forked from onitake/gsl-firmware
-
Notifications
You must be signed in to change notification settings - Fork 0
/
README.md.template
20 lines (19 loc) · 1.7 KB
/
README.md.template
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
<manufacturer_short_name>/<device_short_name>
---------------------------------------------
| Item | Description |
|---------------------------|-------------|
| Manufacturer | The name of the device manufacturer |
| Device | The full name of the device, including a version or product code if there are multiple revisions |
| Website | http://.../products/device |
| Vendor driver (Windows) | ftp://.../drivers/device/driver.zip |
| Extracted firmware | [firmware.fw](firmware.fw) |
| Firmware for gslx680-acpi | [silead_ts.fw](silead_ts.fw) |
| Display resolution | The resolution of the display, such as 1920x1200 |
| Touch panel resolution | The resolution of the touch screen, usually smaller than the display resolution |
| Touch controller | GSLxxxx, you should open your device and verify this |
| Multitouch support | Yes (number of recognized touch points) or No if unsupported. All Silead chips should support 5 or 10 touch points. |
| Finger tracking | Yes, if the chip already does finger tracking, No if software finger tracking needs to be enabled in the driver |
| Mirrored horizontally | Yes, if the touch screen is mirrored along the X axis, i.e. left and right are reversed, otherwise No |
| Mirrored vertically | Yes, if the touch screen is mirrored along the Y axis, i.e. top and bottom are reversed, otherwise No |
| Axes swapped | Yes, if the touch screen is rotated by 90 degrees, i.e. moving from left to right results in movement from top to bottom |
| Comments | The exact fwtool command line used to generate silead_ts.fw or other relevant information |