Skip to content

Latest commit

 

History

History
139 lines (91 loc) · 7.63 KB

README.md

File metadata and controls

139 lines (91 loc) · 7.63 KB
Raw

Silicon Labs

Silicon Labs Matter

Welcome to the Silicon Labs Matter Extension repo. Matter is an application layer that provides a standardized interface between protocols and devices. With Matter, it is transparent to the underlying device whether the interaction is from a Thread application or a Wi-Fi application. For more information on Matter in general see the main Matter Overview page. Silicon Labs supports Matter on both 802.15.4 (Thread) and 802.11 (Wi-Fi) transport protocols.

Silicon Labs supports Matter on several different hardware platforms including the EFR32, RS9116, WF200 and the new SiWx917 which is a Wi-Fi System-on-Chip (SoC).

This repo is intended to be used directly for bleeding edge development that closely tracks the CSA Matter codebase. If you are interested in a stable release, we recommend following our official documentation which can be found on docs.silabs.com

To see official release notes containing list of features and known issues go to SiliconLabs/matter_extension/releases and find the corresponding notes for the release you are using.

Setting up the Matter Extension repository

  1. Fork the Silicon Labs Matter Extension GitHub repo by clicking "Fork" in the web UI https://github.com/SiliconLabsSoftware/matter_extension .

  2. Clone your fork of the Silicon Labs Matter Extension GitHub https://github.com/<user-name>/matter_extension

  3. Configure the upstream alias:

    git remote add upstream [email protected]:/SiliconLabsSoftware/matter_extension.git

Your local repo is now ready for development. Follow the rest of this document for instructions on how to create and build a project.

Additional setup required for contributing to this repo (not enabled yet): Contributing

Steps for directly cherry-picking CSA Matter repo commits into your environment: Cherry-picking CSA Commits

Getting Started with Command Line Development

We provide a set of scripts to set up an environment and build Matter apps in a command line. Silicon Labs Matter leverages an internal tool called Silicon Labs Configurator Command-line Interface (SLC-CLI). SLC-CLI comes pre-integrated in the Simplicity Studio, and is automatically installed by the scripts discussed below; it can be manually installed from here: SLC-CLI download. This repo can also be used in the Silicon Labs proprietary IDE Simplicity Studio.

Setting up the Environment

Install the following python packages:

pip3 install dload
pip3 install python-dotenv

The sl_setup_env.py script creates an .env file which contains all the relevant virtual environment paths to be use by sl_create_new_app.py and sl_build.py scripts. The file is not meant to be used directly and is mentioned here only for reference.

It will also create environment_variables_vscode.txt. This file can be referenced to add environment variables for VS Code based builds.

python3 slc/sl_setup_env.py

Creating an Application Project

Run the sl_create_new_app.py script to create a BRD4187C project with name MyNewApp starting from the lighting-app-thread.slcp example

python3 slc/sl_create_new_app.py MyNewApp slc/sample-app/lighting-app/efr32/lighting-app-thread.slcp brd4187c

Building an Application Project

After a project is created the sl_build.py script can be used to re-generate the MyNewApp project and build it:

python3 slc/sl_build.py MyNewApp/lighting-app-thread.slcp brd4187c

Modifying an Application Project

The resulting user project can be modified like any other SLC project. Software components can be added or removed by modifying the project's .slcp file, configuration can be applied by modifying the files in the config directory, the application logic can be managed through the files in the src directory. Various SLC-CLI commands can be used to examine, validate, or re-generate the project after a modification, see Software Project Generation and Configuration with SLC-CLI for more information.

Adding/Removing Components in an Application Project

Users can add/remove components from a project's .slcp file to enable/disable particular features. To add a component users need to add following lines in the .slcp under the component: section:

- {from: matter, id: <component_id>}

Adding/Removing Matter Clusters in an Application Project

To add a new Matter cluster, the cluster must be enabled in the ZAP tool and the respective cluster component must be added to the .slcp file. For modifying Matter endpoints and clusters invoke the ZAP tool passing to it the application's ZAP file:

python3 slc/sl_run_zaptool.py MyNewApp/config/common/lighting-thread-app.zap

Once the cluster is enabled in the ZAP tool and the file is saved the corresponding component must be added to the project's .slcp file. The component IDs for the cluster components can be found in src/app/zap-templates/cluster-to-component-dependencies.json. A cluster component mapping is written in following pattern:

  {
    "clusterCode": "Cluster Code",
    "value": [
      "%extension-matter%<component_id>"
    ]
  }

For example to enable the "level control-server cluster" the user should enable the cluster in the .zap file in the ZAP tool and then add the matter_level_control component to the project's .slcp file:

- {from: matter, id: matter_level_control}

The relevant entry from src/app/zap-templates/cluster-to-component-dependencies.json:

  {
    "clusterCode": "level control-server",
    "value": [
      "%extension-matter%matter_level_control"
    ]
  }

More details on how to develop using SLC CLI can be found at Creating Matter Applications using SLC CLI

Getting Started with Simplicity Studio Development

Matter Extension official releases are available to install through Simplicity Studio out of the box. For bleeding edge Matter codebase, this repo can be manually loaded as a custom Extension to the Simplicity SDK in Simplicity Studio.

To stage the Extension for loading it in Studio invoke the following script passing to it the path to some temporary directory (the directory can be safely removed once the Extension is loaded in Studio).

python3 slc/stage_extension.py <any/location/on/disk>

To load a custom Matter Extension in Studio, navigate to Preferences -> Simplicity Studio -> SDKs -> Add Extension. Navigate to the directory where the extension was staged, and click Open -> OK -> Apply and Close.
Note: In general, this repo supports the latest Simplicity SDK version. To confirm if you have the appropriate version, check the matter.slce file. Note: Matter requires an up-to-date version of the ZAP tool. To make sure that your Studio installation has the most recent ZAP follow these steps to trigger the Studio update: In Studio->Help click on Update Software. In the the Installation Manager screen click Update All; the Studio will restart after the update is finished. After a ZAP update the existing Matter projects must be re-generated by clicking "Force Generation" in the project window menu.

License

Matter is released under the Apache 2.0 license.