Skip to content

Latest commit

 

History

History
247 lines (170 loc) · 8.27 KB

README.md

File metadata and controls

247 lines (170 loc) · 8.27 KB

!NADA

!Not ADAptive Thresholds

Version: 0.09

WARNING!

THIS PROJECT IS COMPLETELY EXPERIMENTAL!

Feedback is welcome


What is !NADA?

!NADA is a brand new project which intents to insert baseline adaptive thresholds to Nagios(R) or Icinga monitoring frameworks. By "adaptive" I mean a threshold which may change through time, accordingly to a given resource behaviour.

This project is intended those ones, who have already did a question like: "How can I avoid false positives when monitoring a given server that every Monday has a higher load average than during the other days?"

How does it work?

!NADA requires a MySQL database running or an SQLite installation together with Nagios(R)/Icinga. It encapsulates your check plugin, parses and stores performance data into DB, calculates the standard deviation and creates two new metrics, pointing to the top and bottom of your baseline. If collected value overflow (up or down) the baseline, !NADA change the plugin return code to CRITICAL thus causing Nagios(R)/Icinga to alert.

!NADA' standard behaviour assumes that you are using a week sazonality, if it's not appropriate, please may the source be with you.

Let's explain how it works by a simple example:

If a given check occurs just now (let's say: Monday at 11:07 PM), !NADA will retrieve the last one hundred Monday =~ 11:07 PM check results from DB. It will then calculate the stardard deviation using these one hundred check results and make a good baseline to current check.

OK, how can I configure this thing?

Let's suppose you have a Nagios(R)/Icinga command configuration like this:

define command{
    command_name    check_disk
    command_line    $USER1$/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$
}

You just need to change command to the following and you are ready:

define command{
    command_name    check_disk_baseline
    command_line    /path/to/nada $USER1$/check_disk -w $ARG1$ -c $ARG2$ -p $ARG3$
}

Configure is easy, how about compile?

At these early stages I have not prepared any how-to on compilation, however it's pretty direct and simple.

You'll need just a C compiler (of course) and mysql-devel package installed into your system (if you're gonna use MySQL, otherwise you need sqlite-devel). I left a simple Makefile together with the project, so if you want to adapt it to your system, feel free to do it, but don't forget to send me a diff. ;)

MySQL compilation (as root)

make mysql
make install

SQLite compilation (as root)

make sqlite
make install

I have sucessfully built it with:

  • gcc version 4.6.3 20120306 (Red Hat 4.6.3-2) (GCC)
  • Linux 3.4.2-1.fc16.x86_64
  • mysql-devel-5.5.24-1.fc16.x86_64
  • sqlite-devel-3.7.7.1-1.fc16.x86_64

and also

  • gcc version 4.1.2 20080704 (Red Hat 4.1.2-52)
  • Linux 2.6.18-308.1.1.el5PAE
  • mysql-devel-5.0.95-1.el5_7.1
  • sqlite-devel-3.3.6-6

Un-installation (as root)

make uninstall

How about configuring MySQL?

You will find a .sql file together with the package. You basically need to run:

mysql -u root -p -A < database-creation.sql 

How can I configure MySQL database user/password?

You can change the user, password and host to your MySQL server by editing baseline.ini at root source directory before installing or, after running "make install", edit it under /opt/nada/.

Important - baseline.ini explained

  • minentries=X

    If !NADA couldn't find at least X entries on its database, it will not apply baseline calculation to determine check state. In this specific case, !NADA will return the same code returned to it by plugin execution. As we need a reasonable amount of historic data to be able to calculate the standard deviation, I chose to let it at user choise what's the minimun number of entries before start to actually change plugin's output. X must be an integer.

    Example: If you set this value to 10, using !NADA in a service which checks at every 5 minutes, it will take =~ 10 weeks(considering a sazonality value of 7 - see bellow) to actually start applying baseline calculation.

    Otherwise if you have a service wich checks at every minute, !NADA probably will start to calculate the baseline within =~ 2 weeks(again considering a sazonality value equal to 7). This is an algorithm side effect: internally, on query execution, it applies by default a tolerance of 5 minutes when retrieveng data of last weeks, so, for example, a execution today Fri 14:30:00 will fetch data from all last Fridays between 14:28:30 and 14:32:30.

  • maxentries=X

    The opposite of the option above. This determines the maximum number of historic data retrieved to calculate baseline. Pay attention to the performance issues implied with this specific option. X must be an integer.

  • sazonality=X

    With this option, you specify in days how long your service sazonality is. So, for example, if your monitored service has a behaviour which repeats itself every day(a server which load has a considerable increase every midday) you may define X to 1. In the other hand, if your service has an increase, let's say, every monday, you may define sazonality to 7(in other words, one week). X must be an integer.

  • tolerance=X

    After standard deviation calc, a tolerance index is applied before define resource's top and bottom limits. X must be an integer, and it should represent an acceptable percentage tolerance on monitored resource usage.

  • allownegatives=[yes|no]

    This options defines if after the calc for deviation has been made, the value for bottom boundary will be able to remain below 0(zero). If this option is defined to 'no', and the bottom boundary reamains below zero, bottom line will become 0.

  • baselinealgorithm=[exponential_smoothing|standard_deviation]

    Define algorithm to baseline calculation. Avaible algorithms by now are "Standard Deviation" or "Simple Exponential Smoothing", try both to see which fits better to your monitored resource.

[DATABASE]

  • host=localhost MySQL server's IP address. This parameter is ignored in case of SQLite.

  • user=root MySQL user with write/read permissions to nada database. This parameter is ignored in case of SQLite.

  • password=mypass MySQL users's password. This parameter is ignored in case of SQLite.

  • dbname=nada For MySQL, specify database name(default nada). For SQLite, it points to valid path where SQLite gonna be created(i.e. dbname=/tmp/nada)

Database Management

Included with this package there's an executable that should be scheduled to run once a day in your crontab. This executable clean all data that NADA doesn't need anymore, avoiding dabase uncontrolled grow.

To correctly schedule database clean up process, just use line below on your crontab configuration:

5 0 * * * root /opt/nada/purge-db-data >/dev/null 2>/dev/null

Why in the hell C?

The right answer is: because I like it. You may find a lot of resources pointing that is far better than C, but really, really, common! I was just trying to experiment my C in the real world and try to help community :-D

If you want to implement a brand new shining !NADA version on a 'hype' language, please remember to advise me, so I can point a link here to your project.

How to help?

To see what's going on with this small project, please look at the CHANGES and TODO files, and if you're willing to help in any way, please contact-me and I'll certainly have something for you to do.

If you help out, you'll end up on the THANKS page!

Caveats

Some well known issues.

  • Expression tree is too large (maximum depth 1000)

    NADA uses extensively database and, in case of SQLite, there's a limitation on query depth. Try to decrease baseline.ini's `maxentries' parameter to a value below 500 and see if the problem persists.

    For further details on this issue: http://www.sqlite.org/limits.html