bed_sensor.yaml

---
substitutions:
  device: bed_sensor
  name: Bed Sensor
  update_interval: 10min
esphome:
  name: ${device}
  platform: ESP32
  board: esp-wrover-kit

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password
  domain: !secret lan_domain
  
  ap:
    ssid: "Bed Sensor"
    password: "J7VriMtEqIPz"

<<: !include common/api.yaml
<<: !include common/ota.yaml
<<: !include common/web_server.yaml
<<: !include common/text_sensors.yaml
<<: !include common/switch.yaml
<<: !include common/sensor.yaml
<<: !include common/logger.yaml

# Setting up the pressure mats
esp32_touch:
# Delete this after you are done with the setup process
   setup_mode: true
# All the pressure mats
# Change the pins to the pins you have used
binary_sensor:
   - !include common/binary_sensor/status.yaml
   - platform: esp32_touch
     name: "Top Right"
     pin: GPIO14
# See step 11
     threshold: 5
     id: top_right
   - platform: esp32_touch
     name: "Bottom Left"
     pin: GPIO33
# See step 11
     threshold: 4
     id: bottom_left
   - platform: esp32_touch
     name: "Top Left"
     pin: GPIO15
# See step 11
     threshold: 4
     id: top_left
   - platform: esp32_touch
     name: "Bottom Right"
     pin: GPIO27
# See step 11
     threshold: 4
     id: bottom_right
# The main sensor that is created using the all the zones    
   - platform: template
     name: "Bed Sensor"
     lambda: |-
       if (id(top_right).state ||
           id(top_left).state ||
           id(bottom_right).state ||
           id(bottom_left).state) {
         return true;
       } else {
         return false;
       }
   - platform: template
     name: "Left Side Bed Sensor"
     lambda: |-
       if (id(top_left).state ||
           id(bottom_left).state) {
         return true;
       } else {
         return false;
       }
   - platform: template
     name: "Right Side Bed Sensor"
     lambda: |-
       if (id(top_right).state ||
           id(bottom_right).state) {
         return true;
       } else {
         return false;
       }