink_upload": error=2, No such file or directory
Uploader tools path need to be updated in platform.txt at the root of the git repository.
Replace all {runtime.hardware.path} by {runtime.tools.STM32Tools.path}
That's all.
/img/Important-icon.png Uninstalling from the boards managers will remove the git repository!
Go to the "<Arduino install directory>/hardware/" and create a directory named: STM32
/img/Warning-icon.png The name of the new directory to clone into must be STM32!
Go to this new directory then do the clone:
git clone https://github.com/stm32duino/Arduino_Core_STM32.git stm32
/img/Warning-icon.png The name of the new directory to clone into must be stm32!
At this step, you are able to build using the git repository but upload is broken.
.../massStorageCopy": error=2, No such file or directory
or
.../stlink_upload": error=2, No such file or directory
From the same directory clone the Arduino_Tools git repository:
git clone https://github.com/stm32duino/Arduino_Tools.git tools
/img/Warning-icon.png The name of the new directory to clone into must be tools!
So, you should have two directories in \<Arduino install directory\>/hardware/STM32/
stm32 and tools
/img/Note-icon.png If you do not have deleted the stm32 core extracted package (step 2.), in "Tools > Board" menu, you will have twice the "STM32 board" menu.
-
Advanced usages