03_RunningBundleOfRuns.md

Running more than one REMIND scenario

Oliver Richters, 10 January, 2022

The folder config in your REMIND folder contains a number of csv files that start with scenario_config. Those files are used to start a bundle of runs each with different configurations.

You can start such a bundle of REMIND runs using the settings from a scenario_config_XYZ.csv with:

Rscript start.R config/scenario_config_XYZ.csv

The scenario_config files are csv files using ; as their delimiter. They can be edited with a text editor, or opened with a spreadsheet software (Excel, LibreOffice Calc). Viewed as a spreadsheet, the first row contains the column titles, while subsequent rows each contain a different remind run.

In Excel, you might need to select the first column, choose Data and Text to Columns and set the right delimiter ; to see the csv-file spread over the columns. Save the config file as a csv file with ; as delimiter. You can check that, for example, by opening the csv in a text editor. If the delimiter is not ;, change it in Windows under Control Panel -> Region -> Additional Settings -> List separator.

Example for a scenario_config of REMIND

Those two columns are mandatory and usually placed at the beginning:

• title labels that run. It contains a unique identifier for each run that must only consist of letters, digits, _ and -. The more runs you will have, the more it will be important that you label them in a way such that you easily remember the specific settings you chose for this run.
• start can be used to start specified runs by default or sort the runs into different groups. By default, only runs which have 1 in their start column will be started. It often makes sense to keep some runs in the csv file to remember their configurations, but not start them by default. You can do this by either setting start to 0, so they will never be started; or by setting start to a custom group like calibrate (for calibration runs), so they will only be started when this group is selected. You can specify multiple groups, separated by commas, then the run will be part of all of the groups. To specify which group to start, either run ./start.R --interactive and select the group, or run e.g. start.R startgroup=calibrate config/scenario_config.csv directly.

The column copyFromConfig allows to specify a scenario from the same config file. All empty cells are copied from this scenario, allowing to generate scenario variations efficiently. Nested assignment is allowed, so NDC can specify Base here, and Policy can specify NDC, so if both Policy and NDC don't specify a certain switch, the value is taken from Base. The only restriction is that the scenario specified in the copyFromConfig cell must be defined in an earlier row. To get the full settings for a specific scenario (here: SSP2-Base in scenario_config.csv) including those copied, run in your REMIND folder:

source("scripts/start/readCheckScenarioConfig.R"); source("scripts/start/path_gdx_list.R")
readCheckScenarioConfig("config/scenario_config.csv")["SSP2-Base", ]

Further columns are the configurations that you can choose for the specific runs. They may contain values for parameters such as cm_rcp_scen and module realizations such as exponential for ./module/carbonprice/. They overwrite the default defined and explained in ./config/default.cfg and ./main.gms by the respective cell value for each run. If you leave a cell empty or if no column exists for a setting, the default value is used.

An important feature of scenario_config files is the possibility to execute runs which build on each other. Examples are (1) using the base run for all time steps until cm_startyear, or (2) use it to compare the impact of certain policies to a situation without them. Such a “subsequent run“ has to wait until its “base run“ is finished, and then will be started automatically using the data from the base run.

Important: Do not make changes to the REMIND code until the last run has started running GAMS (including subsequent runs). Don't git checkout other branches or manually edit REMIND files.

Example with comments and different ways to specify subsequent runs.

The columns to implement subsequent runs are usually found at the end, starting with path_gdx:

• path_gdx allows to specify initial conditions for the run, overwriting the usual initial conditions taken from the calibration files found in ./config/gdx-files/. If it points to an unconverged run, this can be used to restart runs, similar to Rscript start.R --restart.
• path_gdx_bau points to the run used as business as usual (BAU) scenario, for example for runs using 45_carbonprice/NDC, where some countries specify emission as percentage reduction compared to BAU. All realizations needing it should be summarized in scripts/start/needBau.R.
• path_gdx_carbonprice can be used to use a carbon tax path from an earlier run with realization 45_carbonprice/exogenous.
• path_gdx_ref points to the run used for all t < cm_startyear, which can be used for example for delayed transition scenarios.
• path_gdx_refpolicycost points to the run that is used as a comparison for the policy cost calculation. If no such column exists, path_gdx_ref is used instead.

These columns starting with path… can point to either finished runs or other rows of the current model execution:

• provide a path to an existing gdx file such as ./output/SSP2-Base_2021-12-24_19.30.00/fulldata.gdx. For subfolders of ./output/, writing the folder name SSP2-Base_2021-12-24_19.30.00 is sufficient.
• provide the entry of a title of another row, such as SSP2-Base.
  • If the run with this title is set to start = 1, then runs that point to this title are turned into “subsequent runs“ that will be started after the linked one is finished. Note that in this case, the REMIND code must not change until the full.gms file of the last subsequent run was generated.
  • If the run with this title is set to start = 0 or does not exist in the scenario_config_XYZ.csv file, the function configureCfg from configureCfg.R searches in ./output for folder with that title which contain a fulldata.gdx and whose full.log states *** Status: Normal completion, and then picks the one with the latest date and time in the folder name.
  • If no run is found, the script also looks in cfg$modeltests_folder and so if you use a title of a scenario from the automated model tests in scenario_config_AMT.csv, the most recent of these run is picked which is useful for testing purposes.

The image above shows these possibilities used for path_gdx_ref. Run RCP20 has a complete path specified but will not be executed because start = 0. RCP37 provides a complete folder name and therefore starts immediately using the fulldata.gdx from this folder, RCP26_subsequent waits for SSP2-Base to be finished, and RCP26_forceoldrun selects the latest already finished SSP2-Base run in the output folder and starts immediately. If you set start = 0 also for SSP2-Base, then RCP26_subsequent will also try to find an old run in a folder that looks like SSP2-Base_YYYY-MM-DD_HH.MM.SS. Note that the fact that “subsequent“ is part of the title is only to ease the understanding, you can name these runs however you want.

The column slurmConfig can be used to specify the slurm configuration, either as a string or as an integer that selects the corresponding mode from choose_slurmConfig.R.

Everything in the row after a # is interpreted as comment. Best use it as first character in the first column to structure the file. Using # elsewhere else can lead to unexpected data losses of the cells that follow in the row. If you want to switch off the use of a column, either temporarily or to add some comments, add a dot before the parameter name, which then may read .cm_startyear and is then ignored.

Before you start the runs, you can test whether the right runs would be started and find all necessary gdx files:

Rscript start.R --test config/scenario_config_XYZ.csv

If you want to check also whether the different runs compile correctly, run

Rscript start.R --gamscompile config/scenario_config_XYZ.csv

Running the complete chain of runs, but only for one region and one iteration, can be started with:

Rscript start.R --quick config/scenario_config_XYZ.csv

If you want to manually start runs instead of editing the start column in the config file, start:

Rscript start.R --interactive config/scenario_config_XYZ.csv

In interactive mode, the scripts lets you select a config file if you do not specify one. You can combine options such as

Rscript start.R --quick --interactive
Rscript start.R -qi

The latter uses shortcuts, meaning i for --interactive, q for --quick. The shortcut t for --test avoids that anything is executed, g for gamscompile avoids that actual runs are started. See Rscript start.R --help for further information.

Further notes:

• The cells need not contain only a single value, but for example module realization 47_regipol/regiCarbonPrice allows to specify in the parameter cm_emiMktTarget to enter comma separated values 2020.2050.USA.all.year.netGHG 1, 2020.2050.all.EUR.year.netGHG 1 to specify emission goals for multiple regions.

• To compare a scenario_config*.csv file to the current default configuration, you can run Rscript -e "remind2::colorScenConf()" in your REMIND directory and select the file you are interested in. colorScenConf() produces a file ending with _colorful.xlsx in the same directory and provides you with information how to interpret the colors within.

• To compare two scenario_config*.csv files, for example after a change, run Rscript -e "remind2::compareScenConf()" in your REMIND directory to get a human-readable list of changes with further options offered in the function description, or try these git commands:

git diffmif scenario_config_1.csv scenario_config_2.csv
git diff --word-diff=color --word-diff-regex=. --no-index scenario_config_1.csv scenario_config_2.csv

• As noted above, while the bundle is running, you may not change the code or git checkout another branch, because that would disturb runs which are started later. If you want to work on other things in REMIND while the bundle is running, you should therefore make a copy of the REMIND clone before starting the bundle. On linux, use rsync for a fast copy:

rsync -a --exclude='/output/' /path/to/remind/ /path/to/remind-copy

replace /path/to/remind/ with the path to remind, and /path/to/remind-copy with the desired path for the remind copy. Note that you have to use a / at the end of the existing path, and no / at the end of the new path.

After the run is finished, you can use mv to move the output folder generated in the copy back into the main folder, to have all your run output in one place:

mv /path/to/remind-copy/output/* /path/to/remind/output/