eGeoffrey
Feed/Notifiction/Log #112
Replies: 3 comments
-
|
[This post has been migrated from the old forum, it was originally sent by user2684 on 2020-10-06 11:37:19] @eporocrail said in Feed/Notifiction/Log:
Definitely something I need to look and reproduce, thanks for reporting.
This should happen only if under "Setup" / "Web Interface" the option is selected (should be off by default). Isn't it the case? |
Beta Was this translation helpful? Give feedback.
-
|
[This post has been migrated from the old forum, it was originally sent by eporocrail on 2020-10-06 11:44:16] I just had a look. When I activate the setting on "Setup/Web Interface" than indeed numerous sensor events are popping up. Default it is not activated, OK. My problem was that I did not recollect that I had to set the severity of a rule to "NONE" to get rid of pop-ups. |
Beta Was this translation helpful? Give feedback.
-
|
[This post has been migrated from the old forum, it was originally sent by user2684 on 2020-10-06 11:57:40] @eporocrail said in Feed/Notifiction/Log:
"none" and "debug" severity really deserve a better naming and explanation, point taken. Thanks! |
Beta Was this translation helpful? Give feedback.
-
[This post has been migrated from the old forum, it was originally sent by eporocrail on 2020-10-03 09:28:42]
@user2684
Observation:
The "feed" and the "notification" only present the latest information at the point in time the data are requested by the user.
When new sensor data arrive this is not reflected until the user refreshes the web page.
The "log" is updated real time. As soon as a sensor receives new data this is visible instantaneously.
On the screen where data is presented with widgets, pop-up messages appear when sensor data arrive.
These pop-up messages are blending the presentation of the data. The right part of the screen is during the presence of the pop-up partly covered.
Would it be possible to have it user selectable to turn these pop-up messages on or of? During testing it might be handy to have these pop-ups but during normal operations it is annoying.
Every now and then one is getting lost. The messages popping-up are generated by rules. The user can manipulate the behaviour of those messages already.
Beta Was this translation helpful? Give feedback.
All reactions