Home

#Welcome to the iohyve wiki!

We'll put some general how to articles, updating procedures, and other news here.

Check the pages in the side bar for specific pages.

#####Below you can also find a mirror of the current README file

Pre-Flight Checklist

As of v0.7 iohyve takes care of setting up your machine if you let it. Once you have created your ZFS pool named 'tank' you can run:

iohyve setup pool=tank

If you want iohyve to take care of networking, so you don't have to set up rc.conf you can do the following:

iohyve setup net=em0		# 'em0' is the interface I want bridge0 attached to.

You can even have iohyve load the required kernel modules:

iohyve setup kmod=1

You can also do all of the above at once:

iohyve setup pool=tank kmod=1 net=em0

If you want iohyve to set up the kernel modules and bridge0 every time you boot, add these lines to /etc/rc.conf:

iohyve_enable="YES"
iohyve_flags="kmod=1 net=em0"

If you want more control over your setup, feel free to read the handbook.

Usage

iohyve  

version
setup pool=[poolname] kmod=[0/1] net=[interface]
list
info [-d]
isolist
fwlist
fetch [URL]
cpiso [path]
renameiso [ISO] [newname]
rmiso [ISO]
fetchfw [URL]
cpfw [path]
renamefw [firmware] [newname]
rmfw [firmware]
create [name] [size]
install [name] [ISO]
load [name] [path/to/bootdisk]
boot [name] [runmode] [pcidevices]
start [name] [-s | -a]
stop [name]
forcekill [name]
scram
destroy [name]
rename [name] [newname]
delete [name]
set [name] [prop1=value] [prop2=value]...
get [name] [prop]
getall [name]
add [name] [size]
remove [name] [diskN]
resize [name] [diskN] [size]
disks [name]
snap [name]@[snapshotname]
roll [name]@[snapshotname]
clone [name] [clonename]
snaplist
taplist
activetaps
conlist
console [name]
conreset
help

General Usage

List all guests created with:

iohyve list

You can change guest properties by using set:

iohyve set bsdguest ram=512M                 #set ram to 512 Megabytes
iohyve set bsdguest cpu=1                    #set cpus to 1 core
iohyve set bsdguest pcidev:1=passthru,2/0/0  #pass through a pci device

You can also set more than one property at once:

iohyve set bsdguest tap=tap0 con=nmdm0		#set tap0 and nmdm0

You can also set a description that can be a double quoted (") string with no equals sign (=). All spaces are turned into underscores (_). At guest creation, the description is the output of date

iohyve set bsdguest description="This is my string"

It's always prudent to destroy a guest before changing settings that may affect a running guest. It's also a good idea to destroy a guest after your installation phase has completed. Destroying a guest does not delete a guest from the host, it destroys the guest in VMM.

iohyve destroy bsdguest

Get a specific guest property:

iohyve get bsdguest ram

Get all guest properties:

iohyve getall bsdguest

Do cool ZFS stuff to a guest:

#Take a snapshot of a guest.
iohyve snap bsdguest@beforeupdate  #take snapshot
iohyve snaplist                    #list snapshots
iohyve roll bsdguest@beforeupdate  #rollback to snapshot

# Make an independent clone of a guest
# This is not a zfs clone, but a true copy of a dataset
iohyve clone bsdguest dolly	   #make a clone of bsdguest to dolly

FreeBSD Guests

Fetch FreeBSD install ISO for later:

iohyve fetch ftp://ftp.freebsd.org/.../10.1/FreeBSD-10.1-RELEASE-amd64-bootonly.iso

Rename the ISO if you would like:

iohyve renameiso FreeBSD-10.1-RELEASE-amd64-bootonly.iso fbsd10.iso

Create a new FreeBSD guest named bsdguest with an 8Gigabyte virtual HDD:

iohyve create bsdguest 8G

List ISO's:

iohyve isolist

Install the FreeBSD guest bsdguest:

iohyve install bsdguest FreeBSD-10.1-RELEASE-amd64-bootonly.iso

Console into the installation:

iohyve console bsdguest

Once installation is done, exit console (~~.) and stop guest:

iohyve stop bsdguest

Now that the guest is installed, it can be started like usual:

iohyve start bsdguest

Some guest os's can be gracefully stopped:

iohyve stop bsdguest

If you are having problems with a guest that is unresponsive you can forcekill it as a last resort. USE THIS WITH CAUTION, IT WILL KILL ALL PROCESSES THAT MATCH THE NAME OF THE GUEST.

iohyve forcekill grubguest

Other BSDs:

Try out OpenBSD:

iohyve set obsdguest loader=grub-bhyve os=openbsd58
iohyve install obsdguest install58.iso
iohyve console obsdguest

Try out NetBSD:

iohyve set nbsdguest loader=grub-bhyve
iohyve set nbsdguest os=netbsd
iohyve install nbsdguest NetBSD-6.1.5-amd64.iso
iohyve console nbsdguest

Linux flavors:

Try out Debian or Ubuntu (note LVM installs should work with os=d8lvm):

iohyve set debguest loader=grub-bhyve
iohyve set debguest os=debian
iohyve install debguest debian-8.2.0-amd64-i386-netinst.iso
iohyve console debguest

Try out ArchLinux:

iohyve set archguest loader=grub-bhyve
iohyve set archguest os=arch
iohyve install archguest archlinux-2015.10.01-dual.iso
iohyve console archguest