Sessions open but never seem to finish

[FM-Guy]

I've uploaded the 4 files as in the instructions, created a config and run the tests. I've started them in the early evening and the next morning there's no indication that they've finished. No end time or results.

This is on a 16 core VM @3.2GHZ with 64GB ram running FM 19.6.2 and Windows 2019 Datacenter.

This at an American data center so it would be American dates.
Also for security reasons the server is not allowed to access the internet. I looked through one of the scripts and see it's doing a Insert from URL to an IP address. Could this be the problem?

[wimdecorte]

This script uses a well-known AWS endpoint to identify the EC2 instance. It should work without internet access so I doubt that is the issue. [image: image.png] When you start the test run, it should show a countdown on the client and then give some feedback as to what run it is running. Did it not do that? Can you show a screenshot of your test run config and what window it shows when you start the run?

…

On Fri, Mar 17, 2023 at 10:50 AM FM-Guy ***@***.***> wrote: I've uploaded the 4 files as in the instructions, created a config and run the tests. I've started them in the early evening and the next morning there's no indication that they've finished. No end time or results. This is on a 16 core VM @3.2GHZ with 64GB ram running FM 19.6.2 and Windows 2019 Datacenter. This at an American data center so it would be American dates. Also for security reasons the server is not allowed to access the internet. I looked through one of the scripts and see it's doing a Insert from URL to an IP address. Could this be the problem? — Reply to this email directly, view it on GitHub <#7>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ABGKIFYL566TA4YAEN6QW33W4R23BANCNFSM6AAAAAAV6UEZ4M> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

-- www.connectingdata.com Canadian Anti-Spam Legislation (CASL <http://fightspam.gc.ca/>) - kindly give us your consent to communicate by email: casl.connectingdata.com You can always revoke your consent by opting out <http://www.connectingdata.com/phplist/?p=unsubscribe&id=1> or by sending an email to ***@***.***

[FM-Guy]

Thanks for your reply. Hopefully these are the screen shots you’re requesting. You can see on the sessions window I started it running a couple days ago and it still hasn’t returned an end time. Regards Brian

…

On Mar 17, 2023, at 2:51 PM, Wim Decorte ***@***.***> wrote: This script uses a well-known AWS endpoint to identify the EC2 instance. It should work without internet access so I doubt that is the issue. [image: image.png] When you start the test run, it should show a countdown on the client and then give some feedback as to what run it is running. Did it not do that? Can you show a screenshot of your test run config and what window it shows when you start the run? On Fri, Mar 17, 2023 at 10:50 AM FM-Guy ***@***.***> wrote: > I've uploaded the 4 files as in the instructions, created a config and run > the tests. I've started them in the early evening and the next morning > there's no indication that they've finished. No end time or results. > > This is on a 16 core VM @3.2GHZ with 64GB ram running FM 19.6.2 and > Windows 2019 Datacenter. > > This at an American data center so it would be American dates. > Also for security reasons the server is not allowed to access the > internet. I looked through one of the scripts and see it's doing a Insert > from URL to an IP address. Could this be the problem? > > — > Reply to this email directly, view it on GitHub > <#7>, or > unsubscribe > <https://github.com/notifications/unsubscribe-auth/ABGKIFYL566TA4YAEN6QW33W4R23BANCNFSM6AAAAAAV6UEZ4M> > . > You are receiving this because you are subscribed to this thread.Message > ID: ***@***.***> > -- www.connectingdata.com Canadian Anti-Spam Legislation (CASL <http://fightspam.gc.ca/>) - kindly give us your consent to communicate by email: casl.connectingdata.com You can always revoke your consent by opting out <http://www.connectingdata.com/phplist/?p=unsubscribe&id=1> or by sending an email to ***@***.*** — Reply to this email directly, view it on GitHub <#7 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AG7OMPIA3JGBNECHOK5LF6DW4SXCBANCNFSM6AAAAAAV6UEZ4M>. You are receiving this because you authored the thread.

[wimdecorte]

No screenshots have shown up.
Can you confirm by the FMS admin console that your sessions there are still running? You should see something like this:

[FM-Guy]

Hi Wim, You did not receive the screen shots I sent previously? I tried running again. The session_list layout came up and started the 2 minute countdown that I set. While the countdown was running a session showed up in the admin console. When the countdown ended and the message changed to “Sessions still running the server…” the session disappeared out of the admin console. It still says “Sessions still running the server…” and there is no end time. I’ve previously left it for more than 24 hours and never get an end time. Here’s the screen caps again. Different image format.

…

On Mar 18, 2023, at 2:37 PM, Wim Decorte ***@***.***> wrote: No screenshots have shown up. Can you confirm by the FMS admin console that your sessions there are still running? You should see something like this: <https://user-images.githubusercontent.com/5022743/226129409-d0d5a2ba-4684-457c-9783-7b13939efaa1.png> — Reply to this email directly, view it on GitHub <#7 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AG7OMPPSG2AV5JKHE5M3NRDW4X6GVANCNFSM6AAAAAAV6UEZ4M>. You are receiving this because you authored the thread.

[wimdecorte]

Your screenshots are still not coming in. Are you adding them by email? If so, try to add them in the browser, on the ticket.

As per my screenshot: you should always see 1 session that says Pro: that's your copy of FM Pro that has the Punisher file open. Running the tests should spawn the # of FMSE (server-side scripting) sessions that you configured.

[FM-Guy]

I was sending them by email.
As you can see, there was no time_end and I didn't see any sessions in the admin console. However, I didn't look at the time I ran the test. I looked a couple hours later when the tests didn't complete.