Updating the repository

This document is intended for contributors who wishes to update or modify this repository.

Setup

Before we get started, let's make sure we're on the same page.

• You are running a 64-bit version of Windows 7 or above
• You have downloaded and installed Visual Studio 2013
• You have downloaded and installed the MSVC 2013 version of Qt
• You have downloaded and installed Python 2.7.9 x86-64
• You have downloaded and extracted sip and PyQt5
• You can run Python by typing python from your command prompt
• You are in the parent directory of the extracted sip and PyQt5 distributions.

$ cd %HOMEPATH%\Downloads\

Compilation

Head on over to your terminal and let's get compiling.

Please note that the compilation can take over an hour to finish.

Compiling Sip

# Setup Visual C++ x64
$ "c:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\bin\amd64\vcvars64.bat"
$ cd sip-4.16.5
$ python configure.py
$ nmake
$ nmake install

Compiling PyQt5

$ cd ..\PyQt-gpl-5.4
# This part requires that the Qt binaries are on your PATH
$ set PATH=%PATH%;C:\Qt\5.4\msvc2013_64\bin
$ python configure.py
$ nmake
$ nmake install

Several minutes later, you should have a working copy of PyQt5 and sip in your Python's site-packages directory.

c:\Python27\Lib\site-packages\PyQt5

Testing to be sure

1. Download test.py from the helper gist.
2. Run test.py

You should be seeing a window with a single clickable button in it.

Bundling

Now for the tricky part.

Qt, and therefore PyQt, have a number of requirements on the environment in which it is to be run. Right off the bat, you'll notice that if you run run the same test from above in a new terminal, it will fail.

$ python test.py
ImportError: DLL load failed: The specified module could not be found.

The reason it worked before was because of the PATH environment variable we set up for compilation, remember? The one pointing to the Qt \bin directory? But we can't ask users to first install PyQt5, and then install Qt. We'd like them to install just PyQt5 and be done with it.

And that's exactly what we'll be doing in this part.

Table of contents

1. Bundling binaries
2. Bundling plugins
3. Bundling QML libraries
4. Bundling sip
5. Bundling Extras
6. Bundling Visual C++ redistributable

1/6 - Bundling binaries

The first and most obvious fact is that we need to include the Qt binaries into the distribution. PyQt is merely a C-to-Python translator for these binaries and without them it won't do much.

We can prove this by including the binaries to the PATH and running the test again.

$ set PATH=%PATH%;C:\Qt\5.4\msvc2013_64\bin
$ python test.py

The \bin directory is however very large, how do we know which ones to include? I'm glad you asked. In a nutshell, without rigorious testing and assumption making, the safest thing we can do is to include all of them, except for..

• Files ending with "d.dll"
• Files ending with ".pdb"
• exclusion_list.yaml

Which is only used for development.

Copy binaries

1. Copy everything under C:\Qt\5.4\msvc2013_64\bin
2. To C:\Python27\Lib\site-packages\PyQt5
3. Download clean_binaries.py from the helper gist
4. Run clean_bin.py within the PyQt5 directory

$ cd c:\Python27\Lib\site-packages\PyQt5
$ python clean_binaries.py
...
Removing .\Qt5Widgetsd.dll
Removing .\Qt5Widgetsd.pdb
Removing .\Qt5WinExtrasd.dll
Removing .\Qt5WinExtrasd.pdb
Removing .\Qt5Xmld.dll
Removing .\Qt5Xmld.pdb
Removing .\Qt5XmlPatternsd.dll
Removing .\Qt5XmlPatternsd.pdb
Finished

Testing

With that out of the way, let's test it.

$ python test.py

Excellent. What's next?

2/6 - Bundling Plugins

Qt ships with a number of plug-ins; one of these plug-ins is the QPA, for Qt Platform Abstraction. Without this, we will not be able to make much use of PyQt5.

We can prove this by temporarily renaming the plugins directory of the original Qt distribution.

Proving the dependency of plugins

1. Rename plugins in C:\Qt\5.4\msvc2013_64
2. To _plugins
3. Run test.py

$ python test.py
This application failed to start because it could not find or load the Qt platform plugin "windows".

To bundle the plugins

1. Copy plugins from c:\Qt\5.4\msvc2013_64
2. To C:\Python27\Lib\site-packages\PyQt5
3. Run clean_binaries.py to clean up unwanted files.
4. You should now have a directory C:\Python27\Lib\site-packages\PyQt5\plugins
5. Run test.py

$ python test.py

It's still not working? That's because although we have copied the plugins, Qt doesn't know where to look for them. We can tell it by including a special file called qt.conf, which looks like this.

qt.conf

[Paths]
Prefix = .

This tells Qt to prefix all of it's default search paths with the parent directory of qt.conf. This includes paths to plugins, but also QML libraries.

1. Save qt.conf in your C:\Python27\Lib\site-packages\PyQt5 directory.
2. Run the test again to confirm.

Read more about QPA and Qt.conf here

• http://doc.qt.io/qt-5/qt-conf.html
• http://doc.qt.io/qt-5/qpa.html

3/6 - Bundling QML Libraries

As mentioned above, if we want to be able to use QML, we must include it's libraries. Let's start by confirming that running a QML application currently does not work.

1. Download test.qml
2. Run test.qml

$ C:\Python27\Lib\site-packages\PyQt5\qmlscene.exe test.qml
module "QtQuick" is not installed

**Bundle the QML libraries.

1. Copy qml from C:\Qt\5.4\msvc2013_64
2. To C:\Python27\Lib\site-packages\PyQt5
3. You should now have a directory called C:\Python27\Lib\site-packages\PyQt5\qml
4. Run test.qml

$ C:\Python27\Lib\site-packages\PyQt5\qmlscene.exe test.qml

Due to qt.conf, Qt will know to look for this exact directory in the parent directory of qt.conf.

4/6 - Bundling sip

Sip is a dependency of PyQt5, we can prove this by temporarily renaming it from the Python site-packages directory.

Prove that sip is a dependency

1. Rename sip.pyd in C:\Python27\Lib\site-packages
2. To _sip.pyd
3. Run test

$ python test.py
ImportError: No module named sip

Bundling sip

1. Copy sip.pyd from C:\Python27\Lib\site-packages
2. To C:\Python27\Lib\site-packages\PyQt5
3. Run test

$ python test.py

5/6 - Bundling Extras

Apart from including everything Qt, we are also going to want to include the work done by Riverbank Software.

To bundle all extras

1. Download and install the [PyQt5 for Python 3][py3qt5] distribution (you won't need Python 3 installed).
2. Copy the following directories from C:\Python34\Lib\site-packages\PyQt5

doc
examples
include
mkspecs
qsci
sip
translations
uic

3. Into C:\Python27\Lib\site-packages\PyQt5
4. Remove C:\Python27\Lib\site-packages\PyQt5\uic\port_v3 (as it only applies to Python 3)

6/6 - Bundling the Visual C++ Redistributable

The next and final step is coming to us from Visual Studio-land. And that is the Visual C++ re-distributable.

msvcr120.dll
msvcp120.dll

# Located in
C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\redist\x64\Microsoft.VC120.CRT

To prove this, let us temporarily rename this file and run our test.

To prove the dependency on Visual C++ redistributable

1. Rename either msvcr120.dll or msvcp120.dll in C:\Windows\System32
2. To _msvcr120.dll or _msvcp120.dll
3. Run the test.

$ python test.py
ImportError: DLL load failed: The specified module could not be found.

4. Restore the names.

To bundle the Visual C++ redistributable

1. Copy msvcr120.dll and msvcp120.dll from C:\Program Files (x86)\Microsoft Visual Studio 12.0\VC\redist\x64\Microsoft.VC120.CRT
2. To C:\Python27\Lib\site-packages\PyQt5
3. Run the test

$ python test.py

You should now be able to run the test successfully regardless of the files in your System32 directory.

Versioning

In addition to bundling, we'll need to append versioning information to the package so as to keep track of which python-qt5 release is the latest one.

1. Start by copying [the original __init__.py][init]
2. To C:\Python27\Lib\site-packages\PyQt5
3. Overwrite existing

Next we'll increment the version number according to our toolchain.

To append version numbers

1. Open C:\Python27\Lib\site-packages\PyQt5\__init__.py in your favorite text editor.
2. Increment the following.

version_info = (0, 2, 0)

The scheme is:

• (0, 2, 0) means fixes
• (0, 2, 0) means updates to the Qt library (such as this).
• (0, 2, 0) means backwards-incompatible changes.

Versioning Extras

In addition, we'll also increment the PyQt and Qt versions that were used in the making of this distribution.

pyqt_version_info = (5, 4, 0)
qt_version_info = (5, 4, 0)

The reason we need both is because it's possible that these two differ.

Pushing

Now that we've got a working copy of PyQt5, it's time to update the repository. The first thing we'll need to do is clone the exiting state of the repository.

$ cd c:\
$ mkdir github
$ cd github
$ git clone https://github.com/pyqt/python-qt5.git
$ cd python-qt5

Get rid of the old**

Now we will rip it apart, leaving only the what is needed for GitHub and Travis to function.

1. Remove the c:\github\python-qt5\PyQt5 directory.
2. Remove everything in c:\github\python-qt5\src

In with the new

Now we fill it back up with our newly compiled distribution.

1. Copy PyQt5 from C:\Python27\Lib\site-packages
2. To c:\github\python-qt5
3. Copy the source distributions PyQt-gpl-5.4 and sip-4.16.5
4. Into c:\github\python-qt5\src
5. The GPL requires that we include these.

Test

Before we push it out into the wild, let's make sure it works.

To make sure it works

1. On another machine/environment
2. Install with pip.

$ pip install virtualenv
$ virtualenv test-qt5 --no-site-packages
$ test-qt5\Scripts\activate
(test-qt5) $ pip install c:\github\python-qt5
(test-qt5) $ python c:\github\test.py

Give it a big push

Assuming everything worked out, we can now push.

$ git add .
$ git commit -m "Updating Qt to 5.4"
$ git push

Upload to PyPI

This potion requires that you have write access to the repository. If you don't, please feel free to push to your own fork and submit a pull-request and I'll ensure it gets uploaded to PyPI as soon as possible!

1. Go to the Releases page on GitHub.
2. Tag the release with it's version name; e.g. 0.2.0
3. From here, Travis will compile and upload the release to PyPI.

See Releases for examples of previous releases.

And you're done. Thanks for taking the time to update the PyQt5 distribution and happy programming!

Todo

• Script this guide
• More testing
  • Number of files installed via pip vs. number of original files (they should match)
• Simplify setup.py:get_package_data()
• Update exclusion_list.yaml

Help wanted.