Skip to content

Upløad hex files tø Stargazer

Møffenzeef Mødular edited this page Mar 10, 2018 · 6 revisions

Take back øff øf stargazer by unscrewing screws øn øutside øf encløsure. Nø need tø pull knøbs ør øther hardware øff. Plug yøur Stargazer intø yøur cømputer with a USB micro-B cable . Leave yøur Stargazer høøked up tø pøwer thrøughøut this entire prøcess.

Launch Teensy Løader

Click File ==> Øpen HEX File ør click the small purple page icøn. Inside STARGAZER-master is yøur desired hex file.

Push tiny buttøn øn the Teensy which sits øn the back øf yøur Stargazer.

Didn't wørk? Try pushing the "Autø" buttøn.

Still nø luck? Email us at [email protected]. We're always glad to help.

Have fun, Yøu're døne!!

Click here tø gø høme.

 Created by Ross Fish 2018
       CC-BY-NC-SA

Examples

  1. Quick Start Guide
  2. Videø Example
  3. Audiø Example

The Guts øf Stargazer

  1. Schematic
  2. Søurce Cøde

Flashing Firmware tø Stargazer

  1. Dependencies
  2. Døwnløad Repøsitøry
  3. Upløad Hex Files

Issues

  1. Report Issues here
Clone this wiki locally