Time not set

[Creo2005]

Yes

[HennieLP]

You just uploaded your WiFi name and password

[Creo2005]

I don't see a problem :) It's okay.

[HennieLP]

you know that Wifi Search Engines Exist? Where you can see The Precice location of the WiFi

[Creo2005]

Вы знаете, что существуют поисковые системы Wi-Fi? Где вы можете увидеть Точное местоположение WiFi

OK, changed :)

[HennieLP]

you probably have to delete the message because you can see the edited message and ist content before. pleas open the Issue again

[Creo2005]

I can't delete this Issues

[HennieLP]

can you delete the initial mesage?

[HennieLP]

which button did you press the to set the time?

[Creo2005]

which button did you press the to set the time?

[Creo2005]

which button did you press the to set the time?

my settings

[HennieLP]

i see to set the Time Corect Pleas unplug the Clock Set The time Manualy To 12 A clock and then Plug the Clock back in then The Clock shud Show The correct time

[Creo2005]

Я вижу, чтобы установить правильное время. Пожалуйста, отключите часы. Установите время вручную на 12 часов, а затем снова подключите часы, затем часы должны показать правильное время.

That is, just turn it off, set it to 12 hours and turn it on and do not press anything?

[HennieLP]

yes

[Creo2005]

It was 18:17, now it's 15:17 :(

[HennieLP]

it your time zone is False pleas Try EET-2EEST,M3.5.0/3,M10.5.0/4

[Creo2005]

it your time zone is False pleas Try EET-2EEST,M3.5.0/3,M10.5.0/4

I tried it from star, but set then EET-2EEST,M3.5.0/3,M10.5.0/4 is 1 hour less than what I have in Kyiv

[Creo2005]

Is it possible to make the clock get the time from the router? Is it on my openwrt or does it determine the location and set the time automatically by the IP address of the provider?

[HennieLP]

currently it dosent set the Time zone automaticly but cud be added in the Future

[Creo2005]

it your time zone is False pleas Try EET-2EEST,M3.5.0/3,M10.5.0/4

I tried it from star, but set then EET-2EEST,M3.5.0/3,M10.5.0/4 is 1 hour less than what I have in Kyiv

?

[HennieLP]

how late is it curently in Kyiv ?
21:41?

[Creo2005]

how late is it curently in Kyiv ? 21:41? yes

at this moment- 22:06

[HennieLP]

then EET-2EEST,M3.5.0/3,M10.5.0/4 shud be right

[HennieLP]

made a test Script where The current time gets sent via Serial you just have to Set the Wifi and the Password Manualy in the Code
test.zip

[Creo2005]

ЕЕТ-2ЕЭСТ,М3.5.0/3,М10.5.0/4

then EET-2EEST,M3.5.0/3,M10.5.0/4 shud be right

will not be correct for 1 hour already tried

[HennieLP]

what happens if you run the Test script

[Creo2005]

made a test Script where The current time gets sent via Serial you just have to Set the Wifi and the Password Manualy in the Code test.zip

it's hard for me to make a test script, I have a bare board soldered on. It's dreary, you need to unsolder everything, flash it and then solder it again.

[Creo2005]

made a test Script where The current time gets sent via Serial you just have to Set the Wifi and the Password Manualy in the Code test.zip

I will flash for another board and look at the com port. but tomorrow

[Creo2005]

what happens if you run the Test script

with the test correctly shows the time in the com port

[Creo2005]

made a test Script where The current time gets sent via Serial you just have to Set the Wifi and the Password Manualy in the Code test.zip

What changes are needed in the code besides changing the time zone?

[HennieLP]

nothing is needet to be changed in the code every thing can be changed on the Web interface

[Creo2005]

nothing is needet to be changed in the code every thing can be changed on the Web interface

Only change time zone?

[HennieLP]

you can set the time zone Via Webinterface

[Creo2005]

you can set the time zone Via Webinterface
I know this, but what time zone should I put in order for the clock to run correctly?

[HennieLP]

EET-2EEST,M3.5.0/3,M10.5.0/4

[Creo2005]

EET-2EEST,M3.5.0/3,M10.5.0/4

I set it from start working clock, but the clock showed 1 hour less than necessary

[HennieLP]

but the test script shows the correct time witch uses the same code as the Clock

[Creo2005]

I set time zone to EET-2EEST,M3.5.0/3,M10.5.0/4

pressed the button

set 12 hours
turned on the clock and it set the time 1 hour too late!
Nothing has changed

[HennieLP]

pleas dont pres the button beacause it is curently Work in progress

[Creo2005]

then it is not at all understood how to set the initial time on the clock

[HennieLP]

If it’s a new esp or completely erased esp you at first set the clock manually to 12 a clock then you set the time zone then you set the WiFi and after that you whait then Every thing schud work as planed

[HennieLP]

made a test Script where The current time gets sent via Serial you just have to Set the Wifi and the Password Manualy in the Code test.zip

it's hard for me to make a test script, I have a bare board soldered on. It's dreary, you need to unsolder everything, flash it and then solder it again.

You cud Solder 4 wires directly to the Chip and flash it that way without having to completely solder everything

[TIlya95]

Why is the time on the clock different after a reboot?

[TIlya95]

I have to set a different time zone, you need to change the time zone to display the time correctly