diff --git a/docs/extras/transfer_sd.md b/docs/extras/transfer_sd.md
index a61276a6..cfb86a41 100644
--- a/docs/extras/transfer_sd.md
+++ b/docs/extras/transfer_sd.md
@@ -46,4 +46,4 @@ You should first check whether you have a file or partition based emuMMC:
 14. Restore the backup by tapping on both `SD emuMMC BOOT0 & BOOT1` and `SD emuMMC RAW GPP` (Note: raw gpp may take a while).
     - It is very important that for both of these the `SD emuMMC Raw Partition` option is enabled, otherwise you will be altering your sysMMC
       which is not what you want.
-15. Your emuMMC is now restored on the new SD card and you should be able to launch it from `Launch` -> `Atmosphere FSS0 EmuMMC`  in hekate.
+15. Your emuMMC is now restored on the new SD card and you should be able to launch it from `Launch` -> `Atmosphere FSS0 emuMMC` in hekate.
diff --git a/docs/extras/updating.md b/docs/extras/updating.md
index 0e17534b..7f84ab5b 100644
--- a/docs/extras/updating.md
+++ b/docs/extras/updating.md
@@ -101,7 +101,7 @@ If you keep your emuMMC offline, you will have to use a gamecard to update your
 
 ### Updating your emuMMC with Daybreak
 
-1. In Hekate go to `Launch -> Atmosphere FSS0 Emu`.
+1. In Hekate go to `Launch -> Atmosphere FSS0 emuMMC`.
 2. Once booted, hold `R` while launching a game to boot into the homebrew menu.
 3. Find Daybreak in the homebrew menu and launch it.
 4. Tap on `Install` and navigate to `tegraexplorer/Firmware/<latest firmware number>`.
diff --git a/docs/files/emu/hekate_ipl.ini b/docs/files/emu/hekate_ipl.ini
index f8e3a456..9cc4768c 100644
--- a/docs/files/emu/hekate_ipl.ini
+++ b/docs/files/emu/hekate_ipl.ini
@@ -1,21 +1,20 @@
 [config]
 updater2p=1
-{------ Atmosphere ------}
-[Atmosphere FSS0 EmuMMC]
+
+[Atmosphere FSS0 emuMMC]
 fss0=atmosphere/package3
 kip1=atmosphere/kips/*
 emummcforce=1
 icon=bootloader/res/emu_boot.bmp
-{}
-[Atmosphere FSS0 SYS]
+
+[Atmosphere FSS0 sysMMC]
 fss0=atmosphere/package3
 kip1=atmosphere/kips/*
 emummc_force_disable=1
 icon=bootloader/res/sys_cfw_boot.bmp
-{}
-{-------- Stock ---------}
-[Stock SYS]
+
+[Stock sysMMC]
 fss0=atmosphere/package3
-stock=1
 emummc_force_disable=1
+stock=1
 icon=bootloader/res/stock_boot.bmp
diff --git a/docs/files/sys/hekate_ipl.ini b/docs/files/sys/hekate_ipl.ini
index e2afb45f..855c0c65 100644
--- a/docs/files/sys/hekate_ipl.ini
+++ b/docs/files/sys/hekate_ipl.ini
@@ -1,15 +1,14 @@
 [config]
 updater2p=1
-{------ Atmosphere ------}
-[Atmosphere FSS0 SYS]
+
+[Atmosphere FSS0 sysMMC]
 fss0=atmosphere/package3
 kip1=atmosphere/kips/*
 emummc_force_disable=1
 icon=bootloader/res/sys_cfw_boot.bmp
-{}
-{-------- Stock ---------}
-[Stock SYS]
+
+[Stock sysMMC]
 fss0=atmosphere/package3
-stock=1
 emummc_force_disable=1
-icon=bootloader/res/stock_boot.bmp
\ No newline at end of file
+stock=1
+icon=bootloader/res/stock_boot.bmp
diff --git a/docs/user_guide/emummc/launching_cfw.md b/docs/user_guide/emummc/launching_cfw.md
index 92d0b5cb..92febdcf 100644
--- a/docs/user_guide/emummc/launching_cfw.md
+++ b/docs/user_guide/emummc/launching_cfw.md
@@ -14,7 +14,7 @@ Unlike systems such as the DSi, Wii, or 3DS, Switch CFW is currently volatile. I
 !!! tip ""
     1. Power on your Switch into RCM, and inject the Hekate payload
     2. Navigate to `Launch` using the touch screen
-    3. Find `Atmosphere FSS0 EmuMMC` and launch it
+    3. Find `Atmosphere FSS0 emuMMC` and launch it
 
 Your Switch is now booting into Atmosphere.
 
@@ -62,4 +62,4 @@ You will now be able to launch the Homebrew Menu by opening the album or by hold
 ### Updating your setup
 
 !!! tip ""
-	Whenever a new Switch firmware update releases you may need to update your files to be able to use CFW on the new version. Make sure to follow the instructions on [this page](../../extras/updating.md) to update your setup correctly.
\ No newline at end of file
+	Whenever a new Switch firmware update releases you may need to update your files to be able to use CFW on the new version. Make sure to follow the instructions on [this page](../../extras/updating.md) to update your setup correctly.
diff --git a/docs/user_guide/sysnand/launching_cfw.md b/docs/user_guide/sysnand/launching_cfw.md
index ace6ea7b..48d57e37 100644
--- a/docs/user_guide/sysnand/launching_cfw.md
+++ b/docs/user_guide/sysnand/launching_cfw.md
@@ -11,7 +11,7 @@ Unlike systems such as the DSi, Wii, or 3DS, Switch CFW is currently volatile. I
 !!! tip ""
     1. Power on your Switch into RCM, and inject the Hekate payload
     2. Navigate to `Launch` using the touch screen
-    3. Find `Atmosphere FSS0 SYS` and launch it
+    3. Find `Atmosphere FSS0 sysMMC` and launch it
 
 Your Switch is now booting into Atmosphere.
 
@@ -59,4 +59,4 @@ You will now be able to launch the Homebrew Menu by opening the album or by hold
 ### Updating your setup
 
 !!! tip ""
-	Whenever a new Switch firmware update releases you may need to update your files to be able to use CFW on the new version. Make sure to follow the instructions on [this page](../../extras/updating.md) to update your setup correctly.
\ No newline at end of file
+	Whenever a new Switch firmware update releases you may need to update your files to be able to use CFW on the new version. Make sure to follow the instructions on [this page](../../extras/updating.md) to update your setup correctly.