Skip to content

Latest commit

 

History

History
224 lines (163 loc) · 8.53 KB

README.md

File metadata and controls

224 lines (163 loc) · 8.53 KB
Raw

PEERING client controller

The PEERING client controller is a set of scripts to ease configuration and operation of a PEERING client, able to connect to PEERING muxes and announce PEERING prefixes.

Recent changes

  • We have recently merged the -c and -C parameters used to attach communities to announcements. The functionality is identical to before, but the interface for specifying communities has changed.

Installation

After cloning this repository, follow the following instructions to install software dependencies and set up your PEERING client.

Software dependencies

The client runs OpenVPN to connect directly to PEERING muxes and the BIRD software router to establish BGP sessions and perform announcements.

You must have a pre-2.0 version of Bird to use the PEERING client. You can compile Bird from source after downloading the source from http://bird.network.cz/?download.

You can also install these dependencies from your distro repository; on Debian use apt-get install openvpn bird. However, ensure that Bird is a pre-2.0 version.

PEERING account setup

To establish OpenVPN tunnels with PEERING muxes, you will need PEERING-issued certificates. You can get certificates by submitting a project proposal on our website. Copy your certificate files into certs/ and rename them as client.crt, and client.key. Then chmod 400 all files in certs/ to prevent unauthorized access to your keys.

You will also need to explicitly create a prefixes.txt file containing the prefixes you are going to announce. This is an extra safety net. Specify one prefix per line, in the usual format, e.g., 184.164.236.0/24.

Controlling OpenVPN

usage ./peering openvpn status|up mux|down mux

Both OpenVPN and BIRD have to run with superuser rights, you may want to run the provided scripts as root or suid the script. When controlling OpenVPN, we support three operations:

  • peering openvpn status: show the status of OpenVPN tunnels. Tunnels can be either up or down. If a tunnel is up, we will also list the device (the interface) it is running on and the local IP address. You can use ip route to identify the IP address of the remote end as the gateway associated with each tunnel.

  • peering openvpn up|down mux: bring the tunnel up to mux up or down. Muxes are identified by their nicknames, which you can check by running openvpn status above.

Controling BIRD

usage: ./peering bgp cli|start|status|stop|adv mux

We support five operations to interact with BIRD:

  • peering bgp start|stop: start or stop the BIRD software router. BIRD is preconfigured to establish BGP sessions with all PEERING muxes through OpenVPN tunnels. Use OpenVPN to create tunnels to the muxes you want BIRD to establish BGP sessions with. Starting or stopping bird will establish and close all BGP sessions automatically.

  • peering bgp status: show the status of the BIRD software router. If BIRD is running, it will show the status of BGP all sessions. Sessions in Idle state are waiting for their respective OpenVPN tunnels to be established. Sessions in the Established state are exchanging routes.

  • peering bgp adv mux: show which prefixes are being advertised to mux. This is useful when debugging announcements.

  • peering bgp cli: open the BIRD command line interface. Type '?' in the BIRD interface to see a list of possible commands. Use at your own risk.

Controlling prefix announcements

usage: peering prefix announce|withdraw [-m mux]
                                        [-p poison | [-P prepend] [-o origin]]
                                        [-c id1] ... [-c idN]
                                        prefix

We also provide support for announcing and withdrawing PEERING prefixes. Be sure to use only prefixes allocated to you, or your announcements will be filtered at PEERING servers. When announcing or withdrawing prefixes, we support the following options:

  • [-m mux]: control which mux to announce or withdraw from. Use the mux nickname as shown by openvpn status. The default is to announce and withdraw from all muxes (anycast).

  • [-p asn]: poison a given ASN, i.e., prepend the announcement to include asn in the AS-path and trigger BGP loop prevention. Also known as BGP poisoning. [default: do not poison]

  • [-P N]: prepend the origin ASN N times. Cannot be combined with -p, can be combined with -o. [default: 0]

  • [-o asn]: change the origin ASN, i.e., the first ASN in the AS-path, to asn. Cannot be combined with -p, sets -P to 1 if not specified. [default: unchanged (47065)]

  • [-c id]: add community (47065,id) to the announcement, making sending the announcement through the peer identified by id only. Can be used multiple times to send announcements through multiple peers. Click here for a list of PEERING peers.

Controlling TinyProxy

usage ./peering proxy start|stop|status

Both OpenVPN and TinyProxy have to run with superuser rights. The proxy for a given mux's container needs to start after the OpenVPN tunnel is established, or TinyProxy will be unable to bind to the right IP address.

This script reads your container's allocated prefix ID from a file named container.txt. This information is necessary to compute prefixes and install routes, you can find it on the PEERING website dashboard.

  • peering proxy start mux: start the proxy for communicating with the container on the given mux.

  • peering proxy stop mux: stop the proxy for the mux passed as parameter. Use all to stop all proxies.

  • peering proxy status: show the status of running proxies.

Bringing up a proxy prints relevant information to access and interact with that mux's container.

TinyProxy addresses for isi01 (tap2, 2)
  local address: 100.66.128.6:8802
  subnet: 100.125.16.8/30
  pidfile: /home/cunha/git/peering/client/var/tinyproxy.isi01.pid
  logfile: /home/cunha/git/peering/client/var/tinyproxy.isi01.log
updating (add) 100.125.16.8/30 via 100.66.128.1 dev tap2
updating (add) 2804:269c:ff03:2:2::/80 via 2804:269c:ff00:2:1::1 dev tap2

After the proxy is configured, you can start using it on the container by setting the http_proxy environment variable to match TinyProxy's local address (above).

export http_proxy=http://100.68.128.8:8805/

You can SSH into your container by using the second host in the /30 subnet. You should login as root using your private key:

ssh -i ~/.ssh/peering_id_rsa [email protected]

Guidelines

Follow these guidelines when using your PEERING client:

  • Do not announce prefixes that are not allocated to your experiment. Do not announce prefixes outside of PEERING address space. (The PEERING prefix control script will print a list of valid PEERING prefixes if you input an incorrect one.)

  • Similarly, do not spoof packets with source IP addresses outside the PEERING address space allocated to your experiment.

  • Do not change announcements more than once every 90 minutes. This ensures your experiment is not affected by route-flap dampening and avoids attracting complaints operators.

  • Be conservative. Routers are often running close to their limits and we do not want any breakage. In particular, do not announce AS-paths with more than 5 AS-hops, do not announce paths containing AS-sets with more than 5 ASes, and do not announce paths with more than 5 attached communities.

Limitations and extending the controller

The control scripts allow you to quickly start using PEERING. They do not cover all possible uses of PEERING. If you need to perform more complex announcements (e.g., make BGP announcements with BGP communities attached), these scripts provide a useful starting point.

More informations

More informations about PEERING configuration:

Python library

The peering.py module can be imported into Python programs to programmatically control announcements. It is tested in python3 and depends on jsonschema and jinja2. Announcements are specified in JSON; the JSON schema is described in configs/announcement_schema.json. You should edit the allocatedPrefixes entry in the JSON schema to the prefixes allocated to your experiment.