Colloquy

Overview

Colloquy is a library to build USSD applications in Ruby. It's a high-level full stack framework and addresses all common USSD needs: examples including building and managing a menu in USSD, accessing services over HTTP or even writing a hangman game.

Philosophy

• Ruby is more often than not the best DSL.
• Stay as close to the USSD spec as possible. Use the same terminology when possible.
• Be fast.
• Make BDD or TDD easy to do.
• Address real world needs, so handle slow backends gracefully and provide helpers for all common tasks.

Prerequisites

You'll need to have a basic understanding of how USSD applications work. The most common example of a USSD application is how folks check balance on a mobile phone: on Vodafone India for example, this is by dialing *141#. This special "phone number" is a USSD code.

This (old) presentation can help explain the underpinnings of this library, and how the concepts in the USSD spec map to this library: USSD Renderer Redux.

Installing for Core Development

Note: you only need to do this if you intend to tweak the Colloquy code itself. If you just want to develop USSD applications, see Installation for Flow Developers.

First install rvm and ruby > 1.9.3.

Then do:

$ bundle install

Writing Flows

Basic Terms

• Flow: a collection of a set of USSD responses that are sent to a MS in response to a USSD query. Often, a USSD flow is the same as as USSD Application
• Mobile Subscriber (or just MS): This is a terminal device (usually a mobile phone) used to send and receive mobile messages.
• Application: A USSD Application which is most often just one flow, but can be a collection of flows working together to provide a service to a mobile subscriber.

Introduction

While programming using Colloquy, Flows are collections of Nodes. Each Node has two blocks: a Request block that sends a USSD request to an MS and a Process block where the response received from an MS is analysed. The initial node is by convention named index.

A typical USSD request-response would follow this path:

Index Node -> Request -> Prompt for Input from MS -> Process -> Another Node ... (and so on)

Thus Flows traverse from Node to Node, and at each step, uses a Prompt to ask the MS for more Input. Flows end when Notify is used to tell the MS that the USSD Session is now over.

Writing your first flow

See Installation for Flow Developers first.

Flows are just Ruby classes with a module {Colloquy::FlowParser} mixed in. This module in addition to providing the class with some special statements (like prompt and notify) also has some meta-programming magic to make writing flows simpler. If you've ever worked with Adhearsion dialplans, this will look similar, but it has some quirks of its own.

Before we start, if you'd like to just jump in, there are several examples available in the examples/ directory if you've cloned the Git repository. See {CalculatorFlow} for a jumpstart.

This is a simple flow:

class HelloWorldFlow
  include Colloquy::FlowParser

  index {
    request {
      prompt "Enter your name: "
    }

    process { |input|
      notify "Hello #{input}!"
    }
  }
end

We begin a normal Ruby class definition, include the flow parser module and start writing the index node by writing index and then opening up a curly braces pair. Nested within the index node, you have two blocks: a request block and a process block.

Remember: the request block always asks for input, and the process block always analyses it. This is a convention that you should stick to throughout Colloquy flows to ensure readable and idiomatic flows.

To run this flow:

• Save this as lib/hello_world_flow.rb

• Add a line to app/config/flows.yaml under active:

    - hello_world
  

• Run this in the simulator:

    $ bundle exec colloquy -s app
    Please enter flow name:
    hello_world
    Please enter msisdn:
    111
    Please enter session_id:
    1212
    Initial input (for direct flow):
    > (press Enter)
    Hello World
    ---Flow complete---
    --Going back to beginning of flow--
    Initial input (for direct flow):
    > quit
    Bye!
  

  Note: quit exits the simulator.

Congrats, you've written and tested your first flow!

Writing More Complex Flows

Colloquy comes with a lot of helper methods that allow for complex USSD applications to be built. Here are some of its features:

• A Menu is one of the most common elements of an interactive USSD flow. This is what a simple menu looks like:

    index {
      request {
        menu << :add << :subtract
      }
  
      process { |input|
        notify "You selected #{menu.key(input)}"
      }
    }
  

  which renders to:

  1. Add
  2. Subtract
  Enter your choice:
  

  Colloquy comes built in with a very capable menu that can paginate larger menus automatically, provide different prefixes and suffixes on each page, and automatically map user input to descriptive menu keys.

• A helper method called url that is a wrapper around Colloquy::URLAgent. This is a robust library that calls HTTP URLs in an evented fashion and supports fallback URLs for a single service.

• Many other evented helpers, redis, scribe and mysql to access these servers and a settings helper to read in configuration.

More Example Flows

Checkout the code and take a look at the examples/ directory. There are a lot more flows in there:

• active_record_flow: Connects to ActiveRecord. Configuration in config/mysql.yaml
• art_of_war_flow: Run this flow to see how menu pagination works seamlessly.
• calculator_flow.rb: A simple calculator in USSD.
• crossover_flow.rb: This describes the syntax for switching between flows.
• database_flow.rb: The raw evented mysql helper (without ActiveRecord). Configuration in config/mysql.yaml
• hangman_flow.rb: A simple hangman game in USSD.
• metadata_flow.rb: Describes how to access request metadata (for e.g. parameters like mobile number location passed in from the stub) within the flow.
• pagination_flow: A menu with a long prefix.
• pass_flow: Describes the pass special statement that is used mostly in direct entry flows.
• scribe_flow: for the scribe helper. Configuration in config/scribe.yaml
• settings_flow: for the settings helper. Configuration in config/settings.yaml
• url_flow: for the url helper. Configuration in config/urls.yaml

Deployment Concepts

A USSD application running under Colloquy typically has these components running end-to-end from mobile subscriber to the flow running inside:

Mobile Subscriber <--> Mobile Operator <--> USSD Gateway <--> Gateway Middleware (or Stub) <--> Colloquy <--> Flow

You can see then that Colloquy is just a small piece of the pie. To deploy USSD applications, you'll have to get connectivity to a USSD gateway that can send and receive USSD messages to and from mobile subscribers. This usually involves talking to a mobile network operator in your country to see if they can provide you access.

Depending on what kind of platform your mobile operator's USSD gateway is developed in, you will also have to write some sort of gateway middleware (some folks call this a 'stub') to connect Colloquy to the operator's USSD gateway. USSD gateways are usually proprietary solutions and they differ from gateway to gateway. As of now, Colloquy does not come with any default stubs, but these should be simple to write because Colloquy is flexible enough to speak any protocol and language. In the ideal scenario, you'll just use a stub that can send and process HTTP requests served by the Colloquy Server.

What if you do not have connectivity to a gateway? Colloquy provides a simulator that can simulate a mobile subscriber and allow you to run your flow.