JC3248W535.h

#pragma once

// Display
#include <Arduino_GFX_Library.h>
#define GFX_BL 1
Arduino_DataBus *bus = new Arduino_ESP32QSPI(
    45 /* cs */, 47 /* sck */, 21 /* d0 */, 48 /* d1 */, 40 /* d2 */, 39 /* d3 */);
// #define CANVAS_R1
#ifdef CANVAS_R1
Arduino_AXS15231B *g = new Arduino_AXS15231B(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */, false /* IPS */, 320 /* width */, 480 /* height */);
#define CANVAS
Arduino_Canvas *gfx = new Arduino_Canvas(320 /* width */, 480 /* height */, g, 0 /* output_x */, 0 /* output_y */, 1 /* rotation */);
#else
Arduino_AXS15231B *gfx = new Arduino_AXS15231B(bus, GFX_NOT_DEFINED /* RST */, 0 /* rotation */, false /* IPS */, 320 /* width */, 480 /* height */);
#endif
#define GFX_SPEED 40000000UL

// Button
// #define BTN_A_PIN 0
// #define BTN_B_PIN 21

// I2C
#define I2C_SDA 8
#define I2C_SCL 4
#define I2C_FREQ 400000UL

// Touchscreen
#define TOUCH_MODULES_GT911
#define TOUCH_MODULE_ADDR GT911_SLAVE_ADDRESS1
#define TOUCH_SCL I2C_SCL
#define TOUCH_SDA I2C_SDA
#define TOUCH_RES 38
#define TOUCH_INT 3

// SD card
#define SD_SCK 12
#define SD_MOSI 11 // CMD
#define SD_MISO 13 // D0
// #define SD_D1 1
// #define SD_D2 6
#define SD_CS 10 // D3

// I2S
#define I2S_DEFAULT_GAIN_LEVEL 0.1
#define I2S_OUTPUT_NUM I2S_NUM_0
#define I2S_MCLK -1
#define I2S_BCLK 42
#define I2S_LRCK 2
#define I2S_DOUT 41
#define I2S_DIN -1

// #define AUDIO_MUTE_PIN 48   // LOW for mute