Altitude Selector and V/S knob Stuck/not working with Logitech/Saitek Multipanel [Spad.Next Simconnect cOnnor Profile]

[rasyidkrm]

Version

Development 97ec3f2

Describe the bug

This is just an Info to help others in case they have the same issue. I am using the Multipanel (MP) Saitek/Logitech with Spad.Next as the driver with the default-simconnect Profile by cOnnor.
There were no issues until the latest development version. The Altitude knob keeps reverting back to the value 50.000 after loading or 0 if the plane is on the ground and I pressed HOLD.

I tried to troubleshoot with multiple other profiles and found out the a320 spad next profile for fbwa20n by Pollox makes the altitude knob back to work again. The difference is he used the MSFS Lock Var:3 instead of the SimConnect Lock Var for the altitude command.

Expected behaviour

As I move the MP knob clockwise on alt mode it should increase the altitude on the autopilot panel accordingly vice versa with counterclockwise

Steps to reproduce

1. After Loading, The altitude autopilot is set on 50.000 at spawn.
2. Any changes I did with the knob keeps resetting the value back to 50.000 after a couple of turns
3. The Value of the altitude wont increase after 50.000 but does decrease a couple of hundred feets before going back to 50.000
4. On the Ground, when the HOLD is activated the display turns to 0 and everytime I tried to increase it, it goes back to 0 again after a couple hundred feet.
5. The value both on screen and on MP screen are exactly the same, they follow each other when they go back to 50.000
6. This does not happen with other function such as IAS/HDG/CRS/VS only with ALT mode in the MP Switch.
7. Did the trouble shoot mentioned above by switching the altitude commands on the default-simconnect profile in Spad.Next and kept everything else the same, and altitude is back to work again.

Additional information

Uploading IMG_3471.mov…

Your Discord

SuperAmadeus#9013

[Timberolic]

Have never seen this issue and I use the panels myself. You definitely have an incompatible profile for the panels.

[rasyidkrm]

Have never seen this issue and I use the panels myself. You definitely have an incompatible profile for the panels.

Owh nice may i have the profile you use for the 747 salty?

[Capitool]

Same problem here .. stuck altitud on 50000 and botton like lnav and hgd select doesn't work anymore .. I had change so many profile on spad.next , am glad am not the only one