config.yaml.in

# The resolution section defines an intranet_code
# If this code is retrieved in the request params, then
# the first section (intranet_resolution) is applied for the
# extraction of the LAS points.
#
# max_line_distance: maximum line length given in meters
# buffer_size: buffer around the line used given in meters

resolution:
    - intranet_code: ${intranet_code}
    - name: intranet_resolution
      max_line_distance: 10000
      buffer_size: 1
    - name: internet_resolution
      max_line_distance: 10000
      buffer_size: 1

# timeout give the maximal processing time before the application
# replies with a timeout error. This avoids server overloads.
# The value has to be given in seconds.

timeout: 10

# LIDAR classes configuration

classes_names_standard:
  0.0: never_classified
  1.0: Unclassified
  2.0: Ground
  3.0: Low_Vegetation_2010
  5.0: High_Vegetation_2010
  6.0: Building_2010
  7.0: Low_Point
  8.0: Model_Key_point
  9.0: Water_2010
  10.0: ASPRS_Reserved
  11.0: ASPRS_Reserved
  12.0: Overlap
  13.0: Cars
  14.0: Cranes
  15.0: Aerial_Lines
  16.0: Noise

classes_names_normalized:
  0.0: Vegetation_2001
  1.0: Buildings_2001
  2.0: Ground
  3.0: Low_Vegetation_2010
  5.0: High_Vegetation_2010
  6.0: Building_2010
  7.0: Low_Point
  8.0: Model_Key-point
  9.0: Water_2010
  10.0: ASPRS_Reserved
  11.0: ASPRS_Reserved
  12.0: Overlap
  13.0: Cars_2010
  14.0: Aerial_Lines_2010
  15.0: Crane_2010

kml_colors:
  0.0: black.png
  1.0: black.png
  2.0: gray.png
  3.0: green.png
  4.0: green.png
  5.0: green.png
  6.0: gray.png
  7.0: red.png
  8.0: red.png
  9.0: blue.png
  10.0: black.png
  11.0: black.png
  12.0: yellow.png
  13.0: orange.png
  14.0: yellow.png
  15.0: yellow.png
  16.0: yellow.png