-
Notifications
You must be signed in to change notification settings - Fork 12
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Configure the 5GSniffer to capture IQ samples using a "specific" SDR #1
Comments
hello, i have also been trying to achieve the same thing by making some changes to the src file and rebuilding the project, however, i aim at getting the sniffer top operate at a different frequency other than the default 627750000 specified in the config file. however, upon rebuilding the program, the sdr still runs at 627750000 regardless of the frequency set any info on what could be wong would be helpful. Please find my config.h file, main.cc, spritelab and sdr.cc files below |
Hello, Sorry for the late response and thank you for the interest in the sniffer. I will add this feature soon. I will add an additional parameter "rf_args" to specify the USRP, e.g. "rf_args = "type=b200,master_clock_rate=23.04e6"" As for how to set the frequency using SDR, you should only modify the .toml file, specifically the "frequency" parameter. I am currently working on a guide on the config file and some additional details. Best, |
Hi ivyselly, It is hard to tell what could be happening just from that screenshot. Usually you should see the message "Got MIB", which means the sniffer was able to synchronize using PSS and SSS, and decode the MIB. This is the first step of the sniffer. If you are not able to retrieve the MIB it could be due to bad signal quality, using a wrong center frequency... I would suggest first taking a small recording, e.g. 3 seconds, and checking the spectrum, you should see the 5G SSB signal in the spectrum. Best, |
@NorbLd please can you confirm what tool you used for capturing and spectrum analysis of your signals, i'm using the srsran usrp_capture tool, and i also use gnu radio for spectrum analysis. |
Hi, I generally use the gnu radio tool uhd_rx_cfile. An example: uhd_rx_cfile --args type=b200 -r 23040000 -f 627500000 /tmp/file.fc32x If you want you can send me your recording over email so I can take a look at it. |
Alright, i will send you a mail. Thank you |
Hello, is this command listening for data from the bypass UE or listening for UE data connected to the USRP?thank you! |
Hi,
Issue Description
I can not find a way to set the "device" and "args" to capture RF IQ samples using a desired SDR.
Setup Details
In my setup I have configured the .toml file as follows:
IQ.toml
Expected Behavior
I would like to know if I can use some args configuration and serial to select one from all the SDRs connected to the machine.
Actual Behaviour
If the file path is commented the 5GSniffer automatically tries to use the SDR, in my case USRP X310.
Thanks in advance.
The text was updated successfully, but these errors were encountered: