RELEASE_NOTES

************************************
** Greaseweazle Tools Release Notes
** Keir Fraser <keir.xen@gmail.com>
************************************

** v1.16.2 - 23 November 2023
 - DCP, DIM: Fix image import
 - Flux: Emit one revolution of flux where possible, rather than two

** v1.16.1 - 19 October 2023
 - Revert to emitting two revolutions of flux from codecs (fixes SCP output)
 - SCP, Kryoflux: Allow #revs to be specified in output (eg. name.scp::revs=3)

** v1.16 - 15 October 2023
 - New formats: pc98.n88basic.hd, zx.quorum.800
 - HFEv3: Fix import of some images
 - CAPS: Support CT Raw files
 - D88: Support multiple disk images in one file
 - Kryoflux: Allow sample clock to be specified

** v1.15.1 - 31 July 2023
 - Fix import of Kryoflux raw files (broken in v1.14)

** v1.15 - 22 July 2023
 - New board type: V4.1 (AT32F4xx, USB-C)

** v1.14 - 2 July 2023
 - Windows 64-bit: Install correct 64-bit version of CAPS/SPS IPF library
 - Windows 32-bit: Install 32-bit versions of required MSVCR DLLs
 - Now require Python 3.8 or later
 - TD0: Support advanced compression blocks

** v1.13 - 4 June 2023
 - Generate a x64 Windows build in addition to x32
 - New disk formats:
  - Generic IBM track scanner: ibm.scan
  - General Music: gem.1600
  - TRS CoCo OS-9, MM/1 OS-9: coco.os9.*, mm1.os9.*
  - Commodore 1571 (C64) GCR: commodore.1571
 - New image formats:
   - D71: C64 CBMDOS GCR 1571 double-sided disk
   - TD0: IBM sector format (Read only)
   - EDSK: Support writing new EDSK images (gw read --format=ibm.scan my.edsk)
 - gw read/write: New option --dd to set interface pin 2 for 5.25" drives
 - C64: New low-pass filter PLL stage to clean up noisy flux images
   - Can also be used more generally via a new sub-option to "--pll"

** v1.12 - 12 May 2023
 - New disk formats:
   - Commodore 1541 (C64) GCR: commodore.1541
   - IBM: ibm.320
   - Dragon32, Dragon64: dragon.*
   - Tandy CoCo: coco.*
 - New image format: D64 (C64 CBMDOS GCR disks)
 - ibm: Improve layout of very full tracks
 - ibm: Warn on oversize tracks (data too large to fit)
 - ibm: Allow gapbyte value to be specified in diskdef
 - d88: Remove duplicate sectors from oversize tracks

** v1.11 - 4 May 2023
 - New disk formats:
   - Macintosh GCR: mac.400, mac.800
   - DEC: dec.rx01, dec.rx02
   - MSX: msx.1d, msx.1dd, msx.2d, msx.2dd
   - Osborne 1: occ1.sd, occ1.dd
 - HFE: Support interface= and encoding= header bytes
 - TRS-80: Support FA DAM mark for directory sectors
 - Applesauce: Support decoding *.a2r Applesauce image files
 
** v1.10 - 7 April 2023
 - New diskdef "ibm.160"
 - gw erase: New option --revs=N
 - gw read: Fix --retries=0
 - MacOS: Explicitly search for CAPS library under /Library/Frameworks
 - gw: Minor fixes to flux-to-bitcell conversion
 - gw: Disallow abbreviated long option names
 - SCP: Fix footer metadata format

** v1.9 - 1 March 2023
 - HFE: Support reading and writing HFEv3 image files
   - For example: gw convert Game.ipf Game.hfe::version=3
   - Useful for running converted IPFs on FlashFloppy Goteks
 - MSA: Read & write Atari ST MSA image files
 - D88: Remove hard-coded track double-stepping
 - TSC Flex: Add diskdef disk definitions
 - Various bug fixes

** v1.8 - 4 February 2023
 - IMD: Read & write IMD image files
 - IMG, diskdef: Allow sector padding in IMG files
 - gw read: No seeking to cyl 0 on retry, by default
 - HFE: Fix data rate of FM tracks
 - SCP: Fix checksum calculation, and verify on import

** v1.7 - 29 January 2023
 - Bug fix release: Fix reading IPF images with weak tracks

** v1.6 - 28 January 2023
 - diskdefs: Fix atari.90 and zx.trdos.640
 - DCP image read support (obscure PC98 image format)
 - Fix discontinuity at index mark when writing perfect flux images
 - Emit a write-splice (WRSP) block when writing SCP images
 - read, convert: Fix off-by-one error when printing summary

** v1.5 - 4 January 2023
 - User-configurable disk formats: New option --diskdefs
 - New disk formats: ensoniq.mirage and sci.prophet
 - Fill missing/bad sectors with "-=[BAD SECTOR]=-" pattern

** v1.4 - 4 December 2022
 - Read support for DIM, FDI, HDM, XDF, and D88 image formats
   - Primarily used with Japanese computers
 - Renamed pc98.hd and pc98.dd formats to pc98.2hd and pc98.2dd
 - Fixed head count on pc98.2hd and pc98.2dd formats
 - Support pc98.2d format (used e.g. by PC-88 and X1)
 - Support pc98.2hs format (used primarily by late PC-98)

** v1.3 - 1 September 2022
 - gw: New formats ibm.800 and ibm.2880
 - gw: New image format *.MGT

** v1.2 - 1 August 2022
 - gw read, gw convert: Allow PLL parameters to be specified
 - Try fallback conservative PLL on difficult tracks
 - Kryoflux: Emit info block with Greaseweazle and frequency details

** v1.1 - 18 July 2022
 - New IMG formats: pc98.dd, pc98.hd
 - IBM FM, MFM: Fix bugs in raw track decoder
 - gw info: Report MCU information (type, speed, SRAM)

** v1.0 - 18 June 2022
 - New IMG formats:
   - ibm.1680, ibm.dmf
   - akai.800, akai.1600
   - ensoniq.800, ensoniq.1600
 - FM/MFM: Report unexpected sectors when reading
   - Gives a hint that the format specifier is incorrect
 - Minor bugfixes

** v0.42 - 7 April 2022
 - Mac/Linux: Further improve Python source installation 

** v0.41 - 5 April 2022
 - Mac/Linux: Fix build dependencies for Python source installation 

** v0.40 - 3 April 2022
 - gw update: Allow update from a specified GitHub release tag
 - Python: Proper setuptools-based installation
 - Various minor fixes

** v0.39 - 27 February 2022
 - Fix crashes in the USB.seek error path
 - Support Atari 90kB format (atari.90)

** v0.38 - 28 January 2022
 - gw rpm: Print 3 decimal places, and print summary stats
 - gw read,convert: Rename --rpm to --adjust-speed
   - Accepts a SPEED value in units of rpm, ms, us, ns, or scp ticks
 - gw read,write,erase: New option --fake-index
   - Ignore real index pulses
   - Generate fake index pulses at specified SPEED
 - gw read,write,convert: Format decoders automatically adjust track speed
   - Usually there is no need to specify --rpm (now --adjust-speed)
 - gw read: Re-seek via cylinder 0 every N retries
 - gw erase: New option --hfreq to write a high-frequency flux signal
   - Usually reads back as a "No Flux Area"

** v0.37 - 10 January 2022
 - Require Python >= v3.7 (ignore this for Windows binary builds)
 - Logging output to stderr is now buffered no more than per-line
 - HFE: Auto-detect output bitrate if possible, else require on command line
 - gw convert: Fix crash when printing summary information
 - gw convert: Fix --tracks= handling to respect step= and hswap
 - gw convert: New option --out-tracks to allow step= and hswap override
 - D81 (commodore.1581): Fix sector header H field: should be swapped

** v0.36 - 5 January 2022
 - Tools now require firmware >= v0.31
 - New commands: gw convert, gw rpm
 - gw read, gw convert: New option --no-clobber prevents file overwrites
 - gw read: Save partial output image file on ctrl-c
 - gw read: Option --rate replaced by HFE sub-option 'bitrate'
 - gw read: New option --raw forces raw flux output even if --format specified
 - Recognise new third-party hardware: "Adafruit Floppy Generic"
 - Sanity check TRK0 signal after every head seek
 - Rename sega.sf7 format to sega.sf7000
 - New --tracks sub-option hswap: Treat side 1 as side 0 and vice versa
 - ibm mfm, fm: Fix parsing sectors that extend past end of dump
 - All output is now to stderr (consistent, and unbuffered)

** v0.35 - 30 December 2021
 - Fix Windows distribution to include optimised data routines
 - Support Sega SF-7000 disk format (sega.sf7) and .SF7 image suffix

** v0.34 - 28 December 2021
 - Firmware is now released separately from the host tools
 - gw update: Automatically download the latest firmware from GitHub
 - Fix read/write raw files (HFE, SCP, etc) when --format is specified
 - Allow Acorn ADF images to be read and written using --format specifier
 - Support SCP images containing Supercard Pro C64 dumps including halftracks

-------------------------------------------------------------------------
All versions below include firmware and host tools in a combined release.

** v0.33 - 14 December 2021
 - Support high-density Amiga images (1760kB ADF)
 - IPF: Automatic write verification
 - New format specifiers for Acorn DFS and ADFS
 - New image handlers for Acorn: ADS, ADM, ADL, SSD, DSD

** v0.32 - 14 December 2021
 - New format specifiers for IBM, Atari ST and Commodore 1581
 - New image handlers for *.ST and *.D81

** v0.31 - 8 October 2021
 - F1: Support Low-Density STM32F103C6 chips, 32k Flash, 10k SRAM
 - V4: Increase USB buffer size from 16kB to 64kB

** v0.30 - 12 August 2021
 - New board type: V4 Slim (AT32F403 MCU, laptop drive interface)
 - F7 Slim: Support Disk Change Detect (used by WinUAE floppy bridge)

** v0.29 - 29 July 2021
 - gw read/write: Fix memory leak, reducing memory usage by approx 10x
 - gw bandwidth: Test USB connection integrity
 - New board type: F1 Plus (Unbuffered)

** v0.28 - 22 June 2021
 - V4: Improve USB bandwidth and double MCU clock speed to 144MHz
   - Fixes "gw bandwidth" warnings
 - Firmware: New command CMD_NOCLICK_STEP.
   - Used by Rob Smith's WinUAE bridge to implement noclick
 - "gw pin": Split into "gw pin set" and "gw pin get"

** v0.27 - 12 May 2021
 - EDSK: Support writing KBI-19 protection tracks
 - EDSK: Support next IDAM in preceding sector's GAP
 - gw seek: New option --motor-on to enable drive motor while seeking
 - New firmware command: CMD_GET_PIN to interrogate input floppy pins
 - New board type: V4 (using AT32F4xx MCUs)
 - New board type: F1 Plus (enhanced BP adapter board by Monideth Pen)

** v0.26 - 26 March 2021
 - Support new Greaseweazle model: F7 v3 "Thunderbolt"
 - EDSK: Support for writing many protected EDSK files
 - Windows 7: Disable jumperless firmware update as it hangs.
 - Default head-step delay is doubled to 10ms.

** v0.25 - 27 February 2021
 - EDSK: Support for writing unprotected EDSK files
 - SCP: Allow disktype header byte to be specified (eg "a.scp::disktype=amiga")
 - SCP: Fix import of non-index-cued SCP imnage files
 - AmigaDOS: Mark bad sectors with explicit pattern "-=[BAD SECTOR]=-"
 - read/write: Add a --retries parameter used if analyse/verify stage fails
 - clean: New command to clean a drive using a cleaning disk
 - gw: New global option --time to print elapsed time taken by an operation
 - gw: Improve reliability of USB connection reset when starting an operation
 - flippy: Improve reliability for Panasonic modded drives (find true trk0)
 - Linux/Mac: setup.sh better error reporting when run from wrong folder

** v0.24 - 14 January 2021
 - Index-cue generated Kryoflux and SCP image files
   - Most external tools and emulators fail with non-cued streams
 - gw write: New precomp command-line option (see the wiki)
 - gw: Backward compatibility with older firmware (only back to v0.23)
 - Safer bootloader update (CRC check before erasing existing bootloader)

** v0.23 - 13 January 2021
 - Support new Greaseweazle model: F7 Slim
 - Read/write/verify 1.44M IMG image files
 - Read/write Kryoflux stream files
 - Optimisations:
   - Rewrite read/verify conversion routines in C
   - Fast Amiga track reads (now read an Amiga disk in approx 45 seconds)
 - Shrink the Windows distribution zip file
 - GW: New track-selection syntax ("--track="). See the wiki.

** v0.22 - 27 November 2020
 - Support read and write of Amiga ADF image files
 - Increase /STEP pulse width to 15us (fix 5.25" drive seek for Arno Olaf)
 - Flippy drives: support 'gw seek' down to track -8
 - Revised USB protocol

** v0.21 - 10 September 2020
 - Support new Greaseweazle model: F7 Lightning Plus
 - Fixes for older drives
   - 50us index mask, avoid double triggering on the index signal
   - Increase default head-step delay to 5ms
 - Windows: Install the CAPS/SPS IPF library automatically
 - New command 'gw seek' to seek to specified drive cylinder
 - New syntax for specifying Greaseweazle device name on command line
   - eg 'gw read --device COM3 a.scp'

** v0.20 - 1 July 2020
 - gw write: New options --erase-empty and --double-step
 - gw update: Fix COM redetect on Windows running Bitdefender
 - Support version 2 of Ant Goffart's F7 Plus
 - SCP: support legacy single-sided SCP images
   - Automatic import; Export via ::legacy_ss suffix
     - eg. gw read --single-sided my.scp::legacy_ss
 - SCP: support SCP image files generated by FluxEngine

** v0.19 - 8 June 2020
 - F7 v2: Support for the new board design
 - gw update: Signature and CRC validation checks
 - gw read: Fix end-track field in single-sided SCP images

** v0.18 - 28 May 2020
 - gw read: New parameters --rate and --rpm
   - rate: Bitcell data rate in kbit/s (eg 250=DD 500=HD)
     - Used only for HFE images right now, where default is DD (250)
   - rpm: Normalise track timings to the given RPM value
     - This occurs before any other conversion or analysis
 - gw info: New command to display information about the Greaseweazle setup
 - gw bandwidth: Improved stats output
 - SCP: Fix single-sided image handling according to latest SCP spec.
   - Operates correctly with latest beta version of HxC software
 - F7: Support new board designs
   - AmberTronic F7 Plus: Kryoflux form factor, output buffers, 12v supply
   - F7 Lightning: High Speed USB, output buffers

** v0.17 - 19 May 2020
 - Windows: New self-contained executable distribution
   - No need to install Python, or module dependencies
 - Mac, Linux: Main script is directly executable
   - No need to manually invoke the Python interpreter
 - GW host tool: Help-text description for each available action

** v0.16 - 15 May 2020
 - F7 Firmware: Enable over-drive voltage mode
   - Required for reliable 216MHz operation (see datasheet)
 - Bootloader update:
   - 'gw.py update --bootloader' updates the bootloader
   - Not normally required
   - Failure may brick the Weazle and require full reflash: Take care!
 - Update build system to work with Windows MinGW environment

** v0.15 - 5 May 2020
 - Host tool improvements:
   - IPF: More robust conversion to raw flux for writeout
   - HFE: Fix crash when writing out HFE from third party tools
   - F7 Firmware improvements:
     - Preparation for High Speed USB (future board using 730Z8 MCU)
     - Enable Instruction and Data caches (10x execution speedup)
     - Various improvements to bandwidth as reported by 'gw.py bandwidth'
     
** v0.14 - 29 April 2020
 - IPF: Full write support (weak data, index misalignment)
 - New GW commands: bandwidth, erase
   - bandwidth: Measure USB read/write bandwidth
   - erase: Erase a disk
 - F7 USB: Improved bandwidth when writing to disk
   - Much less likely to see FluxUnderflow failures
 - update: Fix a bug which could fail to reopen the GW device for update
 - update: Automatically find the update file if filename not specified
 - Control script: Tidier notification of errors (no scary backtrace)

** v0.13 - 25 April 2020
 - HFE: Read & write support
 - IPF: Preliminary write support
   - Requires SPS/CAPS support library. See the wiki.
   - Weak data not yet supported (RNC "Protect Process" protection, & others)
   - Write splice is always rotated to the index (affects Speedlock & others)
   - Also TODO: Verified writes
 - USB: Use the VID:PID pair assigned to Greaseweazle (1209:4d69)
 - New prerequisite: 'bitarray' module. See the wiki.

** v0.12 - 10 March 2020
 - GW Autodetect: General improvements, and now works on Windows 7
 - New read parameter --double-step to double-step drive heads
   - Useful for reading a 40-cylinder disk in an 80-cylinder drive
 - New 'pin' command allows a floppy pin to be set to specified level
   - Currently supported only for pin 2 (DENSEL)
 - New 'reset' command resets the Greaseweazle to power-on settings
   - Motors off, drives deselected, power-on pin levels and delay values

** v0.11 - 21 January 2020
 - GW.py: Auto-detect the COM/serial port device name
   - The device argument is now optional!
 - USB: Provide a serial-id string to the host
   - Identifier is unique to each Greaseweazle device
   - Allows disambiguation between multiple Greaseweazle devices
   - Recommended: Full flash from HEX file (embeds serial in bootloader)
 - Ubuntu: Udev script now creates a /dev/greaseweazle symlink

** v0.10 - 17 January 2020
 - STM32F7xx: Multi-drive support via drive-select config option
   - Up to three Shugart drives or two IBM/PC drives
   - gw.py read|write --drive {a,b,0,1,2}
   - See the "Drive Select" wiki page

** v0.9 - 7 January 2020
 - Activity LED
   - Lights while a USB-issued command is in progress
   - Flashes when enumerated but idle in the firmware-update bootloader

** v0.8 - 6 January 2020
 - STM32F73xx: Various Fixes and Improvements
   - Allow Firmware Update mode to be forced via strapping Serial RX/TX
   - Fix bogus sample values at start of read flux values
   - Fix some time constants to be in units of the sample clock
 - USB: Advertise USB 2.0 device descriptor

** v0.7 - 6 December 2019
 - USB: Fix end-of-stream detection on track writes
   - Writes of empty/unformatted tracks sometimes hung forever
 - No Flux Area: Firmware automatically masters long NFAs during track writes
   - Generating no flux transitions does not read back as a NFA
 - STM32F73xx: Initial support for new STM32 MCU
   - Two HEX files are included: Use Greaseweazle-F1-* for existing boards!
   - Single unified UPD file containing both firmware images

** v0.6 - 15 November 2019
 - gw.py: Big overhaul of underlying Python package
   - Action (read, write, update) must come first on the command line
   - eg. "python3 gw.py read --ecyl=39 foo.scp COM3"
 - gw.py: New action "delays" to print/set delay parameters
   - eg. "python3 gw.py delays --step=10000" to increase step time to 10ms

** v0.5 - 11 November 2019
 - USB: Overhaul the protocol and allow writes to be terminated at index
   - Terminate-at-index is always used by current Python control script
   - Terminate-at-index prevents an over-long write from overwriting itself
   - Fix interruption of track writes (eg. KeyboardInterrupt)
 - gw.py: New option --adjust-speed to normalise flux times for target drive
   - Measures RPM of the target drive and calculates an adjustment factor

** v0.4 - 5 November 2019
 - Blinky: Diagnostic test firmware to detect fake STM32 chips
   - https://github.com/keirf/greaseweazle/wiki/STM32-Fakes
 - Floppy Write: Fix for very short flux timings
 - Floppy Read: Fix for very long flux timings
 - USB: Small improvement to double-buffer logic

** v0.3 - 30 October 2019
 - Bootloader: Fix Programming-Jumper detection
 - Read Track: Various minor fixes
 - SCP: Fix the SCP file headers generated by "gw.py read"
 ** IMPORTANT USER INSTRUCTIONS **:
 - Users must serial-update using the v0.3 HEX file
   - DO NOT update from v0.2 using the UPD file
 - May need to install the crcmod package: eg "pip3 install crcmod"

** v0.2 - 29 October 2019
 - USB: Fix hangs during "gw.py read"
   - Thanks to Charlie Smurthwaite for telling me how to fix this!
 - USB: Improved bandwidth (double-buffered IN/OUT endpoints)
   - Reduces risk of buffer underflow/overflow during disk operations
 - Firmware Update: Requires a jumper across A14 (aka DCL) and GND
   - eg. "python gw.py update Greaseweazle-v0.2.upd COM3"

** v0.1 - 17 October 2019
 - First release