Bit-Perfect / No volume is ON but am able to change volume! Not Working? #442
-
@rern I am using 64-Bit version (not tested this issue on other versions yet) and have bit perfect on with no rotary volume control showing but discovered with an accidental click below the cover that I was able to change volume. Surely this shouldn't be able to be done if the mixer is off and is "Bit-Perfect"? rAudio 1 • 20210716 |
Beta Was this translation helpful? Give feedback.
Replies: 3 comments 6 replies
-
I am using the same OS version with the same settings, but with a different (XMOS) USB interface, and I can't reproduce this problem. |
Beta Was this translation helpful? Give feedback.
-
Looks to be fixed with todays update (20210704), although did require me to change audio to on-board headphones and then back to "E30" DAC for the change to take place. Thanks @rern for remediating the bug and @R101-Github for helping confirm the issue. I will wait for confirmation from R101-Github before closing. Roland B |
Beta Was this translation helpful? Give feedback.
-
@Roland-B @rern |
Beta Was this translation helpful? Give feedback.
Looks to be fixed with todays update (20210704), although did require me to change audio to on-board headphones and then back to "E30" DAC for the change to take place. Thanks @rern for remediating the bug and @R101-Github for helping confirm the issue. I will wait for confirmation from R101-Github before closing.
Roland B