Snowflake Connector for .NET

The Snowflake .NET connector supports most core functionality. Currently, the PUT and GET commands are not supported. All other query types are supported.

Library target is under .NET Framework 4.6 and .NET Standard 2.0.

Please refer to the Notice section below for information about safe usage of the .NET Driver

Building the Package

Prerequisites

This project is developed under Visual Studio 2017. All other versions of Visual Studio are not supported.

Steps

Check out the source code from GitHub:

git clone git@github.com:snowflakedb/snowflake-connector-net snowflake-connector-net

Pull down the dependency:

cd snowflake-connector-net
nuget restore

Build the solution file

msbuild snowflake-connector-net.sln /p:Configuration=Release

Installing the Package

Package ID for Snowflake Connector for .Net is Snowflake.Data.

Packages can be directly downloaded from nuget.org.

It can also be downloaded using Visual Studio UI (Tools > NuGet Package Manager > Manage NuGet Packages for Solution and search for "Snowflake.Data")

Alternatively, packages can also be downloaded using Package Manager Console:

PM> Install-Package Snowflake.Data

Testing the Connector

Before running tests, create a parameters.json file under Snowflake.Data.Tests\ directory. In this file, specify username, password and account info that tests will run against. Here is a sample parameters.json file

{
  "testconnection": {
    "SNOWFLAKE_TEST_USER": "snowman",
    "SNOWFLAKE_TEST_PASSWORD": "XXXXXXX",
    "SNOWFLAKE_TEST_ACCOUNT": "TESTACCOUNT",
    "SNOWFLAKE_TEST_WAREHOUSE": "TESTWH",
    "SNOWFLAKE_TEST_DATABASE": "TESTDB",
    "SNOWFLAKE_TEST_SCHEMA": "TESTSCHEMA",
    "SNOWFLAKE_TEST_ROLE": "TESTROLE",
    "SNOWFLAKE_TEST_HOST": "testaccount.snowflakecomputing.com"
  }
}

Command Prompt

The build solution file builds the connector and tests binaries. Issue the following command from the command line to run the tests. The test binary is located in the Debug directory if you built the solution file in Debug mode.

cd Snowflake.Data.Tests
dotnet test -f netcoreapp2.0

Tests can also be run under code coverage:

OpenCover.4.6.519\tools\OpenCover.Console.exe -target:"dotnet.exe" -returntargetcode -targetargs:"test -f netcoreapp2.0" -register:user -filter:"+[Snowflake.Data]*" -output:"netcoreapp2.0_coverage.xml" -oldStyle

Visual Studio 2017

Tests can also be run under Visual Studio 2017. Open the solution file in Visual Studio 2017 and run tests using Test Explorer.

Usage

Create a Connection

To connect to Snowflake, specify a valid connection string composed of key-value pairs separated by semicolons, i.e "<key1>=<value1>;<key2>=<value2>...".

Note: If the keyword or value contains an equal sign (=), you must precede the equal sign with another equal sign. For example, if the keyword is "key" and the value is "value_part1=value_part2", use "key=value_part1==value_part2".

The following table lists all valid connection properties:

Connection Property	Required	Comment
ACCOUNT	Yes	Account should not include region or cloud provider information. e.g. account should be XXX instead of XXX.us-east-1.
DB	No
HOST	No	If no value is specified, the driver uses <ACCOUNT>.snowflakecomputing.com. However, if you are not in us-west deployment, or you want to use global url, HOST is required, e.g. XXX.us-east-1.snowflakecomputing.com, or XXX-jkabfvdjisoa778wqfgeruishafeuw89q.global.snowflakecomputing.com
PASSWORD	Depends	Required if AUTHENTICATOR is set to `snowflake` (the default value) or the URL for native SSO through Okta. Ignored for all the other authentication types.
ROLE	No
SCHEMA	No
USER	Yes	If AUTHENTICATOR is set to `externalbrowser` or the URL for native SSO through Okta, set this to the login name for your identity provider (IdP).
WAREHOUSE	No
CONNECTION_TIMEOUT	No	Total timeout in seconds when connecting to Snowflake. Default to 120 seconds
AUTHENTICATOR	No	The method of authentication. Currently supports the following values: - snowflake (default): You must also set USER and PASSWORD. - the URL for native SSO through Okta: You must also set USER and PASSWORD. - externalbrowser: You must also set USER. - snowflake_jwt: You must also set PRIVATE_KEY_FILE or PRIVATE_KEY. - oauth: You must also set TOKEN.
VALIDATE_DEFAULT_PARAMETERS	No	Whether DB, SCHEMA and WAREHOUSE should be verified when making connection. Default to be true.
PRIVATE_KEY_FILE	Depends	The path to the private key file to use for key-pair authentication. Must be used in combination with AUTHENTICATOR=snowflake_jwt
PRIVATE_KEY_PWD	No	The passphrase to use for decrypting the private key, if the key is encrypted.
PRIVATE_KEY	Depends	The private key to use for key-pair authentication. Must be used in combination with AUTHENTICATOR=snowflake_jwt. If the private key value includes any equal signs (=), make sure to replace each equal sign with two signs (==) to ensure that the connection string is parsed correctly.
TOKEN	Depends	The OAuth token to use for OAuth authentication. Must be used in combination with AUTHENTICATOR=oauth.

The following example demonstrates how to open a connection to Snowflake. This example uses a password for authentication.

using (IDbConnection conn = new SnowflakeDbConnection())
{
    conn.ConnectionString = "account=testaccount;user=testuser;password=XXXXX;db=testdb;schema=testschema";

    conn.Open();
    
    conn.Close();
}

If you are using a different method for authentication, see the examples below:

Key-pair authentication

After setting up key-pair authentication, you can specify the private key for authentication in one of the following ways:

Specify the file containing an unencrypted private key:

using (IDbConnection conn = new SnowflakeDbConnection())
{
    conn.ConnectionString = "account=testaccount;authenticator=snowflake_jwt;user=testuser;private_key_file={pathToThePrivateKeyFile};db=testdb;schema=testschema";

    conn.Open();

    conn.Close();
}

where:

{pathToThePrivateKeyFile} is the path to the file containing the unencrypted private key.

Specify the file containing an encrypted private key:

using (IDbConnection conn = new SnowflakeDbConnection())
{
    conn.ConnectionString = "account=testaccount;authenticator=snowflake_jwt;user=testuser;private_key_file={pathToThePrivateKeyFile};private_key_pwd={passwordForDecryptingThePrivateKey};db=testdb;schema=testschema";

    conn.Open();

    conn.Close();
}

where:

{pathToThePrivateKeyFile} is the path to the file containing the unencrypted private key.
{passwordForDecryptingThePrivateKey} is the password for decrypting the private key.

Specify an unencrypted private key (read from a file):

using (IDbConnection conn = new SnowflakeDbConnection())
{
    string privateKeyContent = File.ReadAllText({pathToThePrivateKeyFile}).Replace("=", "==");

    conn.ConnectionString = String.Format("account=testaccount;authenticator=snowflake_jwt;user=testuser;private_key={0};db=testdb;schema=testschema", privateKeyContent);

    conn.Open();

    conn.Close();
}

where:

{pathToThePrivateKeyFile} is the path to the file containing the unencrypted private key.

OAuth

After setting up OAuth, set AUTHENTICATOR=oauth and TOKEN to the OAuth token in the connection string.

using (IDbConnection conn = new SnowflakeDbConnection())
{
    conn.ConnectionString = "account=testaccount;user=testuser;authenticator=oauth;token={oauthTokenValue};db=testdb;schema=testschema";

    conn.Open();
  
    conn.Close();
}

where:

{oauthTokenValue} is the oauth token to use for authentication.

Browser-based SSO

In the connection string, set AUTHENTICATOR=externalbrowser, and set USER to the login name for your IdP.

using (IDbConnection conn = new SnowflakeDbConnection())
{
    conn.ConnectionString = "account=testaccount;authenticator=externalbrowser;user={login_name_for_IdP};db=testdb;schema=testschema";

    conn.Open();

    conn.Close();
}

where:

{login_name_for_IdP} is your login name for your IdP.

Native SSO through Okta

In the connection string, set AUTHENTICATOR to the URL of the endpoint for your Okta account, and set USER to the login name for your IdP.
```
using (IDbConnection conn = new SnowflakeDbConnection())
{
    conn.ConnectionString = "account=testaccount;authenticator={okta_url_endpoint};user={login_name_for_IdP};db=testdb;schema=testschema";

    conn.Open();

    conn.Close();
}
```
where:
- {okta_url_endpoint} is the URL for the endpoint for your Okta account (e.g. https://<okta_account_name>.okta.com).
- {login_name_for_IdP} is your login name for your IdP.

Run a Query and Read Data

using (IDbConnection conn = new SnowflakeDbConnection())
{
    conn.ConnectionString = connectionString;
    conn.Open();

    IDbCommand cmd = conn.CreateCommand();
    cmd.CommandText = "select * from t";
    IDataReader reader = cmd.ExecuteReader();

    while(reader.Read())
    {
        Console.WriteLine(reader.GetString(0));
    }

    conn.Close();
}

Bind Parameter

using (IDbConnection conn = new SnowflakeDbConnection())
{
    conn.ConnectionString = connectionString;
    conn.Open();

    IDbCommand cmd = conn.CreateCommand();
    cmd.CommandText = "insert into t values (?),(?),(?)";

    var p1 = cmd.CreateParameter();
    p1.ParameterName = "1";
    p1.Value = 10;
    p1.DbType = DbType.Int32;
    cmd.Parameters.Add(p1);

    var p2 = cmd.CreateParameter();
    p2.ParameterName = "2";
    p2.Value = 10000L;
    p2.DbType = DbType.Int32;
    cmd.Parameters.Add(p2);

    var p3 = cmd.CreateParameter();
    p3.ParameterName = "3";
    p3.Value = (short)1;
    p3.DbType = DbType.Int16;
    cmd.Parameters.Add(p3);

    var count = cmd.ExecuteNonQuery();
    Assert.AreEqual(3, count);

    conn.Close();
}

Logging

The Snowflake Connector for .NET uses log4net as the logging framework.

Here is a sample app.config file that uses log4net

  <configSections>
    <section name="log4net" type="log4net.Config.Log4NetConfigurationSectionHandler, log4net"/>
  </configSections>

  <log4net>
    <appender name="MyRollingFileAppender" type="log4net.Appender.RollingFileAppender">
      <file value="snowflake_dotnet.log" />
      <appendToFile value="true"/>
      <rollingStyle value="Size" />
      <maximumFileSize value="10MB" />
      <staticLogFileName value="true" />
      <maxSizeRollBackups value="10" />
      <layout type="log4net.Layout.PatternLayout">
        <!-- <header value="[DateTime]  [Thread]  [Level]  [ClassName] Message&#13;&#10;" /> -->
        <conversionPattern value="[%date] [%t] [%-5level] [%logger] %message%newline" />
      </layout>
    </appender>

    <root>
      <level value="ALL" />
      <appender-ref ref="MyRollingFileAppender" />
    </root>
  </log4net>

Notice

CVE-2019-0820 -
This CVE has been reported in systems.text.regularexpressions.dll which is used by the regular expressions packages - systems.text.regularexpressions.4.3.1.nupkg. This vulnerability manifests itself ONLY when the following .NET runtime environments are being used:

v1.0 branch: 1.0 - 1.0.16 (exclusive)
v1.1 branch: 1.1 - 1.1.13 (exclusive)
v2.1 branch: 2.1 - 2.1.11 (exclusive)
v2.2 branch: 2.2 - 2.2.5 (exclusive)

In order to mitigate this vulnerability, we recommend to update to higher Runtime versions. If you're already running on a .NET Runtime version higher than the ones listed above, you're not going to be affected by this vulnerability.

Logging -
Snowflake has identified an issue on Feb 20, 2020, with our logging code for the .NET drivers in which we write Master and Session tokens in the clear to the debug logs. The debug logs are collected locally on the drive where your programs are running. This issue impacts only those instances where the programs are run with debug flags enabled, i.e. setting the log level value= "Debug” or “All" in the log4Net config

Under normal conditions, the Master and Session tokens captured in the log files are short-lived for about 4 and 1 hours, respectively. They will expire after the 4-hour window unless explicitly refreshed, in which case they could be refreshed indefinitely.

If you are using the .NET driver please take the following action:

Upgrade to the latest version(v1.1.0) as soon as possible.
Remove all “Debugging” options for any existing .NET drivers in use.
Delete any logs collected thus far and make sure that all copies are deleted.
If you cannot upgrade for any reason, please ensure all debugging is disabled
If you are concerned about a potential compromise, contact Snowflake Customer Support for assistance with invalidating all active sessions/tokens.

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README.md

README.md

Snowflake Connector for .NET

Building the Package

Prerequisites

Steps

Installing the Package

Testing the Connector

Command Prompt

Visual Studio 2017

Usage

Create a Connection

Run a Query and Read Data

Bind Parameter

Logging

Notice

Files

README.md

Latest commit

History

README.md

File metadata and controls

Snowflake Connector for .NET

Building the Package

Prerequisites

Steps

Installing the Package

Testing the Connector

Command Prompt

Visual Studio 2017

Usage

Create a Connection

Run a Query and Read Data

Bind Parameter

Logging

Notice