Releases: seud0nym/tch-gui-unhide
Releases · seud0nym/tch-gui-unhide
2022.12.07
Changes
tch-gui-unhide
- Added DNS Rebind Protection configuration
- Old handling for different Mobile card sequencing between 17.2 and later firmware removed and simplified as could cause duplicate Mobile cards (#119)
- Errors are no longer silently ignored when setting LAN configuration options in bridged mode (#113)
- Improved display of selected options before installation
- Install messages now have line numbers in addition to install script to facilitate error resolution
- Updated tproxy-go executables with architecture specific versions (v2022.10.29-2-gb3ecf44)
Download Statistics
2022.11.30
Changes
tch-gui-unhide
- Fixed xDSL card not showing on vDSL connection (except FW 20.4 - no support for xDSL configuration at all)
- Fixed incorrect xDSL status and missing statistics on Broadband screen (FW 20.4)
- Fixed adding static leases (broken by variable name change in release 2022.11.01)
- Fixed handling of disabled radios on Wireless card
- Fixed multiple IPv6 addresses overflowing on Local Network card (again)
- Fixed LAN gateway not assigned via DHCP (#113)
- Fixed IP address in content and printer sharing URLs when LAN IP assigned via DHCP (#113)
- Fixed display issue in static leases when MAC address has been assigned multiple IP addresses
- Fixed Internet Access card showed Broadband down on static connection because xDSL configuration removed in FW 20.4 (#117)
- Sorted MAC address drop down list in hostname order when adding static lease
- Added modified xDSL screen and supporting transformer mapping from tch-nginx-gui (except FW 20.4 - no support for xDSL configuration at all)
- Added Datapump version and DSLAM Chipset/Version to xDSL card
- Removed duplicated calculations and optimised Broadband xDSL snippet
- Removed xDSL card and associated installation processing on FW 20.4 because there is no configuration support (#117)
- Removed Switch Active Bank button from System Extras screen on FW 20.4 because there is no transformer support for that option
- Allow static leases to be defined on Guest and other LAN interfaces (but you can only assign one static lease per MAC address)
- Restored Device Bandwidth Monitor, even though it is unreliable. (#115)
- Added IPv6 DUID and Host ID to static leases
- Allow WAN IPv6 to be set by Router Advertisement only (do not request address from DHCPv6) (#117)
- Added incompatibility warnings and handling for WAN Sensing when using a static IP connection (#117)
de-telstra
- Fixed Wi-Fi and EasyMesh service configuration on FW 20.4
- Fixed QoS rules not committed after removing Guest Wi-Fi on FW 20.4
- Improved detection of configuration update failures
guest-restore
- New script to restore the Guest Wi-Fi SSIDs, firewall rules/zones, and guest networks if they were removed using the de-telstra -G option
reset-to-factory-defaults-with-root
- Fixed bugs in .rbi firmware handling
- Inverted check on mtd verify to look for success rather than failure
safe-firmware-upgrade
- Fixed bugs in .rbi firmware handling
- Inverted check on mtd verify to look for success rather than failure
- Fixed "Failed to parse json data: unexpected end of data" error when no internet connection
Download Statistics
2022.11.28
Changes
tch-gui-unhide
- Fixed display issue in static leases when MAC address has been assigned multiple IP addresses
- Sorted MAC address drop down list when adding static lease in hostname order
- Added IPv6 DUID and Host ID to static leases
- Allow WAN IPv6 to be set by Router Advertisement only (do not request address from DHCPv6) (#117)
Download Statistics
2022.11.21
Changes
tch-gui-unhide
- Fixed multiple IPv6 addresses overflowing on Local Network card (again)
- Fixed LAN gateway not assigned via DHCP (#113)
- Fixed IP address in content and printer sharing URLs when LAN IP assigned via DHCP (#113)
reset-to-factory-defaults-with-root
- Fixed bugs in .rbi firmware handling
- Inverted check on mtd verify to look for success rather than failure
safe-firmware-upgrade
- Fixed bugs in .rbi firmware handling
- Inverted check on mtd verify to look for success rather than failure
- Fixed "Failed to parse json data: unexpected end of data" error when no internet connection
Download Statistics
2022.11.16
Changes
All changes from 2022.11.03, 2022.11.04, 2022.11.07 and 2022.11.10 plus:
tch-gui-unhide
- Fixed handling of disabled radios on Wireless card
- Restored Device Bandwidth Monitor, even though it is unreliable. (#115)
de-telstra
- Fixed Wi-Fi and EasyMesh service configuration on FW 20.4
- Fixed QoS rules not committed after removing Guest Wi-Fi on FW 20.4
- Improved detection of configuration update failures
guest-restore
- New script to restore the Guest Wi-Fi SSIDs, firewall rules/zones, and guest networks if they were removed using the de-telstra -G option
Download Statistics
2022.11.10
Changes
All changes from 2022.11.03, 2022.11.04 and 2022.11.07 plus:
tch-gui-unhide
- Allow static leases to be defined on Guest and other LAN interfaces (but you can only assign one static lease per MAC address)
Download Statistics
2022.11.07
Changes
All changes from 2022.11.03 and 2022.11.04 plus:
tch-gui-unhide
- Fixed adding static leases (broken by variable name change in 2022.11.01)
- Removed Switch Active Bank button from System Extras screen on FW 20.4 because there is no transformer support for that option
Download Statistics
2022.11.04
Changes
All changes from 2022.11.03 plus:
tch-gui-unhide
- Fixed incorrect xDSL status and missing statistics on Broadband screen (FW 20.4)
Download Statistics
2022.11.03
Changes
tch-gui-unhide
- Fixed xDSL card not showing on vDSL connection
- Added modified xDSL screen and supporting transformer mapping from tch-nginx-gui
- Added Datapump version and DSLAM Chipset/Version to xDSL card
- Removed duplicated calculations and optimised Broadband xDSL snippet
Download Statistics
2022.11.01
Changes
tch-gui-unhide
- Allow Local Network IPv4 address to be provided by DHCP when in Bridged mode (#113)
- Fixed multiple IPv6 addresses overflowing on Local Network card
- Fixed bug in DSCP handling on QoS Labels tab
- Fixed bug in handling of errors when editing bandwidth-shaped devices in QoS (#114)
- Debugging now enabled by default in pre-releases
- Fixed layout issues in FW 20.4.0428
- Fixed Wi-Fi Booster count in FW 20.4.0428
- Fixed Devices screen in FW 20.4.0428
- Fixed tch-gui-unhide text colour in landing screen in FW 20.4.0428
- Updated tproxy-go to v2022.10.29-0-g95c0329
mtd-backup
- Added version to backup image file name for bootfs1/2 partitions (Smart Modem Gen 3)
mtd-restore
- Added new -b option to swap the banks when restoring firmware bank partitions (e.g. if restoring bank_1, write it into bank_2)
- Added new --dry-run option to show the commands to be executed instead of actually running them
reset-to-factory-defaults-with-root
- Port forwarding rules were incorrectly restored with proto config specified as an option rather than a list
- Added -D option to add a DNS rewrite for the specified domain to disable firmware downloads through CWMP
- Added -d option as a shortcut for disabling Telstra firmware downloads (instead of using -D)
- Added -l option to configure logging to a remote syslog server on the specified IP address and port
- Added -h option to set hostname
safe-firmware-upgrade
- Port forwarding rules were incorrectly restored with proto config specified as an option rather than a list
- Added -D option to add a DNS rewrite for the specified domain to disable firmware downloads through CWMP
- Added -d option as a shortcut for disabling Telstra firmware downloads (instead of using -D)
- Added -l option to configure logging to a remote syslog server on the specified IP address and port
- Added -h option to set hostname
- Improved detection of updated dependency
show-bank-plan
- Now indicates if the booted firmware is vulnerable to tch-exploit or not
Download Statistics
