diff --git a/app/module/drivers/CMakeLists.txt b/app/module/drivers/CMakeLists.txt
index 5281c3dcb21e..a3a15c651688 100644
--- a/app/module/drivers/CMakeLists.txt
+++ b/app/module/drivers/CMakeLists.txt
@@ -5,3 +5,4 @@ add_subdirectory_ifdef(CONFIG_GPIO gpio)
 add_subdirectory_ifdef(CONFIG_KSCAN kscan)
 add_subdirectory_ifdef(CONFIG_SENSOR sensor)
 add_subdirectory_ifdef(CONFIG_DISPLAY display)
+add_subdirectory_ifdef(CONFIG_INPUT input)
diff --git a/app/module/drivers/Kconfig b/app/module/drivers/Kconfig
index c57ed3347c99..db3f49a5510f 100644
--- a/app/module/drivers/Kconfig
+++ b/app/module/drivers/Kconfig
@@ -5,3 +5,4 @@ rsource "gpio/Kconfig"
 rsource "kscan/Kconfig"
 rsource "sensor/Kconfig"
 rsource "display/Kconfig"
+rsource "input/Kconfig"
diff --git a/app/module/drivers/input/CMakeLists.txt b/app/module/drivers/input/CMakeLists.txt
new file mode 100644
index 000000000000..20cb359823f9
--- /dev/null
+++ b/app/module/drivers/input/CMakeLists.txt
@@ -0,0 +1,6 @@
+# Copyright (c) 2022 The ZMK Contributors
+# SPDX-License-Identifier: MIT
+
+zephyr_library_amend()
+
+zephyr_library_sources_ifdef(CONFIG_INPUT_PINNACLE input_pinnacle.c)
diff --git a/app/module/drivers/input/Kconfig b/app/module/drivers/input/Kconfig
new file mode 100644
index 000000000000..9035a2f6fce7
--- /dev/null
+++ b/app/module/drivers/input/Kconfig
@@ -0,0 +1,12 @@
+# Copyright (c) 2022 The ZMK Contributors
+# SPDX-License-Identifier: MIT
+
+menuconfig INPUT_PINNACLE
+    bool "Cirque Pinnacle trackpads"
+    default y
+    depends on GPIO
+    depends on SPI || I2C
+    depends on INPUT
+    depends on DT_HAS_CIRQUE_PINNACLE_ENABLED
+    help
+      Enable driver for Cirque Pinnacle trackpads
diff --git a/app/module/drivers/input/input_pinnacle.c b/app/module/drivers/input/input_pinnacle.c
new file mode 100644
index 000000000000..40040cfab2b5
--- /dev/null
+++ b/app/module/drivers/input/input_pinnacle.c
@@ -0,0 +1,386 @@
+#define DT_DRV_COMPAT cirque_pinnacle
+
+#include <zephyr/init.h>
+#include <zephyr/input/input.h>
+#include <zephyr/dt-bindings/input/input-event-codes.h>
+
+#include <zephyr/logging/log.h>
+
+#include "input_pinnacle.h"
+
+LOG_MODULE_REGISTER(pinnacle, CONFIG_INPUT_LOG_LEVEL);
+
+static int pinnacle_seq_read(const struct device *dev, const uint8_t addr, uint8_t *buf,
+                             const uint8_t len) {
+    const struct pinnacle_config *config = dev->config;
+#if DT_INST_ON_BUS(0, spi)
+    uint8_t tx_buffer[len + 3], rx_dummy[3];
+    tx_buffer[0] = PINNACLE_READ | addr;
+    memset(&tx_buffer[1], PINNACLE_AUTOINC, len + 2);
+
+    const struct spi_buf tx_buf[2] = {
+        {
+            .buf = tx_buffer,
+            .len = 3,
+        },
+        {
+            .buf = &tx_buffer[3],
+            .len = len,
+        },
+    };
+    const struct spi_buf_set tx = {
+        .buffers = tx_buf,
+        .count = 2,
+    };
+    struct spi_buf rx_buf[2] = {
+        {
+            .buf = rx_dummy,
+            .len = 3,
+        },
+        {
+            .buf = buf,
+            .len = len,
+        },
+    };
+    const struct spi_buf_set rx = {
+        .buffers = rx_buf,
+        .count = 2,
+    };
+    int ret = spi_transceive_dt(&config->bus, &tx, &rx);
+
+    return ret;
+#elif DT_INST_ON_BUS(0, i2c)
+    return i2c_burst_read_dt(&config->bus, PINNACLE_READ | addr, buf, len);
+#endif
+}
+
+static int pinnacle_write(const struct device *dev, const uint8_t addr, const uint8_t val) {
+    const struct pinnacle_config *config = dev->config;
+#if DT_INST_ON_BUS(0, spi)
+    uint8_t tx_buffer[2] = {PINNACLE_WRITE | addr, val};
+    uint8_t rx_buffer[2];
+
+    const struct spi_buf tx_buf = {
+        .buf = tx_buffer,
+        .len = 2,
+    };
+    const struct spi_buf_set tx = {
+        .buffers = &tx_buf,
+        .count = 1,
+    };
+
+    const struct spi_buf rx_buf = {
+        .buf = rx_buffer,
+        .len = 2,
+    };
+    const struct spi_buf_set rx = {
+        .buffers = &rx_buf,
+        .count = 1,
+    };
+
+    const int ret = spi_transceive_dt(&config->bus, &tx, &rx);
+
+    if (rx_buffer[1] != PINNACLE_FILLER) {
+        LOG_ERR("bad ret val %d", rx_buffer[1]);
+        return -EIO;
+    }
+
+    if (ret < 0) {
+        LOG_ERR("spi ret: %d", ret);
+    }
+    return ret;
+#elif DT_INST_ON_BUS(0, i2c)
+    return i2c_reg_write_byte_dt(&config->bus, PINNACLE_WRITE | addr, val);
+#endif
+}
+
+static void set_int(const struct device *dev, const bool en) {
+    const struct pinnacle_config *config = dev->config;
+    int ret = gpio_pin_interrupt_configure_dt(&config->dr,
+                                              en ? GPIO_INT_EDGE_TO_ACTIVE : GPIO_INT_DISABLE);
+    if (ret < 0) {
+        LOG_ERR("can't set interrupt");
+    }
+}
+
+static int pinnacle_clear_status(const struct device *dev) {
+    int ret = pinnacle_write(dev, PINNACLE_STATUS1, 0);
+    if (ret < 0) {
+        LOG_ERR("Failed to clear STATUS1 register: %d", ret);
+    }
+
+    return ret;
+}
+
+#if 0
+static int pinnacle_era_read(const struct device *dev, const uint16_t addr, uint8_t *val) {
+    int ret;
+
+    set_int(dev, false);
+
+    ret = pinnacle_write(dev, PINNACLE_REG_ERA_HIGH_BYTE, (uint8_t)(addr >> 8));
+    if (ret < 0) {
+        LOG_ERR("Failed to write ERA high byte (%d)", ret);
+        return -EIO;
+    }
+
+    ret = pinnacle_write(dev, PINNACLE_REG_ERA_LOW_BYTE, (uint8_t)(addr & 0x00FF));
+    if (ret < 0) {
+        LOG_ERR("Failed to write ERA low byte (%d)", ret);
+        return -EIO;
+    }
+
+    ret = pinnacle_write(dev, PINNACLE_REG_ERA_CONTROL, PINNACLE_ERA_CONTROL_READ);
+    if (ret < 0) {
+        LOG_ERR("Failed to write ERA control (%d)", ret);
+        return -EIO;
+    }
+
+    uint8_t control_val;
+    do {
+
+        ret = pinnacle_seq_read(dev, PINNACLE_REG_ERA_CONTROL, &control_val, 1);
+        if (ret < 0) {
+            LOG_ERR("Failed to read ERA control (%d)", ret);
+            return -EIO;
+        }
+
+    } while (control_val != 0x00);
+
+    ret = pinnacle_seq_read(dev, PINNACLE_REG_ERA_VALUE, val, 1);
+
+    if (ret < 0) {
+        LOG_ERR("Failed to read ERA value (%d)", ret);
+        return -EIO;
+    }
+
+    ret = pinnacle_clear_status(dev);
+
+    set_int(dev, true);
+
+    return ret;
+}
+#endif
+
+static int pinnacle_era_write(const struct device *dev, const uint16_t addr, uint8_t val) {
+    int ret;
+
+    set_int(dev, false);
+
+    ret = pinnacle_write(dev, PINNACLE_REG_ERA_VALUE, val);
+    if (ret < 0) {
+        LOG_ERR("Failed to write ERA value (%d)", ret);
+        return -EIO;
+    }
+
+    ret = pinnacle_write(dev, PINNACLE_REG_ERA_HIGH_BYTE, (uint8_t)(addr >> 8));
+    if (ret < 0) {
+        LOG_ERR("Failed to write ERA high byte (%d)", ret);
+        return -EIO;
+    }
+
+    ret = pinnacle_write(dev, PINNACLE_REG_ERA_LOW_BYTE, (uint8_t)(addr & 0x00FF));
+    if (ret < 0) {
+        LOG_ERR("Failed to write ERA low byte (%d)", ret);
+        return -EIO;
+    }
+
+    ret = pinnacle_write(dev, PINNACLE_REG_ERA_CONTROL, PINNACLE_ERA_CONTROL_WRITE);
+    if (ret < 0) {
+        LOG_ERR("Failed to write ERA control (%d)", ret);
+        return -EIO;
+    }
+
+    uint8_t control_val;
+    do {
+
+        ret = pinnacle_seq_read(dev, PINNACLE_REG_ERA_CONTROL, &control_val, 1);
+        if (ret < 0) {
+            LOG_ERR("Failed to read ERA control (%d)", ret);
+            return -EIO;
+        }
+
+    } while (control_val != 0x00);
+
+    ret = pinnacle_clear_status(dev);
+
+    set_int(dev, true);
+
+    return ret;
+}
+
+static void pinnacle_report_data(const struct device *dev) {
+    const struct pinnacle_config *config = dev->config;
+    uint8_t packet[3];
+    int ret;
+    ret = pinnacle_seq_read(dev, PINNACLE_STATUS1, packet, 1);
+    if (ret < 0) {
+        LOG_ERR("read status: %d", ret);
+        return;
+    }
+    if (!(packet[0] & PINNACLE_STATUS1_SW_DR)) {
+        return;
+    }
+    ret = pinnacle_seq_read(dev, PINNACLE_2_2_PACKET0, packet, 3);
+    if (ret < 0) {
+        LOG_ERR("read packet: %d", ret);
+        return;
+    }
+    struct pinnacle_data *data = dev->data;
+    uint8_t btn = packet[0] &
+                  (PINNACLE_PACKET0_BTN_PRIM | PINNACLE_PACKET0_BTN_SEC | PINNACLE_PACKET0_BTN_AUX);
+    int16_t dx = (int16_t)(int8_t)packet[1];
+    int16_t dy = (int16_t)(int8_t)packet[2];
+    LOG_DBG("button: %d, dx: %d dy: %d", btn, dx, dy);
+    if (data->in_int) {
+        LOG_DBG("Clearing status bit");
+        ret = pinnacle_clear_status(dev);
+        data->in_int = true;
+    }
+
+    if (!config->no_taps && (btn || data->btn_cache)) {
+        for (int i = 0; i < 3; i++) {
+            uint8_t btn_val = btn & BIT(i);
+            if (btn_val != (data->btn_cache & BIT(i))) {
+                input_report_key(dev, INPUT_BTN_0 + i, btn_val ? 1 : 0, false, K_FOREVER);
+            }
+        }
+    }
+
+    data->btn_cache = btn;
+
+    input_report_rel(dev, INPUT_REL_X, dx, false, K_FOREVER);
+    input_report_rel(dev, INPUT_REL_Y, dy, true, K_FOREVER);
+
+    return;
+}
+
+static void pinnacle_work_cb(struct k_work *work) {
+    struct pinnacle_data *data = CONTAINER_OF(work, struct pinnacle_data, work);
+    pinnacle_report_data(data->dev);
+}
+
+static void pinnacle_gpio_cb(const struct device *port, struct gpio_callback *cb, uint32_t pins) {
+    struct pinnacle_data *data = CONTAINER_OF(cb, struct pinnacle_data, gpio_cb);
+    data->in_int = true;
+    k_work_submit(&data->work);
+}
+
+static int pinnacle_adc_sensitivity_reg_value(enum pinnacle_sensitivity sensitivity) {
+    switch (sensitivity) {
+    case PINNACLE_SENSITIVITY_1X:
+        return PINNACLE_TRACKING_ADC_CONFIG_1X;
+    case PINNACLE_SENSITIVITY_2X:
+        return PINNACLE_TRACKING_ADC_CONFIG_2X;
+    case PINNACLE_SENSITIVITY_3X:
+        return PINNACLE_TRACKING_ADC_CONFIG_3X;
+    case PINNACLE_SENSITIVITY_4X:
+        return PINNACLE_TRACKING_ADC_CONFIG_4X;
+    default:
+        return PINNACLE_TRACKING_ADC_CONFIG_1X;
+    }
+}
+
+static int pinnacle_init(const struct device *dev) {
+    struct pinnacle_data *data = dev->data;
+    const struct pinnacle_config *config = dev->config;
+
+    LOG_WRN("pinnacle start");
+    data->in_int = false;
+    int ret;
+    k_msleep(4);
+    ret = pinnacle_write(dev, PINNACLE_STATUS1, 0); // Clear CC
+    if (ret < 0) {
+        LOG_ERR("can't write %d", ret);
+        return ret;
+    }
+    k_usleep(50);
+    ret = pinnacle_write(dev, PINNACLE_SYS_CFG, PINNACLE_SYS_CFG_RESET);
+    if (ret < 0) {
+        LOG_ERR("can't reset %d", ret);
+        return ret;
+    }
+    k_msleep(20);
+    ret = pinnacle_write(dev, PINNACLE_Z_IDLE, 0x05); // No Z-Idle packets
+    if (ret < 0) {
+        LOG_ERR("can't write %d", ret);
+        return ret;
+    }
+    if (config->sleep_en) {
+        ret = pinnacle_write(dev, PINNACLE_SYS_CFG, PINNACLE_SYS_CFG_EN_SLEEP);
+        if (ret < 0) {
+            LOG_ERR("can't write %d", ret);
+            return ret;
+        }
+    }
+
+    if (config->sensitivity > PINNACLE_SENSITIVITY_1X) {
+        ret = pinnacle_era_write(dev, PINNACLE_ERA_REG_TRACKING_ADC_CONFIG,
+                                 pinnacle_adc_sensitivity_reg_value(config->sensitivity));
+        if (ret < 0) {
+            LOG_ERR("Failed to set ADC sensitivity %d", ret);
+            return ret;
+        }
+    }
+
+    uint8_t feed_cfg2 = PINNACLE_FEED_CFG2_EN_IM;
+    if (config->no_taps) {
+        feed_cfg2 |= PINNACLE_FEED_CFG2_DIS_TAP;
+    }
+    if (config->rotate_90) {
+        feed_cfg2 |= PINNACLE_FEED_CFG2_ROTATE_90;
+    }
+    ret = pinnacle_write(dev, PINNACLE_FEED_CFG2, feed_cfg2);
+    if (ret < 0) {
+        LOG_ERR("can't write %d", ret);
+        return ret;
+    }
+    uint8_t feed_cfg1 = PINNACLE_FEED_CFG1_EN_FEED;
+    if (feed_cfg1) {
+        ret = pinnacle_write(dev, PINNACLE_FEED_CFG1, feed_cfg1);
+    }
+    if (ret < 0) {
+        LOG_ERR("can't write %d", ret);
+        return ret;
+    }
+
+    data->dev = dev;
+
+    pinnacle_clear_status(dev);
+
+    gpio_pin_configure_dt(&config->dr, GPIO_INPUT);
+    gpio_init_callback(&data->gpio_cb, pinnacle_gpio_cb, BIT(config->dr.pin));
+    ret = gpio_add_callback(config->dr.port, &data->gpio_cb);
+    if (ret < 0) {
+        LOG_ERR("Failed to set DR callback: %d", ret);
+        return -EIO;
+    }
+
+    k_work_init(&data->work, pinnacle_work_cb);
+
+    pinnacle_write(dev, PINNACLE_FEED_CFG1, feed_cfg1);
+
+    set_int(dev, true);
+
+    return 0;
+}
+
+#define PINNACLE_INST(n)                                                                           \
+    static struct pinnacle_data pinnacle_data_##n;                                                 \
+    static const struct pinnacle_config pinnacle_config_##n = {                                    \
+        .bus = COND_CODE_1(                                                                        \
+            DT_INST_ON_BUS(0, i2c), (I2C_DT_SPEC_INST_GET(0)),                                     \
+            (SPI_DT_SPEC_INST_GET(0,                                                               \
+                                  SPI_OP_MODE_MASTER | SPI_WORD_SET(8) | SPI_LINES_SINGLE |        \
+                                      SPI_TRANSFER_MSB | SPI_MODE_CPHA,                            \
+                                  0))),                                                            \
+        .rotate_90 = DT_INST_PROP(0, rotate_90),                                                   \
+        .sleep_en = DT_INST_PROP(0, sleep),                                                        \
+        .no_taps = DT_INST_PROP(0, no_taps),                                                       \
+        .sensitivity = DT_INST_ENUM_IDX_OR(0, sensitivity, PINNACLE_SENSITIVITY_1X),               \
+        .dr = GPIO_DT_SPEC_GET_OR(DT_DRV_INST(0), dr_gpios, {}),                                   \
+    };                                                                                             \
+    DEVICE_DT_INST_DEFINE(n, pinnacle_init, NULL, &pinnacle_data_##n, &pinnacle_config_##n,        \
+                          POST_KERNEL, CONFIG_INPUT_INIT_PRIORITY, NULL);
+
+DT_INST_FOREACH_STATUS_OKAY(PINNACLE_INST)
diff --git a/app/module/drivers/input/input_pinnacle.h b/app/module/drivers/input/input_pinnacle.h
new file mode 100644
index 000000000000..58947fa938c6
--- /dev/null
+++ b/app/module/drivers/input/input_pinnacle.h
@@ -0,0 +1,95 @@
+#pragma once
+
+#include <zephyr/device.h>
+#include <zephyr/drivers/spi.h>
+#include <zephyr/drivers/i2c.h>
+
+#define PINNACLE_READ 0xA0
+#define PINNACLE_WRITE 0x80
+
+#define PINNACLE_AUTOINC 0xFC
+#define PINNACLE_FILLER 0xFB
+
+// Registers
+#define PINNACLE_FW_ID 0x00   // ASIC ID.
+#define PINNACLE_FW_VER 0x01  // Firmware Version Firmware revision number.
+#define PINNACLE_STATUS1 0x02 // Contains status flags about the state of Pinnacle.
+#define PINNACLE_STATUS1_SW_DR BIT(2)
+#define PINNACLE_STATUS1_SW_CC BIT(3)
+#define PINNACLE_SYS_CFG 0x03 // Contains system operation and configuration bits.
+#define PINNACLE_SYS_CFG_EN_SLEEP BIT(2)
+#define PINNACLE_SYS_CFG_SHUTDOWN BIT(1)
+#define PINNACLE_SYS_CFG_RESET BIT(0)
+
+#define PINNACLE_FEED_CFG1 0x04 // Contains feed operation and configuration bits.
+#define PINNACLE_FEED_CFG1_EN_FEED BIT(0)
+#define PINNACLE_FEED_CFG1_ABS_MODE BIT(1)
+#define PINNACLE_FEED_CFG1_DIS_FILT BIT(2)
+#define PINNACLE_FEED_CFG1_DIS_X BIT(3)
+#define PINNACLE_FEED_CFG1_DIS_Y BIT(4)
+#define PINNACLE_FEED_CFG1_INV_X BIT(6)
+#define PINNACLE_FEED_CFG1_INV_Y BIT(7)
+#define PINNACLE_FEED_CFG2 0x05             // Contains feed operation and configuration bits.
+#define PINNACLE_FEED_CFG2_EN_IM BIT(0)     // Intellimouse
+#define PINNACLE_FEED_CFG2_DIS_TAP BIT(1)   // Disable all taps
+#define PINNACLE_FEED_CFG2_DIS_SEC BIT(2)   // Disable secondary tap
+#define PINNACLE_FEED_CFG2_DIS_SCRL BIT(3)  // Disable scroll
+#define PINNACLE_FEED_CFG2_DIS_GE BIT(4)    // Disable GlideExtend
+#define PINNACLE_FEED_CFG2_ROTATE_90 BIT(7) // Swap X & Y
+#define PINNACLE_CAL_CFG 0x07               // Contains calibration configuration bits.
+#define PINNACLE_PS2_AUX 0x08               // Contains Data register for PS/2 Aux Control.
+#define PINNACLE_SAMPLE 0x09                // Sample Rate Number of samples generated per second.
+#define PINNACLE_Z_IDLE 0x0A                // Number of Z=0 packets sent when Z goes from >0 to 0.
+#define PINNACLE_Z_SCALER 0x0B              // Contains the pen Z_On threshold.
+#define PINNACLE_SLEEP_INTERVAL 0x0C        // Sleep Interval
+#define PINNACLE_SLEEP_TIMER 0x0D           // Sleep Timer
+#define PINNACLE_AG_PACKET0 0x10            // trackpad Data (Pinnacle AG)
+#define PINNACLE_2_2_PACKET0 0x12           // trackpad Data
+#define PINNACLE_REG_COUNT 0x18
+
+#define PINNACLE_REG_ERA_VALUE 0x1B
+#define PINNACLE_REG_ERA_HIGH_BYTE 0x1C
+#define PINNACLE_REG_ERA_LOW_BYTE 0x1D
+#define PINNACLE_REG_ERA_CONTROL 0x1E
+
+#define PINNACLE_ERA_CONTROL_READ 0x01
+#define PINNACLE_ERA_CONTROL_WRITE 0x02
+
+#define PINNACLE_ERA_REG_TRACKING_ADC_CONFIG 0x0187
+
+#define PINNACLE_TRACKING_ADC_CONFIG_1X 0x00
+#define PINNACLE_TRACKING_ADC_CONFIG_2X 0x40
+#define PINNACLE_TRACKING_ADC_CONFIG_3X 0x80
+#define PINNACLE_TRACKING_ADC_CONFIG_4X 0xC0
+
+#define PINNACLE_PACKET0_BTN_PRIM BIT(0) // Primary button
+#define PINNACLE_PACKET0_BTN_SEC BIT(1)  // Secondary button
+#define PINNACLE_PACKET0_BTN_AUX BIT(2)  // Auxiliary (middle?) button
+#define PINNACLE_PACKET0_X_SIGN BIT(4)   // X delta sign
+#define PINNACLE_PACKET0_Y_SIGN BIT(5)   // Y delta sign
+
+struct pinnacle_data {
+    uint8_t btn_cache;
+    bool in_int;
+    const struct device *dev;
+    struct gpio_callback gpio_cb;
+    struct k_work work;
+};
+
+enum pinnacle_sensitivity {
+    PINNACLE_SENSITIVITY_1X,
+    PINNACLE_SENSITIVITY_2X,
+    PINNACLE_SENSITIVITY_3X,
+    PINNACLE_SENSITIVITY_4X,
+};
+
+struct pinnacle_config {
+#if DT_INST_ON_BUS(0, i2c)
+    const struct i2c_dt_spec bus;
+#elif DT_INST_ON_BUS(0, spi)
+    const struct spi_dt_spec bus;
+#endif
+    bool rotate_90, sleep_en, no_taps;
+    enum pinnacle_sensitivity sensitivity;
+    const struct gpio_dt_spec dr;
+};
diff --git a/app/module/dts/bindings/input/cirque,pinnacle-common.yaml b/app/module/dts/bindings/input/cirque,pinnacle-common.yaml
new file mode 100644
index 000000000000..fd1d6826df7d
--- /dev/null
+++ b/app/module/dts/bindings/input/cirque,pinnacle-common.yaml
@@ -0,0 +1,18 @@
+properties:
+  dr-gpios:
+    type: phandle-array
+    description: Data ready pin for the trackpad
+  rotate-90:
+    type: boolean
+  sleep:
+    type: boolean
+  no-taps:
+    type: boolean
+  sensitivity:
+    type: string
+    enum:
+      - 1x
+      - 2x
+      - 3x
+      - 4x
+    description: ADC attenuation (sensitivity) setting.
diff --git a/app/module/dts/bindings/input/cirque,pinnacle-i2c.yaml b/app/module/dts/bindings/input/cirque,pinnacle-i2c.yaml
new file mode 100644
index 000000000000..da2603a73b06
--- /dev/null
+++ b/app/module/dts/bindings/input/cirque,pinnacle-i2c.yaml
@@ -0,0 +1,6 @@
+description: |
+  Sensor driver for the Cirque Pinnacle trackpad ASICs, using the I2C interface
+
+compatible: "cirque,pinnacle"
+
+include: ["i2c-device.yaml", "cirque,pinnacle-common.yaml"]
diff --git a/app/module/dts/bindings/input/cirque,pinnacle-spi.yaml b/app/module/dts/bindings/input/cirque,pinnacle-spi.yaml
new file mode 100644
index 000000000000..0bd70ee15d48
--- /dev/null
+++ b/app/module/dts/bindings/input/cirque,pinnacle-spi.yaml
@@ -0,0 +1,6 @@
+description: |
+  Sensor driver for the Cirque Pinnacle trackpad ASICs, using the SPI interface
+
+compatible: "cirque,pinnacle"
+
+include: ["spi-device.yaml", "cirque,pinnacle-common.yaml"]
diff --git a/app/module/dts/bindings/vendor-prefixes.txt b/app/module/dts/bindings/vendor-prefixes.txt
new file mode 100644
index 000000000000..4466d52c1e9e
--- /dev/null
+++ b/app/module/dts/bindings/vendor-prefixes.txt
@@ -0,0 +1 @@
+cirque	Cirque Corporation