This repository contains the ongoing progress on the firmware for the FLipMouse version3. It will be API compatible with version 2, but with major improvements on speed (instead of one CortexM0 we will have a dual-core Tensilica and an additional CortexM0 for USB).
If you want to have a look at the FLipMouse, follow this link to the main repository.
The BLE-HID stuff is based on the other repository, where we use the ESP32 as BLE module replacement (EZKey modules are really buggy and expensive).
Following 3 steps are necessary to completely update/flash the firmware and the necessary support files/devices:
Please follow the step-by-step instructions of Espressif's ESP-IDF manual to setup the build infrastructure: Setup Toolchain
After a successful setup, you should be able to build the FLipMouse/FABI firmware by executing 'make flash monitor'.
The dedicated USB chip firmware is located in this repository: usb_bridge. Please clone this repository, and import it into the MCUXpresso IDE.
You can download the IDE here: MCUXpresso IDE
After a successful build, you need to flash the firmware to the LPC11U14 chip. We recommend using a development board by Embedded Artists, because it is very useful for initial testing & debugging. It is possible to split this board into two pieces, one LPC11U14 target and a JTAG programmer, which we use on a fully assembled FLipMouse. Please refer to the corresponding documents of this board how to connect the JTAG header to our FLipMouse (will be announced as soon as the PCB is final).
LPCXpresso development board:
The FLipMouse with ESP32 contains a web interface for customizing the parameters. The web page itself is located in the FAT partition as the config data.
TBA: I think it is very easy to use mkfats by copying the component into ESP-IDF and simply call make mkfatfs to build the tool and make flashfatfs to upload the image.
BUT we have a 8.3 naming convention here...
Currently proposed workflow:
Please clone/download the mkfats tool, and copy the folder ESP32_mkfatfs/components/mkfatfs into your
ESP-IDF's components path.
Execute make mkfatfs in this repository to build the mkfatfs tool.
If you want to update the webpage on the FLipMouse/FABI device, execute:
make makefatfs flashfatfs
WARNING:** All your slot configuration and IR commands will be deleted by this operation.
Supporters, MA23, people using this device and many more for input.
ESP-IDF developers for HOG testcode
mkfatfs project
thanks to Luca Dentella for the esp32lights demo, see http://www.lucadentella.it/en/2018/01/08/esp32lights/
thanks to Jeroen Domburg and Cornelis for the captive portal DNS code, see: https://github.com/cornelis-61/esp32_Captdns
thanks to Thomas Barth for esp32 Websocket demo code, see https://github.com/ThomasBarth/WebSockets-on-the-ESP32/
thanks to Lucas Bruder for the Neopixel library for ESP32, see https://github.com/Lucas-Bruder/ESP32_LED_STRIP/