Testing with ais-simulation

[rgleason]

See this:
marcobergman/ais_simulation#10 (comment)

Seeing your examples, where the boat just follows the active route without user intervention using your ais-simulation tool, convinces me that I have not set up the testing environment properly. Procedure:

1. Set Options > Connections
2. Network Directon: Input Protocol: UDP Address: 0.0.0.0 Port: 10110
3. Network Directon: Output Protocol: TCP Address: (your computer's IP address) 192.168.1.120 Port: 20220
4. Check "Output on this port (as autopilot or nmea repeater) Talker ID "EC" APB bearing precision x.xxxx Input precision: Accept only sentences. Output precison: Output only sentences.
5. Open the Options > Connections Nmea0183 Debug window.
6. Route import Gpx "test-route.gpx" and set it as an active route?
7. Start ais-simulation.exe or execute python ais_simulation.py which uses/runs ais_simulation.gpx
8. https://github.com/marcobergman/ais_simulation
9. Then how do I get the boat to follow the route? Something appears to be missing still.

NOTE: It is a Speedup factor, not knots. By default .gpx config, at factor=1, the simulated boat would go 6.0 knots.