Skip to content

Latest commit

 

History

History
397 lines (277 loc) · 18 KB

developer.md

File metadata and controls

397 lines (277 loc) · 18 KB
Raw

Developer guide

This guide will step you through configuring your SilverStripe project to function as a SAML 2.0 Service Provider (SP). It will also show you a typical way to synchronise user details and group memberships from LDAP, using the LDAP module.

As a SilverStripe developer after reading this guide, you should be able to correctly configure your site to integrate with the Identity Provider (IdP). You will also be able to authorise users based on their AD group memberships, and synchronise their personal details.

We assume ADFS 2.0 or greater is used as an IdP.

Table of contents

Install the module

First step is to add this module into your SilverStripe project. You can use Composer for this:

composer require silverstripe/saml

Commit the changes.

Make x509 certificates available

SAML uses pre-shared certificates for establishing trust between the Service Provider (SP - here, SilverStripe) and the Identity Provider (IdP - here, ADFS).

SP certificate and key

You need to make the SP x509 certificate and private key available to the SilverStripe site to be able to sign SAML requests. The certificate's "Common Name" needs to match the site endpoint that the ADFS will be using.

For testing purposes, you can generate this yourself by using the openssl command:

openssl req -x509 -nodes -newkey rsa:2048 -keyout saml.pem -out saml.crt -days 1826

Contact your system administrator if you are not sure how to install these.

IdP certificate

You also need to make the certificate for your ADFS endpoint available to the SilverStripe site. Talk with your ADFS administrator to find out how to obtain this.

Note: For Azure AD, you will first need to decide on the Entity ID (see next step) so that you can provide this to the Azure AD administrator - they can't provide you the certificates until you provide them the Entity ID and Reply URL values.

You may also be able to extract the certificate yourself from the IdP endpoint if it has already been configured: https://<idp-domain>/FederationMetadata/2007-06/FederationMetadata.xml.

YAML configuration

Now we need to make the silverstripe-saml module aware of where the certificates can be found.

Note: If you are configuring this application for integration with Azure AD, a couple of extra keys need to be set. See the 'Additional configuration for Azure AD' section below.

Add the following configuration to app/_config/saml.yml (make sure to replace paths to the certificates and keys):

---
Name: mysamlsettings
After: '#samlsettings'
---
SilverStripe\SAML\Services\SAMLConfiguration:
  strict: true
  debug: false
  SP:
    entityId: "https://<your-site-domain>"
    privateKey: "<path-to-silverstripe-private-key>.pem"
    x509cert: "<path-to-silverstripe-cert>.crt"
  IdP:
    entityId: "https://<idp-domain>/adfs/services/trust"
    x509cert: "<path-to-adfs-cert>.pem"
    singleSignOnService: "https://<idp-domain>/adfs/ls/"
  Security:
    signatureAlgorithm: "http://www.w3.org/2001/04/xmldsig-more#rsa-sha256"

If you don't use absolute paths, the certificate paths will be relative to the site web root.

All IdP and SP endpoints must use HTTPS scheme with TLS/HTTPS certificates matching the domain names used.

A note on signature algorithm config

The signature algorithm must match the setting in the ADFS relying party trust configuration. For ADFS it's possible to downgrade the default from SHA-256 to SHA-1, but this is not recommended. To do this, you can change YAML configuration:

SilverStripe\SAML\Services\SAMLConfiguration:
  Security:
    signatureAlgorithm: "http://www.w3.org/2000/09/xmldsig#rsa-sha1"

Service Provider (SP)

  • entityId: This should be the base URL with https for the SP (e.g. https://example.com)
  • privateKey: The private key used for signing SAML request
  • x509cert: The public key that the IdP is using for verifying a signed request

Identity Provider (IdP)

  • entityId: Provided by the IdP, but for ADFS it's typically https://<idp-domain>/adfs/services/trust
  • x509cert: The token-signing certificate from ADFS (base 64 encoded)
  • singleSignOnService: The endpoint on ADFS for where to send the SAML login request

Additional configuration for Azure AD

When configuring the module to support Azure AD, a couple of additional configuration values need to be set to work with Azure AD out of the box. The below configuration should be merged into the YML configuration you have added above.

SilverStripe\SAML\Services\SAMLConfiguration:
  expect_binary_nameid: false
  SP:
    nameIdFormat: 'urn:oasis:names:tc:SAML:1.1:nameid-format:unspecified'

SilverStripe\SAML\Extensions\SAMLMemberExtension:
  claims_field_mappings:
    'http://schemas.xmlsoap.org/ws/2005/05/identity/claims/name': 'Email'

GUID Transformation

If you prefer to receive the GUID in lower-case or upper-case format you can use the updateGuid() extension point on \SilverStripe\SAML\Control\SAMLController.

Establish trust

At this stage the SilverStripe site trusts the IdP, but the IdP does not have any way to establish the identity of the SilverStripe site.

The IdP should now be configured to extract the SP certificate from SilverStripe's SP endpoint. Once this is completed, bi-directional trust has been established and the authentication should be possible.

silverstripe-saml has some specific requirements on how ADFS, Azure AD and other IdPs are configured. Consult one of the following guides depending on the IdP you are integrating with.

In particular, most IdPs will require that you provide them with the entity ID and reply URLs (sometimes called the Assertion Consumer Service URL or ACS URL). These can be found by going to https:///saml/metadata once the above YML configuration is in place.

  • The Entity ID is the URL exactly as you have entered it in the YML above, which should be the URL to the root of your website (e.g. https://example.com)
  • The Reply URL is the Entity ID, with the suffix '/saml/acs' added to the end (e.g. https://example.com/saml/acs)

Configure SilverStripe Authenticators

To be able to use the SAML or the LDAP authenticator you will need to set them up in the mysite/_config/saml.yml.

You can choose which authenticators you would like to display on the login form.

Show the SAML Login button on login form

SilverStripe\Core\Injector\Injector:
  SilverStripe\Security\Security:
    properties:
      Authenticators:
        default: '%$SilverStripe\SAML\Authenticators\SAMLAuthenticator'

Note: to prevent locking yourself out if using the LDAP module as well, before you remove the "MemberAuthenticator" make sure you map at least one LDAP group to the SilverStripe Administrator Security Group. Consult CMS usage docs for how to do it.

Automatically require SAML login for every request

You can require that all users are logged in via SAML before any request to any page by enabling the SAMLMiddleware class. This will force a redirect if the user is not logged in, and the URL does not match a defined set of exclusions. The default list of exclusions includes all /Security URLs, so you should not use this middleware on its own to prevent users from using the normal login form. You should ensure that the default authenticator is the SAMLAuthenticator like so:

SilverStripe\Core\Injector\Injector:
  SilverStripe\Security\Security:
    properties:
      authenticators:
        default: '%$SilverStripe\SAML\Authenticators\SAMLAuthenticator'

You can enable the middleware like so:

SilverStripe\Core\Injector\Injector:
  SilverStripe\Control\Director:
    properties:
      Middlewares:
        SAMLMiddleware: '%$SilverStripe\SAML\Middleware\SAMLMiddleware'
SilverStripe\SAML\Middleware\SAMLMiddleware:
  enabled: true

You can add any number of URLs that should not require automatic login via the excluded_urls config param using regex. By default, this includes any URL under /Security and /saml. These defaults should not be changed, but you can add additional exclusions:

SilverStripe\SAML\Middleware\SAMLMiddleware:
  excluded_urls:
    - '/^MyUnauthenticatedController/i'
    - '/^signup/'

Note: These are evaluated on every request, so keep your exclusion list as small as possible.

Test the connection

At this stage you should be able to authenticate. If you cannot, you should double check the claims rules and hashing algorithm used by ADFS. Consult ADFS administrator guide to assist the ADFS administrator.

You can also review the troubleshooting guide if you are experiencing problems.

Configure LDAP synchronisation

Prerequisite: install the silverstripe-ldap module.

These are the reasons for configuring LDAP synchronisation:

  • It allows you to authorise users based on their AD groups. silverstripe-ldap is able to automatically maintain Group memberships for its managed users based on the AD "memberOf" attribute.
  • You can pull in additional personal details about your users that may not be available from the IdP directly - either because of claim rules, or inherent limitations such as binary data transfers.
  • The data is only synchronised upon modification, so it helps to keep SAML payloads small.

Connect with LDAP

Example configuration for mysite/_config/ldap.yml:

SilverStripe\LDAP\Model\LDAPGateway:
  options:
    'host': 'ad.mydomain.local'
    'username': 'myusername'
    'password': 'mypassword'
    'accountDomainName': 'mydomain.local'
    'baseDn': 'DC=mydomain,DC=local'
    'networkTimeout': 10
    'useSsl': 'TRUE'

More information on LDAP

For more information on configuring LDAP, see the LDAP module documentation.

Debugging

There are certain parts of his module that have debugging messages logged. You can configure logging to receive these via email, for example. For more information on this topic see Logging and Error Handling in the developer documentation.

SAML debugging

To enable some very light weight debugging from the 3rd party library set the debug to true

SilverStripe\SAML\Services\SAMLConfiguration:
  debug: true

In general it can be tricky to debug what is failing during the setup phase. The SAML protocol error message as quite hard to decipher.

In most cases it's configuration issues that can debugged by using the ADFS Event log, see the Diagnostics in ADFS 2.0 for more information.

Also ensure that all protocols are matching. SAML is very sensitive to differences in http and https in URIs.

Advanced SAML configuration

Allow insecure linking-by-email

Normally the SAML module looks for a Member record based only on the GUID returned by the IdP. However, this can break in some situations, particularly when you are retrofitting single-sign-on into an existing system that already has member records in the database. A common use-case is that the website is setup, with centralised SSO being added later. At that point, you already have members that are setup with standard email/password logins, and those email addresses are the same as the user's primary email in the IdP. When the SAML module searches for a user when they login via SSO for the first time, it won't find them based on GUID, and will throw an error because it will attempt to create a new member with the same email as an existing user.

For this reason, the allow_insecure_email_linking YML config variable exists. During the transition period, you can enable this option so that if the lookup-by-GUID fails to find a valid member, the module will then attempt to lookup via the provided email address before falling back to creating a new member record.

Note: This is not recommended in production. If this setting is enabled, then we fall back to relying on the non-unique email address to log in to an existing member's account. For example, consider the situation where John Smith previously had an email/password login to your website. They leave the company, and a new John Smith (unrelated to the website) inherits the email address when they join the company. If this option is enabled and the new John Smith attempts to login, despite them not being allowed access, we will set the user up and link them to the old accounts (and whatever permissions the old user had).

We strongly recommend that you perform a full review of all users and permission levels for all members in the CMS before you enable this setting to ensure you will only create accounts for people that currently exist at the IdP.

You can enable this setting with the following YML config:

---
Name: mysamlsettings
After: '#samlsettings'
---
SilverStripe\SAML\Services\SAMLConfiguration:
  allow_insecure_email_linking: true

Note: You will also need to specify a SAMLMemberExtension.claims_field_mappings claim map that sets a value for 'Email', so that the IdP provides a value to include in the email field, for example:

SilverStripe\SAML\Extensions\SAMLMemberExtension:
  claims_field_mappings:
    - 'http://schemas.xmlsoap.org/ws/2005/05/identity/claims/emailaddress': 'Email'

Adjust the requested AuthN contexts

By default, this module requests the following contexts (aka. 'ways users can login'):

  • urn:federation:authentication:windows (aka automatic Windows authentication)
  • urn:oasis:names:tc:SAML:2.0:ac:classes:Password (aka username and password, known as 'forms' authentication on the ADFS end)
  • urn:oasis:names:tc:SAML:2.0:ac:classes:X509 (aka X.509 certificate)

For more details on what options are possible for Microsoft ADFS, check out MSDN.

If you want to customise the requested options, you can do this via YML. For example, the below configuration ensures that only windows authentication is considered valid:

---
Name: samlconfig
After:
  - "#samlsettings"
---
SilverStripe\SAML\Services\SAMLConfiguration:
  authn_contexts:
    - 'urn:federation:authentication:windows'

You can also set disable_authn_contexts: true which will disable the sending of AuthN contexts at all, allowing the remote IdP to make its best decision over what to use. This will also not require an exact match (and is therefore not recommended).

Create your own SAML configuration for completely custom settings

It is possible to customize all the settings provided by the 3rd party SAML code.

This can be done by registering your own SilverStripe\SAML\Services\SAMLConfiguration object via mysite/_config/saml.yml:

Example:

---
Name: samlconfig
After:
  - "#samlsettings"
---
SilverStripe\Core\Injector\Injector:
  SAMLConfService: YourVendor\YourModule\MySAMLConfiguration

and then in your namespaced MySAMLConfiguration.php:

<?php

namespace YourVendor\YourModule;

class MySAMLConfiguration
{
    public function asArray()
    {
        return [
            // add settings here;
        ];
    }
}

See the advanced_settings/_example.php for the advanced settings.

Additional GET Query Params for SAML

example:

SilverStripe\SAML\Services\SAMLConfiguration:
  additional_get_query_params:
    someGetQueryParameter: 'value'
    AnotherParameter: 'differentValue'

this configuration allows you to add two GET query parameters to endpoint request URL: https://your-idp.com/singleSignOnService/saml2?someGetQueryParameter=value&AnotherParameter=differentValue&SAMLRequest=XYZ....

Resources